Table of Contents
When you’re finished claying your car, you may need to wash it to remove any lubricant film. If you plan to use a pre-wax cleaner polish, it will remove clay residue so there’s no need to wash. Last but not least, after using clay, seal your freshly cleaned paint with your choice of wax or sealant.
How do you clean a clay bar after use?
Follow these steps: Gently rub the clay bar back and forth across the wet area. Wipe the area with a microfiber towel and use the clay lubricant to remove any clay residue. Continue these steps until you’ve clayed the entire vehicle. Store the clay bar in its original case if possible, or in an airtight plastic bag.
Do you compound after clay bar?
Re: Clay before ultimate compound? Yes the compound will take off what the claybar will, but you dont want that junk in your pads. That is the point of claying, to remove all the dirt junk and contamination so you can have a easier and less stressfull buffing experience.
Can I use soapy water with clay bar?
An alternative to a spray detailing lubricant is good old soapy water. Be sure to rinse your wash mitt thoroughly and use a fresh bucket of soapy water, not what’s left over from washing. After claying one or two body panels, your clay will begin to look dirty. Don’t be alarmed, that’s just the clay doing its job.
What liquid do you use with clay bar?
Q: What can I use to lubricate a clay bar? You can use a specifically formulated lubricant, a quick detailer, or soapy water. All of these will sufficiently lubricate your vehicle so that the clay bar can glide over your vehicle’s surface without damaging it.
Should I polish my car after Claying?
The detailer’s rule of thumb is to always decontaminate the surface with a clay bar before putting on a new coat of wax, or polishing any exterior paintwork.
Does clay bar scratch clearcoat?
Clay bars are not supposed to damage the paint or clear coat finish, the particles that are being removed by the clay bar might remove some of the clear coat (see image below for example) the the damage these particles can do over time is worse than the clear coat being removed – and this valleys will be filled in with Jul 19, 2007.
Should I compound or clay bar?
Compounds are typically more used to level your paint to remove swirls, scratches, etc. Scottwax is right. A clay bar will remove the contaminants that are on top of your paint, chrome or windows etc. However, a compound will work to remove a micro layer of paint to remove any scratches, swirl marks, etc.
Can you clay bar with water?
All clay bars require a lubricant. Some can be used with water, some work better with a quick detailer spray (liquid suspension of carnauba).
How often should you clay bar your car?
Although there’s no specific schedule to clay bar your car, you must do this at least 2 to 3 times a year. How often you clean your car will determine the grade you use. To be on the safer side, try being more conservative with the grades, especially when you’re not entirely sure.
What can I use instead of a clay bar?
There are different styles when it comes to clay bar alternatives. Sponges, mitts, towels, blocks, and even discs for your DA Polisher are now available. These can make decontamination much quicker and easier, but you still need to be careful.
Can you use clay bar on glass?
Glass does not need a special clay bar, and most clay bars are safe for glass. They may leave marring on the glass and need to be polished afterwards. With any clay bar, make sure to use the proper clay lubricant. Soaps and water-less washes can often breakdown the clay bars, causing them to crumble and fall apart.
Can I clay bar with car soap?
Car shampoo or soapy water is a decent clay lube and will work just fine for your daily driver. It’s very cheap, super versatile, and offers great lubrication for your clay bar. Professional detailers swear by this product, so definitely give it a try.
Does clay bar remove wax?
Yes. Claying involves gliding along the surface of the car coat and removing any contaminants on the surface. When you clay your vehicle, you remove the contaminants, making the coat easier to wax.
Are clay bars worth it?
Over time, these particles could permanently damage your paint. These particles also prevent wax and polish from working properly, which means you don’t get as clear a shine. If you want to protect your paint job in the future and have your car looks its best, clay bar detailing is absolutely worth it.
Is clay Bar bad for paint?
Clay bars used by professionals will be more “aggressive” in their ability to cut contaminants from auto finishes, but they can also cause damage to paint in the wrong hands.
Can I skip polishing after clay bar?
you could skip polishing after claying and apply your lsp if you use a fine grade clay if it doesn’t marr/scratch (IME it will a little). i would at least do a light polishing step after which may be all that is needed if the paint is in good shape.
Can I wax without polishing?
You can go and wax your vehicle straight away (with some preparations, of course). There’s No Need To Polish Your Car Before Waxing: If the paint still looks great, without damages (swirls, scratches, fading) If you already have the wax on your car and now you want to reapply it.
Can you clay a car without polishing?
Re: Do you clay without polishing afterwards? Yes and no. On my personal truck when i clay i`ll do a quick hand polish to remove any light defects.
Can you reuse clay bar?
Improper Claying “The fact is, clay needs to glide over the surface to be effective in cleaning the paint.” As simple as it sounds, it’s the truth. Jim also strongly advises against reusing clay bars. “Once a clay bar has picked up debris, it’s contaminated,” says Jim adamantly.
Does clay bar increase shine?
Washing and waxing your car is necessary if you wanted to look its best. However, for an outstanding finish, you will need to also apply what is known as clay bar detailing. Through the use of a special clay bar, car owners can make their vehicles really shine and create a flawless finish.
Do you wash car after compound?
Once you apply the compound to the entire body of the car, rinse the car’s exterior with clean water and dry the surface thoroughly.
What is the purpose of using a clay bar?
A clay bar is either a natural or synthetic engineered resin compound designed to remove or ‘lift’ contamination from your vehicles surface to provide a contamination free, smooth surface to apply protection to. Contamination such as: industrial fallout, rail dust, honey due, tree sap and bitumen tar.
