Table of Contents
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
How far does a wood stove need to be away from a protected wall?
Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall.
How close can a wood burner be to a non combustible wall?
Starting from the ground up, you will need to place your stove on a non-combustible hearth, be it stone or toughened glass, with a minimum thickness of 12mm. In terms of the distance between the stove’s external surfaces and surrounding walls, the minimum to the rear and sides is 150mm.
What is the minimum clearance for a wood stove?
All stoves require a minimum 36-inch clearance to unprotected combustibles above and on all sides of the stove. A single wall stovepipe must have a clearance to combustible walls and ceilings, measured at right angles to the pipe of at least 18 inches. No clearance is needed to noncombustible walls (i.e., concrete).
How do you protect a wall behind a wood stove?
Heat shields are a type of heat-resistant board placed behind a wood-burning stove or other heating appliance. They are necessary for protecting your walls and floors from damage and decreasing the risk of fire.
How close can a wood stove be to cement board?
A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6″ from each side and minimum 16″ from the front face of the stove and minimum 6″ (or the rear clearance to combustibles Oct 1, 2011.
How close can a wood stove be to a heat shield?
Most standards specify one-inch or in some cases 7/8″ of air space behind the heat shield. Some standards specify a 2″ air space.
Can I complain about my Neighbours wood burning stove?
Local Councils are legally obliged to investigate complaints made under the Environmental Protection Act 1990 relating to public health and nuisance issues, which include smoke and fumes from fires or stoves.
How far away should a TV be from a wood stove?
How Far Away Should A TV Be From A Wood Stove? A general rule is that the TV should be no closer than three feet. Don’t allow the TV to be within this distance if it is closer. If the TV is within this distance, it could cause damage to the screen.
Does a wood stove pipe have to go straight up?
The pipe should be as straight and short as possible, with sections properly secured. If it must have angles, limit them to one or, at the most, two sweeping 90-degree elbows or the equivalent. The horizontal portion of the pipe should rise not less than one-quarter inch to the linear foot, to insure a good draft.
How close can a stove pipe be to a wall?
The NFPA calls for an 18″ clearance to combustible walls for single wall stove pipe. Double wall stovepipe is used when you don’t have 18″ or more clearance from combustibles. Most of the double wall stove pipe allows for 6″ clearance from wall combustibles and 8″ from ceiling combustibles.
What can I put on the wall behind my stove?
Granite, stone and other natural or composite materials are also commonly used in backsplashes, whether in tile form or as larger pieces. These higher-end materials will mean an increase in budget, but also a stunning and long-lasting stove backsplash. Stainless steel is another popular option for stove backsplashes.
What kind of board do you put behind a wood stove?
Things You’ll Need Mount a backer board on the walls adjacent to your wood stove. Backer board is a heat shield that is found behind wood-burning stoves. A heat shield is necessary to protect the walls from damages due to constant use of the stove and to protect your home from possible fires.
What is considered a non combustible wall?
Non-combustible materials are building materials that do not burn or ignite when subjected to expected levels of fire or heat. Examples of non-combustible materials include brick masonry, concrete blocks, hardy backer board, calcium silicate board, cement board, metal, and certain types of glass.
Can cement board be used as a heat shield?
Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application. Hardi cement board is also designed to have ceramic, porcelain or stone tiles installed over it to cover and beautify the heat shield after it is installed.
How far should a kitchen stove be from the wall?
There should be two inches of space between the back wall and a drop-in or slide-in (gas or electric) style range. A freestanding range (gas or electric) requires no space between it and the back wall. There should be at least twelve inches between any style range and the closest sidewall.
Do wood burning stoves make your house smell?
A certified wood stove should never smell like smoke [source: EPA]. A stovepipe or chimney that doesn’t draw properly creates a risk of carbon monoxide poisoning — and you can’t smell a carbon monoxide leak. If you don’t have a smoke detector or a carbon monoxide detector in your home, you should install both, pronto.
Can you heat a whole house with a wood stove?
Wood stoves aren’t typically designed to heat an entire house but sized to warm a particular room in a home. However, installing a wood stove in the right location in a home, along with helping to circulate air between rooms, or using a stove boiler, can help to raise temperatures across a whole house.
Are they going to ban wood burners?
The good news is that no, log burners aren’t being banned, but there have been some changes. The strategy came into law in May 2021, so we’ve broken down what it actually says and what’s going to change.
