Table of Contents
Best Deck Screws For Pressure Treated Woods To Make A Perfect Deck. Developing a deck requires a lot of preparation and understanding, whether you’re a pro or a do-it-yourselfer. Galvanized, ceramic coated, or stainless steel screws are the best corrosion-resistant fasteners for pressure-treated cedar or redwood.
Can you use ceramic coated screws in treated lumber?
Ceramic coated screws can be used with both pressure treated lumber and composite decking. A more widely seen option is epoxy coated deck screws.
What type of screws are best for pressure treated wood?
If you use regular screws with pressure treated wood, they may bend or slip and can become corroded by the preservative chemicals contained in the wood. Thus, we recommend using 305 or 18-8 grade stainless steel screws with an advanced anti-corrosive coating, like the Hillman Fasteners’ DeckPlus 48419 screws.
Can you use composite deck screws on treated lumber?
From hardwoods to treated lumber, to composite and capstock decking, or even metal framing; DecksDirect can provide the perfect fasteners and lags to complete your project without rusting, splitting or mushrooming your material.
Do you need special screws for pressure treated wood?
No special fasteners are required when building with borate pressure treated wood.” The fasteners used with the product shall be carbon steel, galvanized steel, stainless steel, copper, and silicon bronze.”.
Can you use zinc coated screws in pressure treated wood?
Fasteners for preservative-treated wood shall be of hot dipped zinc-coated galvanized steel, stainless steel, silicon bronze or copper. In the absence of manufacturer’s recommendations, a minimum of ASTM A653 type G185 zinc-coated galvanized steel, or equivalent, shall be used.
Can you use yellow zinc screws in pressure treated wood?
We do not recommend electro-galvanized screws (also called clear-zinc coated) for exterior applications. They will corrode quickly in contact with the elements. Mechanically galvanized screws are generally suitable for decks and other outdoor projects made of pressure-treated lumber.
Can you use stainless steel screws in treated lumber?
Corrosion-resistant stainless steel screws, nails and bolts in grades 304 and 305 can be used for copper-treated wood in most areas, while grade 316 should be used in coastal areas. But stainless steel fasteners can cost five to 10 times more than similar galvanized fasteners.
Can you use stainless steel screws in treated pine?
All bolts, screws, nails plus brackets, framing anchors and other hardware in contact with preservative treated pine should be hot dipped galvanised, monel, silicone bronze or stainless steel. Electroplated fasteners are not suitable due to early break down of the plating.
Can you use composite deck screws on Cedar?
Not really. For wood decks (pressure treated and cedar) it depends on whether or not you choose to screw or nail the decking down. If a fastener line is marketed for use with composite decks it will also be available in different colors.
What screws to use for outdoor decking?
Galvanized screws work well with pressure-treated decking, while Redwood or Western Red Cedar decks are usually built with stainless steel screws to prevent staining around the screw heads.
What screws to use for deck boards?
An 8 gauge, 2.5” coated deck screw is most commonly used when fastening deck boards to joists. For deck framing, structural wood screws such as Simpson SDS 1.5” screws work with joist and stringer hangers, as well as post/beam brackets.
Can you use regular nails in pressure treated wood?
The first rule is: Never use common or bright finished nails. For most applications, however, best nails for pressure treated lumber are either hot dipped galvanized nails and bolts. For screws we recommend using ones that have a protective coating that is designed for use with pressure treated lumber.
Are zinc plated screws good for outdoor use?
Never ever use plated zinc products outdoors. While it is coated in zinc, it simply is not coated in the same method that HDG is. Don’t even try it. That stuff is going to rust so quick.
Why can’t you use coated nails in treated lumber?
While sinkers’ vinyl coating allows them to drive or “sink” into framing materials quickly, it doesn’t provide significant protection from corrosion. Thus, the copper-based preservatives in treated lumber often cause vinyl-coated steel sinkers to corrode prematurely.
Can you use zinc and yellow passivated screws outside?
The application of a passivation layer to the zinc-plated surface of a screw results (depending on the chemical process used) in a yellowish or transparent colouration of the metal. SPAX with a zinc-plated finish are for indoor use. They should not be used outdoors or in damp locations.
Will zinc plated screws rust outside?
Both galvanization and zinc-plating offer a high level of protection against corrosion. Whether a screw is galvanized or zinc-plated, it will feature a zinc shell. And because the zinc covers the screw’s entire exterior, the actual metal from which the screw is made won’t be exposed to moisture or oxygen.
Is zinc good for outdoor use?
Zinc plating is rarely sufficient for exposed outdoor use, especially in a marine environment. For underwater use forget it. No other corrosion resistant coating will be as inexpensive as zinc plating though.
What happens to screws in treated lumber?
However, ACQ treated lumber is more corrosive to metal, so the right fastener is key to a safe, long lasting deck, fence or other outdoor project. This reaction accelerates the corrosion rate of the fastener. Additionally, the organic components of ACQ attract water, further increasing corrosion on the fastener.
Does pressure treated wood corrode stainless steel?
The two most popular chemicals for wood pressure treatment are alkaline copper quaternary (ACQ) and copper azole (CA), which are both active corrosion materials. Only two corrosion protection systems are recommended for use with these pressure treatment chemicals: hot-dip galvanized steel and stainless steel.
Can stainless steel screws be used outside?
Stainless steel decking screws are another great option when it comes to outdoors screws and nails, as well as stainless steel screws. Both have properties that make them weather resistant, and are especially hardy against rain.
Does pressure treated wood corrode steel?
ACQ treated lumber is reportedly more corrosive to steel and coated steel than CCA treated lumber 3. This has raised concerns regarding the corrosion of Structural Galvanized Steel Sheets typically used in bracketry or similar hardware, Architectural Steel Sheets used in roofing and siding product, and fasteners.
