Table of Contents
$9,999 Desktop Waterjet Cutter | WAZER | Order Now | wazer.com.
What does a water jet cutter cost?
Traditional waterjets cost upwards of $100,000 and are too large and messy to fit in most workshops. WAZER costs $7,500.
How much is a CNC water jet machine?
CNC waterjet machines require an expensive Ultra High Pressure Intensifier pump, so they are going to range from at least $100,000 to as much as $350,000, depending on size and options. Finally, CNC laser machines are usually the most costly.
Can a water jet cut anything?
Waterjet machines cut all types of metals: hardened tool steel, aluminum, titanium, and a host of exotic metals that prove difficult to cut with other tools or processes. Cutting with a waterjet produces a smooth edge with no burn marks, cracking or excess burrs.
How many PSI is a water jet cutter?
Typical waterjet cutting pressure is between 50,000 and 60,000 PSI. Many newer systems are pressurized up to 90,000 PSI. The water at this pressure is then released through a small orifice machined into a diamond or saphire, usually in the range of 5 to 15 thousandths of an inch diameter.
Why are water jet cutters so expensive?
Waterjet doesn’t work on its own; you need electricity to power it. This is, therefore, a significant factor that contributes to the cost of using a waterjet. However, unlike water, power requires more money.
How thick can a water jet cutter cut?
Truly, a waterjet can cut up to any thickness, but tolerances will change the thicker the material being cut. Tight accuracies can be kept when cutting materials under 4 inches thick, a near net shape is achieved when cutting thicker materials.
What is better waterjet or laser?
Laser is a bit better for cutting thin metal very precisely and quickly, while water jet excels at cutting a wider range of materials with no heat affected zone.
How fast is a water jet cutter?
In the nozzle, the water is focused into a thin beam by a jewel orifice. This beam of water is ejected from the nozzle, cutting through the material by spraying it with the jet of speed on the order of Mach 3, around 2,500 ft/s (760 m/s).
How much does a metal laser cutter cost?
A metal laser cutter ranges from $8,000 to over $250,000! The bottom-end metal laser cutter can handle very small, low volume projects. But for more standard commercial applications, you need a metal laser cutter that will likely exceed the $20,000 mark. Most companies turn to a metal laser cutting service instead.
What Cannot be cut by waterjet?
Among the very few materials that waterjets cannot cut are diamonds and tempered glass. Some composite materials (layers of different materials sandwiched together) can’t be cut because the water can seep between the layers and “delaminate” the material. Many composite materials cut just fine.
What can water jet not cut?
The water jet is delivered at incredibly high pressure and is mixed with an abrasive garnet. A water jet would not cut through diamond or tempered glass – with tempered glass the material would break as designed to when force is applied.
Can a waterjet cut a diamond?
Since diamond is the hardest material in the world, only the waterjet machine can cut it.” The OMAX 2626 is a high-precision waterjet machine often found in research labs, tech prototyping, and even aerospace facilities.
Can water jet cut skin?
Water blasting injuries can be horrific but can also appear insignificant if only a small puncture happens. However, a small puncture can become severe if medical care is not received. If the water jet cuts through a shoe or sleeve and punctures the skin, it may only appear as a small bruise.
How is a waterjet so powerful?
High-pressure pumps supply the water to the waterjet nozzle. The reason the water stream is powerful is that as it flows out of the waterjet nozzle at very high velocity, the aerodynamic drag acts as a boundary for the stream. This slows down the water and causes it to spread.
Can a water jet cut metal?
Abrasive waterjets are ideally suited for tough and lucrative applications for any metal cutting. More than just common materials of mild steel and aluminum, abrasive waterjets easily cut titanium, Inconel®, brass, and tool steel.
What can lasers cut?
Laser cutting is so popular largely because of its versatility. Laser cutters can cut a wide variety of materials – anything from paper, wood, cork, acrylic and foam to different types of metals.
How does a water jet cutter work?
The mixture of water and abrasive particles passes through a special ceramic mixing tube and the resulting abrasive/water slurry exits the nozzle as a coherent cutting stream of abrasive particles traveling at very high speed.
Can laser cut cut metal?
Lasers can cut through many materials and are typically used on a select few types of metal — in particular, carbon steel, mild steel, stainless steel, steel alloys and aluminum.
Can you waterjet aluminum?
Aluminum waterjet cutting is a highly effective method of processing aluminum, and we are equipped to handle just about any shape or size of alloy. Contact us today to learn more about aluminum waterjet cutting.
How accurate is a water jet cutter?
Accuracy. Flow waterjets can make parts to very tight tolerances, some systems can create parts with a tolerance as close as 0.001″ (0.025 mm). For waterjet cutting, typical part tolerances range from between 0.003″ and 0.005″ of an inch.
