Table of Contents
Toilet Rough-In Measurements and Standards This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
How do you measure a toilet rough in?
Measuring is done with the old toilet still in place. Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. If your existing toilet has four bolts, measure to the center of the back bolts. This measurement is known as the rough-in measurement.
What is the difference between a 10 and 12 rough in toilet?
When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
What is the difference between a 12 and 14 rough in toilet?
While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. So if you’re looking to install 14-inch rough-in toilets, then you’ve come to the right place.
Can you replace a 14-inch rough in toilet with a 12-inch rough in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall.
What is the smallest toilet you can get?
Tiny Bathrooms Julius Compact Toilet. The Julius toilet from Tiny Bathrooms is one of the smallest standard-plumbed toilets on our list. It has a depth of just 24 inches, is 14.25 inches wide, and stands 27 inches tall. If you don’t want the noise of a macerator, it’s about the most compact loo out there.
How far from the wall should a toilet rough-in Be?
The general rule of thumb for clearance from the wall that faces the bowl is 24″ and just about 15″ on each side. The rough-in measurement indicates how much clearance you have and will allow you to select a compatible toilet.
What does a 10 rough in toilet mean?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
Can you replace a 10-inch rough in toilet with a 12 inch?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Should a toilet tank touch the wall?
No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary.
Why is my toilet so far from the wall?
When toilet flanges are installed it is typically in the early stages of the project and the standard 12″ measurement is taken from the drywall, rather than the finished tile surface that you are measuring from. That means your flange was set at a distance further from the wall than even the 13″ you measured.
What is the standard height toilet?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.
What is standard rough-in size for toilet?
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.
Is round or elongated toilet better?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
What is a good toilet to buy?
8 Best Toilets for the Home in 2021 Best Overall Toilet: Kohler Corbelle K-3814-0. Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet. Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet. Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
How deep is a round toilet?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
How much should it cost to have a toilet installed?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
How far does a toilet need to be from a shower?
Guidelines for Toilet/Bidet Placement The distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches.
Does Kohler make a 10 inch rough in toilet?
KOHLERHighline Classic Comfort Height 10 in. Rough-In 2-Piece 1.28 GPF Single Flush Elongated Toilet in White.
How do I fill the gap between my toilet and floor?
Apply a thin, even bead of caulk around the base of the toilet to cover the gap along the floor and hide the shims. If necessary, smooth the caulk with your finger, wiping your finger clean frequently with a paper towel or a rag.
Can you move a toilet closer to the wall?
Yes. Yes, the 14 inch Unifit adapter moves the toilet 2 inches close to the wall. It may be possible to adjust further.
What do you do with the space behind the toilet?
Filling The Empty Space Behind The Toilet Hang towels. Install hooks for baskets. Mount an open shelf. Mount multiple shelves. Mount baskets. Mount a storage unit. Create built-in shelving. Add a storage tower.
Do all toilets sit the same distance from the wall?
Standard Toilet Placement The minimum distance between the toilet and a finished wall on either side is 15 inches. This is measured from the toilet’s centerline, not from the outside edge. The plumber determines the actual distance when he sets the toilet flange in the floor.
Are all toilets the same distance from the wall?
Keep in mind you need some space on the sides as well. Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
How do you measure a toilet rough in?
Measuring is done with the old toilet still in place. Start by measuring from the wall behind the toilet to the center of the bolts at the base of the toilet. If your existing toilet has four bolts, measure to the center of the back bolts. This measurement is known as the rough-in measurement.
What is the difference between a 10 and 12 rough in toilet?
When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
What is the difference between a 12 and 14 rough in toilet?
While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. So if you’re looking to install 14-inch rough-in toilets, then you’ve come to the right place.
Can you replace a 14-inch rough in toilet with a 12-inch rough in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall.
What is the smallest toilet you can get?
Tiny Bathrooms Julius Compact Toilet. The Julius toilet from Tiny Bathrooms is one of the smallest standard-plumbed toilets on our list. It has a depth of just 24 inches, is 14.25 inches wide, and stands 27 inches tall. If you don’t want the noise of a macerator, it’s about the most compact loo out there.
How far from the wall should a toilet rough-in Be?
The general rule of thumb for clearance from the wall that faces the bowl is 24″ and just about 15″ on each side. The rough-in measurement indicates how much clearance you have and will allow you to select a compatible toilet.
What does a 10 rough in toilet mean?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
Can you replace a 10-inch rough in toilet with a 12 inch?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Should a toilet tank touch the wall?
No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary.
Why is my toilet so far from the wall?
When toilet flanges are installed it is typically in the early stages of the project and the standard 12″ measurement is taken from the drywall, rather than the finished tile surface that you are measuring from. That means your flange was set at a distance further from the wall than even the 13″ you measured.
What is the standard height toilet?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.
What is standard rough-in size for toilet?
The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.
Is round or elongated toilet better?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
What is a good toilet to buy?
8 Best Toilets for the Home in 2021 Best Overall Toilet: Kohler Corbelle K-3814-0. Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet. Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet. Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
How deep is a round toilet?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
How much should it cost to have a toilet installed?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
How far does a toilet need to be from a shower?
Guidelines for Toilet/Bidet Placement The distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches.
Does Kohler make a 10 inch rough in toilet?
KOHLERHighline Classic Comfort Height 10 in. Rough-In 2-Piece 1.28 GPF Single Flush Elongated Toilet in White.
How do I fill the gap between my toilet and floor?
Apply a thin, even bead of caulk around the base of the toilet to cover the gap along the floor and hide the shims. If necessary, smooth the caulk with your finger, wiping your finger clean frequently with a paper towel or a rag.
Can you move a toilet closer to the wall?
Yes. Yes, the 14 inch Unifit adapter moves the toilet 2 inches close to the wall. It may be possible to adjust further.
