Table of Contents
EVERY toilet tank lid is unique and there isn’t any other in the world exactly the same because porcelain tank lids shrink a lot and all warp slightly while being fired in a kiln at high temperatures. For the most common toilet tank lids we do charge less than most.
Are toilet tank covers standard size?
This toilet tank cover is a replacement part with a size of 21-3/16-inches x 7-7/8-inches. It is designed to fit most standard-sized toilet tanks and it is adjustable.
Can you replace a toilet tank lid?
A broken toilet tank lid is an eyesore and should be replaced as soon as possible. Covering up the inner workings of the toilet tank is paramount. No matter what you need, you can fix your toilet with the help of a new tank lid replacement.
Are all toilet tanks the same size?
Toilet tank sizes vary depending on the type of toilet you have. Toilets come with one of three flushing systems; dual flush, gravity, and pressure-assisted. Generally, toilet tank sizes are universal within these flushing system categories, unless you have a custom toilet.
What is the standard size of a toilet tank?
Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.
Can you buy just the tank for a toilet?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.
Where is the toilet model number?
Toilet model numbers are located in a variety of places on the product. One-piece toilet: The model number is located inside the tank. Two-piece toilet: Model numbers are found inside the tank and the bowl, and are specific for those parts of the toilet.
Why are toilet tank lids so heavy?
It would seem that the actual reason for a heavy tank lid is noise abatement. The more mass, the less noise. The same reason that cast iron pipe is preferred to light weight PVC pipe. Jun 12, 2020.
How much does a toilet seat cost?
Install a toilet seat: national average cost cost to install a toilet seat National Avg. Materials Cost per seat $47.78 National Avg. Cost (labor and materials) for 1 seat $133.78 National Cost Range (labor and materials) for 1 seat $106.05 – $161.52.
What do you call the top part of the toilet?
Tank Lid – It’s the top most part of your toilet tank and covers the mechanisms inside your tank. Bowl – The bowl is the lower half of the toilet used to hold liquid and solid wastes prior to flushing.
Are toilet lids universal?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
How do I measure for a replacement toilet tank?
A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.
Can you mix and match toilet bowls and tanks?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
What is the narrowest toilet?
Above: The Galba Small Toilet is the smallest on our list (it’s said to be the smallest gravity flush floor-mount toilet available) with a 24.5-inch length; $519.95 on Amazon. Above: The Toto Drake Round 2-Piece Toilet is the longest model on our list (28.5 inches) and has a round seat; $288.65 on Amazon.
How do I know what size flush valve I need?
Look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
What is the smallest toilet size?
Compare with similar items This item GALBA Small Toilet 24.5″ Long X 13.5″ Wide X 28.5″ High Inch 1-Piece 24″ 25″ Short Compact Bathroom Tiny Mini Commode Water Closet Dual Flush Shortest Projection Elongated Concealed Trapway Price $51995 Sold By TinyBathrooms Item Dimensions 24.5 x 14 x 27 inches Item Shape Elongated.
How much space is required in front of and beside a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How do I install a new toilet tank?
How to Replace the Tank on Your Toilet Step 1: Disconnect the Toilet from the Water Supply. Step 2: Drain the Water from the Toilet Tank. Step 3: Disconnect the Supply Hose on the Toilet Tank. Step 4: Extract the Bolts on the Toilet Tank. Step 5: Detach the Tank from the Toilet Bowl.
How much is a new toilet?
The cost of a new toilet ranges from $90 to $1,500 or more, depending on the brand and type of toilet you choose, as well as the extra features you want.Cost of Toilet by Type. Type of Toilet Average Cost* Typical Range Wall Mounted Toilet Installation $675 $150 – $1,200 Dual Flush Toilet $350 $200 – $500.
Can cracked toilet tank be repaired?
If you see hairline cracks on the top of the tank, these are cosmetic and do not require repair. Any hairline cracks below the waterline will require a bit of patching with epoxy. Larger cracks below the water line means the toilet needs to be replaced entirely.
How do I know what toilet I have?
The number: Look under the water tank lid (on the bottom), or on the inside walls of the tank. * The number on the lid may or may not be the same as the in the tank or the number of the complete toilet model.
How long do toilets usually last?
Toilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
How do I know what model my American Standard toilet is?
Where can I find the model number of my toilet? Carefully remove your tank lid, and place it gently on the floor. You’ll notice a four-digit number located on the back of the tank, near the water level mark. This is your tank model number.
Are toilet tank covers standard size?
This toilet tank cover is a replacement part with a size of 21-3/16-inches x 7-7/8-inches. It is designed to fit most standard-sized toilet tanks and it is adjustable.
Can you replace a toilet tank lid?
A broken toilet tank lid is an eyesore and should be replaced as soon as possible. Covering up the inner workings of the toilet tank is paramount. No matter what you need, you can fix your toilet with the help of a new tank lid replacement.
Do all tanks fit all toilets?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.
What is the standard size of a toilet tank?
Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.
Can you buy just the tank for a toilet?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.
Where is the toilet model number?
Toilet model numbers are located in a variety of places on the product. One-piece toilet: The model number is located inside the tank. Two-piece toilet: Model numbers are found inside the tank and the bowl, and are specific for those parts of the toilet.
Why are toilet tank lids so heavy?
It would seem that the actual reason for a heavy tank lid is noise abatement. The more mass, the less noise. The same reason that cast iron pipe is preferred to light weight PVC pipe. Jun 12, 2020.
How much does a toilet seat cost?
Install a toilet seat: national average cost cost to install a toilet seat National Avg. Materials Cost per seat $47.78 National Avg. Cost (labor and materials) for 1 seat $133.78 National Cost Range (labor and materials) for 1 seat $106.05 – $161.52.
What do you call the top part of the toilet?
Tank Lid – It’s the top most part of your toilet tank and covers the mechanisms inside your tank. Bowl – The bowl is the lower half of the toilet used to hold liquid and solid wastes prior to flushing.
Are toilet lids universal?
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
Can I mix and match toilet bowls and tanks?
When They Are Interchangeable If the layout for the tank-to-bowl bolt holes and the spud gasket positioning match between the replacement tank or bowl and the old tank or bowl, the two parts will connect properly.
How do I measure for a replacement toilet tank?
A toilet tank’s height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.
How do I choose a toilet tank?
Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.
How do I know what size flush valve I need?
Look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
What is the smallest toilet size?
Compare with similar items This item GALBA Small Toilet 24.5″ Long X 13.5″ Wide X 28.5″ High Inch 1-Piece 24″ 25″ Short Compact Bathroom Tiny Mini Commode Water Closet Dual Flush Shortest Projection Elongated Concealed Trapway Price $51995 Sold By TinyBathrooms Item Dimensions 24.5 x 14 x 27 inches Item Shape Elongated.
How much space is required in front of and beside a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How do I install a new toilet tank?
How to Replace the Tank on Your Toilet Step 1: Disconnect the Toilet from the Water Supply. Step 2: Drain the Water from the Toilet Tank. Step 3: Disconnect the Supply Hose on the Toilet Tank. Step 4: Extract the Bolts on the Toilet Tank. Step 5: Detach the Tank from the Toilet Bowl.
How much is a new toilet?
The cost of a new toilet ranges from $90 to $1,500 or more, depending on the brand and type of toilet you choose, as well as the extra features you want.Cost of Toilet by Type. Type of Toilet Average Cost* Typical Range Wall Mounted Toilet Installation $675 $150 – $1,200 Dual Flush Toilet $350 $200 – $500.
Can cracked toilet tank be repaired?
If you see hairline cracks on the top of the tank, these are cosmetic and do not require repair. Any hairline cracks below the waterline will require a bit of patching with epoxy. Larger cracks below the water line means the toilet needs to be replaced entirely.
