Table of Contents
Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water. Each product has its own “feel” during application; however, each product provides protection from water damage and has a coating that resists mildew and UV damage.
What type of sealer is Thompson water Seal?
Clear Multi-Surface Waterproofer. Proven to waterproof wood, concrete and brick. Use as a wood sealer, brick sealer, or for concrete waterproofing.
Is Thompson Concrete Sealer water based?
We’ve always used Thompson’s water sealer on our deck. It’s very easy to apply, you can’t make a mistake using this product and it will make your deck last forever! This time we noticed the product has a white milky color, it’s always been clear. It turns out the product is now water based, no longer solvent based.
Is Thompson’s water Seal latex?
Thompson’s WaterSeal Total All-in-One Stain and Sealer Semi-Transparent | Total All-in-One Semi-Transparent This unique latex & oil blend beautifies and revives the wood’s appearance, while waterproofing with a film-forming barrier. Solid opacity adds he most color and shows the least amount of wood grain.
Is Thompson’s water Seal Multi Surface Waterproofer water based?
Water-Based, Low-VOC, waterproofer & Stain for Decks, Fences & Log Homes.
Is Thompson’s water Seal any good?
– Thompson’s® WaterSeal® Clear did not alter or change the appearance of the wood. After full drying, we tested the ability to repel water. Water did bead on top of the finish and did not absorb into the wood. – As far as we can tell, Thompson’s® WaterSeal® does not prevent UV graying at all.
What’s the best way to apply Thompson’s water Seal?
The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
How long is Thompson’s water Seal good for?
If applied correctly, Water Seal will last up to 4 years.
What is better water based or solvent based concrete sealer?
Water based concrete sealers are usually the best option for DIY projects due to their low odor, VOC content, and ease of application. Solvent based concrete sealers are better for commercial projects and professional use. Both sealer types are excellent at protecting concrete and are easy to apply.
Should I seal concrete after pressure washing?
Yes, sealing your concrete patio or driveway after power washing is a good concrete maintenance practice; as it safeguards the concrete from absorbing water, which then settles in between the holes to freeze and cause cracks.
How often do you need to apply Thompson’s water Seal?
Thompson’s WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.
How many coats does Thompson’s water Seal have?
One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s® WaterSeal® Waterproofing Stains, you can clean your tools with soap and water.
Can I mix stain and Thompson’s water sealer?
As long as it’s all oil based you should be able too. But if it’s a solid color stain it might turn a little transparent if mixed with the sealer..just give it a try on a scrap piece. Bingo. As long as they use the same solvents, it should be fine.
Is Thompson’s water Seal clear or milky?
Thompson’s® WaterSeal® Clear Multi-Surface Waterproofer applies white but dries clear and allows your wood to gray naturally over time.
What chemicals are in Thompson’s water Seal?
Chemical Composition/Ingredients Propane 000074-98-6 200-827-9 Butane 000106-97-8 203-448-7 Solvent naphtha, petroleum, medium aliphatic 064742-88-7 265-191-7 Distillates, petroleum, hydrotreated heavy paraffinic 064742-54-7 265-157-1 Solvent naphtha, petroleum, light aromatic 064742-95-6 265-199-0.
Can you use Thompson water Seal on pressure treated wood?
However, most of the water-repellent sealers sold at home centers, paint stores and lumber yards are suitable for pressure-treated wood as well as other outdoor woods such as cedar and redwood. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.
What is the best sealant for pressure treated wood?
Best Deck Sealers for Pressure-treated Wood Ready Seal 520 Exterior Stain and Sealer for Wood. SEAL-ONCE Nano+Poly Ready Mix Penetrating Wood Sealer. #1 Deck Premium Semi-Transparent Wood Stain for Decks. Thompsons Waterseal Solid Waterproofing Stain. Eco Advance Wood Siloxane Waterproofer Concentrate.
How do you Waterproof untreated wood?
There are three surefire ways to waterproof your wood for years to come. Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish. Seal the wood with coating of polyurethane, varnish, or lacquer. Finish and waterproof wood simultaneously with a stain-sealant combo.
Can you use Thompsons water Seal in the rain?
Thompson’s Water Seal, offers superb weather protection for bricks, mortar, stone & concrete. Its advanced silicone micro emulsion soaks in deep to provide long lasting protection against rain damage.
How do you clean your brushes after using Thompson’s water Seal?
After waiting the recommended time, use a synthetic, stiff bristled brush to scrub the surface. Then use a garden hose or pressure washer to rinse away the residue.
Is it better to seal or stain a deck?
Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage.
What is Thompson’s Water Seal for?
Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.
How long does water based sealer last?
Siliconate Water Repellent Sealers: Like with Silane-Siloxane water repellent sealers, Siliconate sealers will last anywhere from 6 months to 10 years. Most low solids solutions found in store will last 6 monts to a year, while higher solids solutions, like the Armor SC25 will last for up to 7-10 years.
Are water based concrete sealers any good?
Water-based sealers are a good choice when you are looking for a low-VOC, high-performance concrete sealer that is durable and easy to work with, but without the odor and cleanup issues associated with solvent-based sealers.
Is water based sealer waterproof?
No matter what kind of concrete sealer you go with, remember that the proper application is key. They are not completely waterproof or water resistant until they have fully cured, and if they are exposed to water or moisture before curing, this can lead to problems such as bubbling or foaming.
