Table of Contents
How do you make hot process soap at home?
Basic Hot Process Soap Recipe (aka Crock Pot Soap) 10 oz olive oil. 20 oz coconut oil. 9 oz distilled water. 4.78 oz 100% pure lye. Essential oils for scent (optional).
How long does it take to make hot process soap?
Cooking a batch of hot process soap usually takes between 30-60 minutes. When you make a lye solution, it can reach up to 200°F (93°C), as can oil melted on high in a slow cooker.
How is hot process soap made?
HP is “hot process” soap. The is soap made similar to cold process soap ~ using oil/fat/nut butters, lye and water. The ingredients are brought to trace. The soap is then exposed to heat and “cooked” through the saponification process, usually in a crock pot or double boiler.
Which is better hot or cold process soap?
Unlike cold process soap, that lasts for 4-6 weeks, hot process soap can be used immediately after it hardens. However, by giving it a week or so, the bar can harden up considerably and allow an opportunity for the water to evaporate and will make a harder, longer-lasting bar.
Does hot process soap need a preservative?
When Do I Need a Preservative? When making cold process, hot process, and/or melt and pour soap, you do not need to adding a preservative is not usually necessary, as the water content “disappears” during the saponification process.
Can you make hot process soap on the stove?
Many people like to use an old crock pot, but if you aren’t able to dedicate one to soap making it is okay to use something different. In fact, you can use a stove top and it works just as well. Honestly, your hot process soap will work just fine as long as your soap has a constant heat source.
How much yogurt do you put in hot process soap?
Yogurt – Yogurt helps keep the soap fluid. It has properties similar to sodium lactate. You can use yogurt at 1 teaspoon – 1 tablespoon per pound of oils.
Why is my hot process soap not hardening?
If after 7-14 days the soap is still soft, it is unlikely to harden. Soft, squishy soap can be caused by several factors. One reason may be that not enough lye was used in the recipe. If the soap does not contain enough lye, the oils will not saponify.
How can you speed up the curing process of soap?
Curing Soap Faster: Speed up the process Reduce the humidity. Most people make soap in their homes, or if they are lucky enough, in their workshops. Zeolites. Zeolites are rocks that pull moisture out of the air. Fans. Use less water. Space heater. Good Airflow. Too much lye. Using the oven.
How do I make hot process soap harder?
Here are five things that can yield a harder bar: Use a water reduction. You need to dissolve lye in water in order to turn oils into soap. Add some wax. A small amount of beeswax added to the melted oils will help harden your DIY bar soap. Add sodium lactate. Increase the olive oil. Add some salt.
What can I use instead of lye to make soap?
The main way that you can make soap without handling lye is by using melt-and-pour soap. It’s already been through saponification (oils reacting with lye) and is safe to use and handle straight out of the package. All you do with it is melt it, add your scent, color, and other additives, then pour it into molds.
Why is my cold process soap sweating?
Glycerin in soap attracts the moisture from the air which form on the surface of the soaps – this is so-called soap ‘sweating’. Soap sweating is not an alarming phenomenon, as it is natural for the glycerine to attract moisture from the air. Glycerin is known to be beneficial for the skin.
How long does it take for hot process soap to harden?
Cover the soap and set it aside. It will take 24 to 48 hours to cool down and harden enough to unmold and cut. Since the saponification process is complete, the soap is technically ready to use as soon as you cut it, but like cold process soap, it will benefit from a cure of a few weeks.
What does adding salt to soap do?
Different oils make your soap harder or softer, depending on their fatty acid makeup. However, many soap makers add a bit of salt to their soap to help increase the hardness. In short, the salt will create a harder bar of soap, though it may not be in the way you expect.
Does glycerin act as a preservative?
With a concentration of 50% or more, glycerine replaces the need for any other preservative ingredient. But in this way, it acts as a preservative for plant leaves and food-based ingredients used in many soaps, skincare, and even wound care products.
Is Castile Soap a preservative?
Unlike most liquid soaps, our Liquid Castile Soap Base contains no chemical preservatives, sulfates, or other synthetic additives, making it one of the gentlest liquid soaps available.
Do I need to add a preservative to liquid soap?
Does soap need a preservative? You never have to use preservatives in cold process or melt and pour projects. They have a pH level that doesn’t allow mold or bacteria growth. Liquid soap doesn’t need a preservative either, but you can add one to be extra careful or if you plan to sell it.
