Table of Contents
This airing cupboard, or boiler cupboard, is kept warm by the heat inside the hot water tank, which means it is a popular place to dry damp laundry. Airing cupboards usually include shelves to dry and store towels, bedding and even clothes, which opens up storage space elsewhere in the home.
Can you put shelves in boiler cupboard?
If you make your shelving to slot around a hot water tank or combi boiler, ensure that there is good clearance from your stored goods at all times. This will ensure there is sufficient airflow and will prevent any stored textiles from becoming musty.
Is it safe to put things on top of boiler?
All pipework leading to your boiler should be clipped and fixed to the wall. People have a bad habit of hanging things on the pipes, which could make them pull away from the wall or even leak gas.
What can you do with a boiler cupboard?
If your boiler is in an awkward place such as a spare room or hallway, consider building a cupboard into a neat storage solution. You can configure the cabinetry however you want; with open shelving for books, magazines or records, or make the lower shelves a practical space for storing toys.
Does a boiler cupboard need ventilation?
Although the boiler cupboard may not require any form of air vents or additional ventilation, the boiler requires oxygen in order to burn the gas correctly. The flue is the pipe that allows the waste gases produced by your boiler to be released from your home.
Can you put a combi boiler in a bathroom cupboard?
Can you put a combi boiler in a bathroom? You can put a combi boiler in a bathroom, however, as with any boiler installation, there are certain regulations that must be followed. There must also be sufficient access space around the boiler for maintenance or servicing and for ventilation purposes.
How much space does a boiler need around it?
Make Some Room for the Engineer to Fit Your Boiler We highly advise leaving at least 60cm of space around the boiler and 20cm above and below it. If you know your chosen boiler’s dimensions, measure the area, and then add some extra centimetres as discussed above to make sure there is enough room for the installation.
Where should a boiler flue be placed?
Under the boiler flue position regulations, the flue has to be positioned a certain distance from any parts of the home that can be opened up such as windows and doors. How far this is will depend on the size of your boiler but is typically between 30-60cm above, below or to the side of an opening.
Do gas boilers have to be in a cupboard?
This means that a kitchen cupboard is the perfect thing to house your boiler because it will have a door that can open. As standard, most boilers will require a gap of at least 50 mm between the appliance and the cupboard. These boilers can also go into a small bathroom, an unused airing cupboard or a bedroom wardrobe.
Is it legal to have a boiler in a bedroom?
According to the Health and Safety Executive as laid out in their Gas Safety Regulations 1998, since October 1998, a bedroom, or a room used as a sleeping space, cannot contain a gas fire, gas space heater or a gas water heater (including a gas boiler) that’s over 14 kilowatts unless it is room sealed.
Is it a good idea to put a boiler in the loft?
Moving a boiler to the loft can enable you to hide all that pipework that was previously a bit of an eyesore. This is particularly valuable for those who want a minimalistic house style or for those that want.
How deep does a boiler cupboard need to be?
Available heights include a wall boiler cabinet 724mm high to a dresser boiling cabinet that stands at 1560mm. Their boiler housings can be ordered with a width of either 500 or 600mm and are typically built at a depth of 400mm.
Should a boiler be boxed in?
It is necessary however to make sure of a couple of things when boxing in a boiler: There is at least 50mm of air gap all round the boiler and the boxing allows plenty of ventilation to allow a fresh airflow all round the boiler.
Does a boiler have to be boxed in?
For example, the boiler must be enclosed within a cupboard to ensure that it does not come into contact with any water. Additionally, the boiler cannot be reachable from the bath or shower and the system’s electrical spur must be located outside of the bathroom.
Does a boiler flue have to be straight?
Does a boiler flue have to be straight? Best practice is to install boiler flues that are as short and straight as possible to maximise efficiency. Nevertheless, some boiler models allow for longer boiler flues which sometimes require bends. The number of bends allowed depends on the length of flue allowed.
Can I extend a boiler flue?
Boiler flue extensions are used to extend a boiler’s flue outlet system, effectively an additional flue length of either horizontal or vertical orientation. Flue extensions are brand specific and must be the same brand as the manufacturer of the flue piping system that is being extended.
What fumes come out of a boiler flue?
The boiler flue is essentially the boiler’s chimney, but instead of smoke and soot being channelled away from the inside of the home, it’s mainly carbon dioxide and water vapour that’s emitted.
Is it bad to sleep next to a boiler?
When having the boiler installed, you’ll just need to ensure that the boiler is room sealed, which means that the appliance takes air from outside and any waste fumes are sent back outdoors rather than into the room. This makes it perfectly safe for someone to sleep in the same room.
Can a boiler explode?
While historically, boilers would over-pressurise and explode with alarming regularity, modern boilers are manufactured to be able to withstand excessive pressure, and can typically handle an operating pressure of 20 PSI. When pressures increase beyond this level, the boiler can fail, which can lead to an explosion.
