Table of Contents
The Thompson’s WaterSeal Clear Waterproofer is a multipurpose product that can be used on wood, brick and concrete. The same formula has been around for years without any new or innovative efforts to improve the performance.
Can I use Thompson’s water Seal on concrete?
Provides proven waterproofing protection for all masonry surfaces including pavers, brick, concrete, stone, stucco, clay and quarry tile. Use for concrete waterproofing and as a brick sealer.
What is the best sealer for concrete driveway?
A penetrating silane/siloxane blend is the best type of sealer to use on a new or existing driveway because it is able to repel water, salts, chlorides and some even repel oil and automobile fluids like the Invisible Penetrating Concrete and Masonry Water Repellent Sealer Plus Oil Repellent.
What is a good waterproof sealant for concrete?
When sealing basement floors and foundation walls the best concrete sealers to use are the Lithi-Tek 4500 primer followed by the Siloxa-Tek 8510 waterproofing sealer. If you are going to be installing flooring in the basement, it is best to use a moisture vapor barrier coating like the Vapor-Tek 440.
What sealant can be used on concrete?
Epoxy concrete sealers are the most durable, making them good for sealing garage floors and high-traffic retail environments. Softer acrylic sealers, which require a sacrificial floor wax, are more affordable and popular for residential concrete floors, including basements.
Is Thompsons Water Seal good?
Overall Score Thompson’s® WaterSeal® at 2 Year Period: 6.125 – Overall Thompson’s® WaterSeal® Clear Plus wood finish is a “clear” disappointment. Any finish that offers zero ability to prevent UV graying should not be considered for your deck or exterior wood.
What can I put over Thompsons Water Seal?
You can only paint over Thompson’s Water Seal if you wait 45 days and use a primer. This only works if you paint over concrete, but paint doesn’t always stick to the Thompson’s seal well. Your paint may not look as intended because Thompson’s Water Seal has hydrophobic tendencies.
Is it better to roll or spray concrete sealer?
For large scale applications sprayers are faster and more efficient; whereas paint rollers are less expensive and are more readily available. If you are going to be applying a decorative acrylic sealer or an epoxy floor coating it is best to use a 1/4″ or 3/8 nap roller.
Is driveway sealing worth it?
Kindler said sealing helps prolong the life of a driveway and should be a regular part of home maintenance. “If you seal-coat a driveway or a highway, the surface will last longer,” said Kindler, who teaches a pavement class at Ohio State University. “I would recommend doing it about every three years on a driveway.”Apr 30, 2017.
Should I put sealer on my concrete driveway?
Even for those who live in areas where it never gets below freezing, sealing and coating your concrete driveway will help better protect it from discoloration, staining, and damage from oil, salt, and other household chemicals.
What is the difference between concrete sealer and Waterproofer?
Concrete sealers and waterproofing compounds perform similar functions in different ways. Sealers primarily form protective layers over concrete surfaces, while waterproofing compounds penetrate into surfaces to fill in gaps.
Is concrete sealant waterproof?
QUIKRETE® Concrete & Masonry Waterproofing Sealer (No. 8800-05) is a water-based, highly water resistant, silicone formulation designed to waterproof and seal without changing the surface appearance.
Does concrete sealer keep water out?
But if you expect a concrete sealer to do more than prevent water absorption, then you’ve made a distinction between penetrating water repellants and film forming sealers. As water repellants they can provide long lasting, highly effective protection against freeze/thaw damage and chloride ion absorption.
Can you seal old concrete?
A: Yes! Old concrete can be sealed for the first time or resealed if it has been previously sealed with a concrete sealer. You want to make sure all mold, mildew, efflorescence, rust, grease and oil are removed from the concrete before sealing as you do not want to seal these elements into the concrete.
Is sealing concrete necessary?
You do not have to use a cure and seal, but it is important to seal your concrete. Sealing your concrete will protect it against damage and deterioration against water absorption and surface abrasion. Sealed concrete is more resistant to: Cracking, spalling, and pitting.
Can you paint on top of concrete sealer?
A. You can’t apply paint over an acrylic concrete sealer and expect it to bond for very long. There aren’t any pores in the concrete for the paint to absorb into and stick to the concrete. If it is solvent based (not water based) you can apply it over the solvent based sealer you have already used.
How do I apply Thompson water Seal to my driveway?
Brush or roll the product on a hardened concrete surface as an alternative to spraying. When applying it to a vertical surface, start at the bottom and work upward. When using it as a concrete curing agent, apply it at the rate of 1 gallon per 200 square feet.
What is the best way to apply Thompson’s water Seal?
The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
Does Thompsons water Seal go bad?
If applied correctly, Water Seal will last up to 4 years.
How often use Thompson’s water Seal?
Thompson’s WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.
Do you paint or water seal first?
Things You’ll Need Paint can be applied to water sealers, but the drying time of the sealer itself is the most important part of this task. For best results, prime the water-sealed wood first. Use either a latex-based or an oil-based primer as your first coat of paint before applying the finishing coat.
How do you remove Thompson’s water Seal?
Steps to Remove the Sealant: To use mineral spirits, wipe the spirits over the area with a cloth. Let it sit for a few minutes, then scrub the area with a scrub brush. To use a concentrated degreaser, follow the instructions on the label of your selected product.
