Table of Contents
Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project. When reclaiming clay, wedging ensures all the clay is incorporates together.
What happens if I don’t wedge my clay?
There are usually no air bubbles in it! In fact, improper wedging will more often add bubbles and you’ll just dry out your clay in the process. Simply make sure the pieces get enough drying time and have no plaster mixed in with the clay- that IS a sure recipe for explosions.
What should I wedge my clay on?
Every potter needs a surface to wedge clay on, and there are many different types. The most common are plaster, plaster covered in canvas, and plywood covered in canvas. Other possibilities are concrete, granite, masonite, concrete board and hardibacker board. The simplest wedging surface is a piece of canvas.
Do I need to wedge new clay?
In theory, a new bag of clay does not contain air bubbles. Nevertheless, even if your clay is brand new, it is still a good idea to wedge it. There may be some air pockets present. It is important to remove air bubbles is that they cause your piece to explode in the kiln.
What is a wedged ball of clay?
Wedging clay definition: the process of kneading the clay with the hands to remove air bubbles and ensure a homogenous mass. Wedge the two chunks together and when the clay is no longer marbleized, the clay is sufficiently wedged!.
Can you over wedge clay?
Be careful not to fold your clay over. This will create air pockets. Make sure you’re pushing the clay in and not folding it over. Don’t push your clay down too hard.
What surface does clay not stick to?
Most air dry clays are sticky, and you don’t want that on your work surface. We recommend protecting the work area with items such as wax paper, silicone baking mats, or vinyl placemats. This will keep your table protected and make clean up much easier!Mar 8, 2018.
How do you wedge a large amount of clay?
If you’re throwing large pots, try using softer clay and throw it dry (or with less water) to avoid degenerating it to mush. Wedge using the weight and strength of your whole body on a wedging table of the proper height. Ideally, the table height should be equal to the distance between fingertips and floor (figure 1).
How is clay prepared for pottery?
Processing Clay for Pottery. To use the wet extraction method, start by filling a bucket about 1/3 of the way with soil. Add water and use your hands to break up the soil particles as finely as you can get them. Allow the soil to hydrate for a few minutes, or preferably a few hours.
Can you wedge clay on plastic?
Wedging clay can technically be done on any surface but not all surfaces are created equally. If you were to wedge wet clay on, let’s say a plastic table top, you might just get stuck… You could be scraping clay off the table with a rib (plastic to protect the table please).
Is there a machine that wedges clay?
A Pugmill is a machine with a horizontal chamber that loads on the top. The chamber is a metal cylinder with an auger inside. An auger looks like a large screw. It turns and wedges the clay, discharging the wedged clay at the other end.
What is clay slip made of?
Slip consists of clay particles suspended in water. Its consistency will vary according to use, ranging from thick cream to butter milk. It can be used to bond pieces of clay together, to decorate and protect pottery or it can be poured into a mold and used to cast objects.
How can I reuse old clay?
Reusing Dry Clay Step 1: Get Water! Fill up a bowl of water that will be big enough to store your dry clay into. Step 2: Put Your Dry Clay in It. Place your dry clay into the water. Step 3: PASTE! Step 4: Drain. Step 5: WAIT EVEN LONGER. Step 6: FINALLY.
What are the six stages of clay?
There are 6 essential stages of clay: 1. ) Slip. Slip is clay with added water to make it into a paste or liquid. 2.) Wet clay. Wet clay is used by many potters to produce their work. 3.) Leather-hard clay. 4.) Dry clay. 5.) Bisque. 6.) Glaze ware.
Why is it important to wedge clay?
Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project. When reclaiming clay, wedging ensures all the clay is incorporates together.
What are 5 stages of clay?
Terms in this set (5) slip. a mixture of clay and water, the consistency of pudding. wet/plastic clay. new clay from the bag, very workable. leather hard. the clay has lost most moisture, but you can still carve into it. bone dry or greenware. totally dry clay, all moisture is gone, ready to fire. bisque.
Why do you slip and score clay?
To score a pot or piece of clay means to scratch hatch marks on it as part of joining clay pieces together. This is done before brushing on slurry and joining the pieces together. The process is often called “score and slip.” For example, you may say, “I scored and slipped the pitcher before joining its handle to it.”Nov 13, 2019.
What does it mean to throw clay?
To throw the clay means to bend it between your finger joints. The right finger is lower than the left. This is important since the discrepancy is what forces the clay to bend. As the potter’s hands move upward, the clay is stretched through the bend, with the excess clay being forced upward.
What do you put under clay?
Cover Your Project. Place a damp paper towel over your project and then apply a layer of cling wrap. This keeps your clay from drying out and ready for you to resume when you can. If your project is taking longer than you’d like or something comes up mid creation, you can cover and come back to it when you’re ready.
