Table of Contents
Flocculant refers to the chemical or substance added to a suspension to accelerate the rate of flocculation or to strengthen the flocs formed during flocculation.
What chemicals are used in flocculation?
Chemicals (coagulants) are added to the water to bring the nonsettling particles together into larger, heavier masses of solids called floc. Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What do flocculants do?
Flocculants are substances that promote the agglomeration of fine particles present in a solution, creating a floc, which then floats to the surface (flotation) or settles to the bottom (sedimentation). This can then be more easily removed from the liquid.
What is flocculant made out of?
One of the most common flocculants used in water purification today is aluminum sulfate (also known as alum); its chemical composition is shown in Figure 3. Figure 3. The chemical structure of aluminum sulfate (alum). Aluminum sulfate is a white, solid (powder) with a chemical formula of Al2(SO4)3.
What is flocculant in chemistry?
Flocculation, in physical chemistry, separation of solid particles from a liquid to form loose aggregations or soft flakes. These flocculates are easily disrupted, being held together only by a force analogous to the surface tension of a liquid.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is the difference between flocculant and coagulant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
How fast does flocculant work?
Flocculant, although fast-acting, will still need around 8-16 hours to work its magic. It’s easiest to do this overnight. The pump definitely needs to be off as you want the water to be still. The floc will have settled at the bottom of the pool and will require manual vacuuming to remove the debris.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
Can you add too much flocculant?
Too much floc can detract from the beauty of your pool. Flocculants are substances that help clear the cloudiness and restore the clarity to your swimming pool water. You can use too much floc, however.
Is flocculant and clarifier the same thing?
The main difference between the flocculant and pool clarifier is where the clumped particles go. You can also leave the pool filter off overnight while the pool floc goes to work, which is one less thing to do. Flocculant also works much faster than the pool clarifier.
What is an example of a flocculant?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
Can you drink flocculant?
In addition, coagulants and flocculants are expensive, which is why you want to avoid adding more than are necessary to the water; drinking water treatment plants use “jar tests” to identify the optimal coagulant and flocculant concentrations. Do not drink any of your water samples—even if they appear clear.
What is the meaning of a flocculant?
flocculant. / (ˈflɒkjʊlənt) / noun. a substance added to a suspension to enhance aggregation of the suspended particles.
How do you mix flocculant?
To optimize flocculant mixing system sizing, flocculant solutions are often designed to be mixed to 0.25-0.50% maximum concentration. Once dissolved, the flocculants will dilute readily with teed in water down stream of the flocculant feed pump to obtain the final target 0.1% concentration.
How do you pick a flocculant?
How to choose flocculant? the molecular structure:the molecular structure of flocculant depends on the dewatering performance be required. the molecular weight::The choice of molecular weight depends on the types of dewatering equipment, and molecular weight are also said the length of the polymer chain.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
How does alum work as a flocculant?
Alum, is a short term for aluminum sulfate, it works as a flocculant in your commercial pool, meaning that it attracts and traps suspended particles in the water and then sinks them to the bottom of the pool so that these particles can be vacuumed to waste.
Does alum affect pH?
Alum (aluminum sulfate; Al2(SO4)3. 14H2O) is acidic in water and can reduce total alkalinity and pH by neutralizing carbonate and bicarbonate compounds with a greater decline in pH when applied to water with low initial total alkalinity (Boyd 1979a; 1990; Wilkinson 2002).
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
What is flocculant and coagulant?
Coagulation and flocculation are two separate processes, used in succession, to overcome the forces stabilising the suspended particles. While coagulation neutralises the charges on the particles, flocculation enables them to bind together, making them bigger, so that they can be more easily separated from the liquid.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
