Table of Contents
Hidden Hitch was a brand owned by the same company that has since dissolved, so the hitch labeled with the Draw-Tite sticker and number is now the part number for both. The brand name was the only difference so now they just all have the Draw-Tite sticker so if you have found a Hidden Hitch it is just old stock.
Are curt and Draw-Tite the same?
The Curt and Draw-Tite Hitches have the same maximum Gross Trailer Weight, however, the Curt hitch has a larger maximum tongue weight capacity of 525 lbs. compared to Draw-Tite’s 300 lbs. However, you are limited by your vehicle’s tongue weight capacity of 200 lbs. so both will work for your needs.
What is a hideaway hitch?
What Is a Gooseneck Hideaway Hitch? A gooseneck trailer hitch connects to a ball mounted in the center of a truck’s bed, which creates balanced weight distribution by shifting the load from the end of the bed to over the rear axle. These hitches offer the highest available towing capacity for noncommercial vehicles.
Who owns Hidden hitch?
That’s because the three biggest names in custom trailer hitches-Draw Tite, Hidden Hitch and lesser-known Reese-are all owned by the same company: Cequent Group.
Who makes Draw-Tite hitches?
Draw-Tite is owned by parent company Horizon Global; their hitches are manufactured in Mexico.
Is Draw-Tite a good brand?
Draw-Tite Hitches – Quality Craftsmanship They also use this advanced technology to fully lab-test their hitches’ performance, structural strength, and safety. Draw-Tite Hitches come in the full range of Class I-V ratings up to 10,000 lbs GTW, so you can find the perfect hitch for your towing needs.
Is draw tight a good hitch?
The DrawTite hitch is very good quality and a lot less expensive than OEM.
How does a hidden hitch work?
This setup moves the weight of the trailer over the vehicle’s rear axle, as opposed to a receiver hitch at the tail end, resulting in weight distribution that is more balanced. It’s the reason vehicle manufacturers give pickups towing with a gooseneck hitch (and fifth-wheels) the highest towing capacities.
What is a hidden cross tube?
What does “concealed cross tube” mean. asked by: Beth. Expert Reply: What that means is that the cross section of the hitch that runs side to side is completely out of sight once it’s installed onto the vehicle.
Is Reese same as Draw Tite?
The Reese and Draw-Tite products are manufactured by the same parent company, this means that the # 26102 and # 26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems.
Who makes trailer hitches?
Eau Claire, WI — July 4, 2017 — CURT, the leading manufacturer of USA-made hitches and a complete line of towing products, is celebrating its 24th year of American manufacturing.
Where is Draw-Tite located?
Currently, Draw-Tite manufactures over 750 different trailer hitches and over 600 accessories and parts covering approximately 3850 vehicle applications. We operate a manufacturing facility totaling 100,000 square feet of state-of-the-art production capabilities in Goshen, Indiana.
What does a Draw-Tite Activator do?
Draw-Tite’s Activator electronic trailer brake control begins applying the trailer’s brakes electronically as soon as the brake pedal is engaged, unlike pendulum models which react to inertia created after the tow vehicle’s brakes have already begun to stop.
What is a Draw-Tite Activator 2?
Timed brake controls are great choices for your basic economical light-duty towing needs. These time actuated controls have solid state electronics and can be mounted in any position – horizontal, vertical, even turned upside down. Category: BRAKE CONTROLERS.
What is a Class III hitch?
Class III hitches used as weight carrying are rated up to 6000 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight (TW) of 600 lbs. Class III hitches used for weight distributing are rated up to 10,000 lbs.
Where are hidden hitches made?
Hidden Hitch and Draw-Tite Hitches are manufactured in Mexico by Cequent Performance products. They’ve been around a long time, they make a quality product and they do an excellent job of standing behind their products.
What is a Class 3 receiver?
Class 3 trailer hitches pull heavier loads on passenger vehicles and full-sized trucks. These hitches are extremely sturdy and range from 3,500 to 8,000 pounds towing capacity. These hitches also offer higher tongue weight capacities of between 350 to 800 pounds.
What is the tongue weight on a trailer hitch?
Tongue weight is simply the downward force that the tongue of the trailer exerts on the hitch that is connected to the vehicle. Too little tongue weight can cause the back end of the vehicle to lift which can result in a very dangerous condition known as trailer sway.
Why do you need a drop on a trailer hitch?
The main reason that you will need a drop hitch is a simple yet important one – it’s to keep the trailer level while it is attached to your tow vehicle. Having a level trailer setup is extremely important when towing.
Does a drop hitch affect towing capacity?
It doesn’t reduce the gross trailer weight capacity, only the tongue weight.
Can you attach a trailer to a car without a hitch?
Using a vehicle with a suitable hitch installed is recommended for safety; however, it is sometimes possible to pull a bumper-pull style trailer a short distance without a hitch. Gooseneck and fifth-wheel style trailers cannot be towed without a hitch designed for their unique configurations.
Can you add a tow package aftermarket?
You can get an aftermarket tow package with the Class V hitch hardware, but if your truck is only rated for a maximum towing capacity of 2,000 pounds, then 2,000 pounds is all you can practically get out of the whole thing.
Can you put a hitch on any car?
The short answer to that question is that yes, it probably is possible. Almost any vehicle is a capable of towing a trailer. Even a small car can benefit from the installation of a trailer hitch. In some cases, you will only be able to tow a very small trailer.
