Table of Contents
Can you use cup pulls on upper cabinets?
Available in a variety of sizes, shapes and finishes, they can be used on upper cabinets, lower cabinets and drawers. For lower cabinets the same measurements apply but on the upper corner. On drawers smaller than 24” in width one knob is installed in the center of the drawer door.
Can Cup pulls be used on cabinet doors?
You can use cup pulls on drawers, knobs on cabinet doors, and pulls on pull-outs or appliances – or any variation of that! Incorporating each type of hardware works very well in larger kitchens, or in kitchens that have an island feature.
Where do you put cup pulls on drawers?
Cup Pulls: Cup pulls are only ever used on drawers, and I like to center them in the middle of the drawer slab. If you have a 5 piece drawer (top and bottom rails, inside panel, and side rails) you want to make sure the hardware itself will fit (centered) in the middle panel before purchasing and installing.
What is the most common type of drawer pull?
Bar Pulls – These tend to be the most common type of pull we see. They work well on most styles of cabinet door, from shaker to more contemporary, because there are almost endless varieties, sizes, and styles available.
Where do cup handles go on kitchen drawers?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
Which is better cabinet knobs or pulls?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
What size pulls for upper cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
How do you measure cup pulls on a drawer?
Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. This is the measurement required when selecting replacement pulls.
Where do knobs and pulls go on Shaker cabinets?
Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.
Should kitchen handles be vertical or horizontal?
The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.
Should my kitchen cabinet pulls match my faucet?
Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.
What is the most popular kitchen hardware?
Bar pulls remain the most popular kitchen cabinet hardware. They look classic, come in a variety of finishes and are usually quite affordable when purchased in bulk.
What are standard drawer pull sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).
Should drawer pulls be centered?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
Can you mix knobs and pulls in a kitchen?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
How long should cabinet pulls be?
While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Do cabinets look better with hardware?
Hardware presents an ideal opportunity to show off your style. With so many designs and finishes to choose from, cabinet hardware is an ideal way to add a little signature style to your kitchen. It worked for The Everygirl co-founder Danielle Moss in her white kitchen featuring sleek, high-contrast black hardware.
Should drawers have knobs or pulls?
One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull. It is much more comfortable to open a drawer using a pull.
Should kitchen cabinets have knobs or handles?
Should I use knobs or pulls on kitchen cabinets? Whether you should use knobs or pulls for your kitchen cabinets is up to personal preference. Knobs can be the more comfortable option for cabinet doors because your hand rotates naturally as you open them.
