Table of Contents
Q. How much will a plumber charge to install a toilet? Toilet installation costs range from $224 to $531, with the national average at $372. Plumbers can charge anywhere from $65 to $250 per hour for labor costs.
How much does it cost for a plumber to install a toilet?
On average, it will cost around $80 per hour for a plumber to install the toilet. Additional costs may be introduced during the process, for instance replacing old parts or problems which arise.
How long does it take a professional to install a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.
Can I install a toilet myself?
All you need are a few hours, a helper and the right tools and toilet parts for the job. Before you begin learning how to install a toilet, choose your new toilet, and if you aren’t replacing an existing toilet, make sure you have plumbing ready for the new installation.
Do you have to be a plumber to install a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
How difficult is replacing a toilet?
Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Choose a new toilet carefully. Ask the dealer whether existing plumbing will have to be modified, which is a job for a licensed plumber.
Is it safe to leave a toilet off overnight?
Yes, absolutely, fumes can be harmful when replacing a toilet, but they can be kept at a minimum and shouldn’t pose a health risk if you work reasonably quickly and keep the drainpipe covered between removal and installation.
How do I know when I need a new toilet?
8 Signs Your Toilet Needs to Be Replaced Constant Clogging. Nobody likes to deal with a clogged toilet. Cracks. When you notice puddles of water around your toilet, you may want to check for cracks in the porcelain. Plentiful Repairs. Excessive Age. Wobbling. Inefficient Flushing. Surface Damages. Built-Up Mineral Deposits.
Should you tile under a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet.
Do all toilets fit the same?
Most toilets will have a 12 inch rough-in. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in. A toilet with a larger rough-in measurement will require you to change your plumbing configuration or move the wall to get the toilet to fit.
Is it easy to fit a new toilet?
Installing a toilet requires very little tools and with modern pans you’ll find that it’s easier than ever. We have listed below the tools you will need to install a toilet, as well as some extras that may come in handy.
How often should you change your toilet?
Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan. Some would argue that the porcelain toilet itself has a much longer, and even unlimited, lifespan and that it’s only the components inside that need repairs and replacements.
What is the average cost to replace a toilet?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
How long do toilets typically last?
Toilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
Will an elongated toilet replace a round toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
Are most toilets universal?
As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls don’t project out as much as elongated, and then there are variations within the round and elongated categories as well.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Can a handyman replace a toilet?
Minor plumbing If you are in desperate need of stopping a constantly flushing toilet or leaks, a handyman can take care of this for you. If the plumbing issue is more complex than a leak or you need a toilet repaired, that’s when it’s time to call in the professional plumber.
Are old toilets better than new ones?
The biggest difference between older toilets and the models available today is the amount of water they use. Toilets manufactured after 1992 need less than half as much water per use as many older units, while providing a better flush and new convenience features.
Should I upgrade my toilet?
According to the Energy Policy Act of 1992, toilets installed after 1994 must have a flush volume of 1.6 gallons per flush. Toilets manufactured before this policy went into effect used between 3.5 to 5 gallons. The bottom line on aging toilets? If you know your toilet is at least 25 years old, consider replacing it.
How often should toilet wax ring be replaced?
It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced.
Can toilets go bad?
Do you know how old your toilet is? Although some plumbers would say a toilet could last up to 50 years, a federal law actually states that any toilets built before 1994 that holds more than 1.6 gallons per flush must get replaced.
What is a good toilet to buy?
8 Best Toilets for the Home in 2021 Best Overall Toilet: Kohler Corbelle K-3814-0. Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet. Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet. Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
How much does it cost for a plumber to install a toilet?
On average, it will cost around $80 per hour for a plumber to install the toilet. Additional costs may be introduced during the process, for instance replacing old parts or problems which arise.
How long does it take a professional to install a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.
Can I install a toilet myself?
All you need are a few hours, a helper and the right tools and toilet parts for the job. Before you begin learning how to install a toilet, choose your new toilet, and if you aren’t replacing an existing toilet, make sure you have plumbing ready for the new installation.
Do you have to be a plumber to install a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
Is it safe to leave a toilet off overnight?
Yes, absolutely, fumes can be harmful when replacing a toilet, but they can be kept at a minimum and shouldn’t pose a health risk if you work reasonably quickly and keep the drainpipe covered between removal and installation.
How easy is it to fit a new toilet?
It’s not too difficult to replace your old toilet, as long as you can connect it to an existing branch of the soil pipe. But if you want to add a new toilet in another part of your home, you should get a professional plumber to connect into the main soil pipe.
When should you replace a toilet?
Do you know how old your toilet is? Although some plumbers would say a toilet could last up to 50 years, a federal law actually states that any toilets built before 1994 that holds more than 1.6 gallons per flush must get replaced.
How difficult is replacing a toilet?
Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Choose a new toilet carefully. Ask the dealer whether existing plumbing will have to be modified, which is a job for a licensed plumber.
What is a good toilet to buy?
8 Best Toilets for the Home in 2021 Best Overall Toilet: Kohler Corbelle K-3814-0. Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet. Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet. Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
Do new toilets come with wax ring?
Toilets usually include a wax ring. However, it’s best to purchase a backup wax ring in case of damage during installation. You can also use a wax-free ring. These types of rings fix on the flange, rather than the toilet outlet.
Can I do plumbing myself?
While it can be tempting to fix a few plumbing jobs around your house, plumbing is a licensed trade. Only those with a license should be conducting plumbing work. With that said, there are plumbing jobs which you can do yourself. These minor repairs won’t land you in hot water.
Can sewer gas explode?
Sewer gas diffuses and mixes with indoor air, and will be most concentrated where it is entering the home. It can accumulate in basements. Explosion and fire. Methane and hydrogen sulfide are flammable and highly explosive.
Can toilet fumes make you sick?
Hydrogen sulfide gas is also known as “sewer gas” because it is often produced by the breakdown of waste material. However, at higher levels, your nose can become overwhelmed by the gas and you cannot smell it. At higher levels, hydrogen sulfide gas can make you sick and could be fatal.
Does sewer gas rise or sink?
Many of the components of sewer gas are heavier than air and tend to settle/accumulate in basements or the lower level of structures. The methane component is less dense than air and tends to rise in structures.
Do you silicone around a toilet?
Caulk keeps the toilet secure Think again! Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?.
Should you screw a toilet to the floor?
Your toilet should be fixed to the floor using several bolts. Carefully unscrew the nuts and washers to help free the toilet. Your toilet may also have silicone around the base to make it more secure. Use a screwdriver to pick these off to expose the bolts.
Can a handyman replace a toilet?
Minor plumbing If you are in desperate need of stopping a constantly flushing toilet or leaks, a handyman can take care of this for you. If the plumbing issue is more complex than a leak or you need a toilet repaired, that’s when it’s time to call in the professional plumber.
What does a new toilet cost?
Cost of Toilet by Type Type of Toilet Average Cost* Typical Range Low Flow Toilet $510 $380 – $620 Upflush Toilet $950 $600 – $1,300 Wall Mounted Toilet Installation $675 $150 – $1,200 Dual Flush Toilet $350 $200 – $500.
Are old toilets better than new ones?
The biggest difference between older toilets and the models available today is the amount of water they use. Toilets manufactured after 1992 need less than half as much water per use as many older units, while providing a better flush and new convenience features.
Should you tile under a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet.
Do all toilets fit the same?
Most toilets will have a 12 inch rough-in. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in. A toilet with a larger rough-in measurement will require you to change your plumbing configuration or move the wall to get the toilet to fit.
