Table of Contents
Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.
How deep should built in shelves be?
Most shelves are built a minimum of 11 to 12 inches deep, but this is your chance to customize: Go for it!.
How shallow can a bookcase be?
Remember, you want to have a little bit of extra space on the shelf so that the book can sit comfortably on the shelf. Likewise, if you own a lot of mass paperback books that do not measure about four inches, you could get your bookcase down to about six inches.
How thick should Wood be for shelves?
Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.
How tall should Built-in bookshelves be?
However, if you’re going to fill the shelves with books, movies, and board games in a basement playroom, you’ll want shelves that are easily accessible. In that case, bookshelves that are 72 to 80 inches tall will make them most functional.
Is it cheaper to build your own shelves?
The pros of DIY shelving include: Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time. Durability – As long as you choose quality materials and a solid design, your DIY shelves will be more durable.
How thick should cabinet shelves be?
Shelves should always be 3/4 in thick. Even expensive cabinets have 3/4 in. Thick particle board veneer with an iron on pre glued front edging to match. This is the industry norm.
How far can a shelf span without support?
Span Limits The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.
How much does it cost to build built in bookcases?
The cost to have built-in bookshelves installed averages $2,744 or between $1,300 and $4,235 for a carpenter to do the job. If you buy the materials yourself, you can usually get a handyman to install them for $30 to $130 per hour. For high end custom work, expect to spend $150 to $1,200 per linear foot.
How much space should be between shelves bookcase?
A good average spacing for shelves is between 8 and 12 inches. If you have oversize books to store, you might prefer to increase the spacing to 15 inches.
What size should bookshelves be?
The standard height of a four-shelf bookcase is 54 inches. The standard height of a four-shelf bookcase is 54 inches. Standard narrow four-shelf bookcases will have a width of 24 inches, and a wide four-shelf bookcase will have a width of 45 inches. The depth may range from 12 inches to 14 5/8 inches.
How much does it cost to build a wood shelf?
The average price for solid custom built-in wood bookshelves is between $500 and $1,000 per linear foot.Custom Wood Bookshelves Cost. Wood Type Price per Linear Foot (Installed) Birch $600 – $900 Maple $700 – $1,000.
How thick should bookshelf be?
How deep should the shelves be? Typically, bookshelves are 11 to 12 inches deep, but if you are building your own bookshelves, this is your opportunity to customize your shelves to fit your books. If you have a lot of oversized books, measure the largest one, and add 1 to 2 inches to the depth.
How thick should floating shelves be in kitchen?
For kitchens, you want to have a depth of at least 10 inches. This is important if you want to store dinner plates or other wider items on your shelving.
How thick is a floating shelf?
The thickness of the wood should be around 2”. This thickness will make your floating shelf sturdy without looking too bulky. Aside from thickness, you also need to consider the type of wood that you are using and to make sure that it’s good for us.
What is the proper height to hang a shelf?
How High Should I Hang My Shelf or Shelves? Like artwork, shelves should be hung at about eye level or about 4 to 5 feet from the floor. If you’re hanging the shelf above furniture, measure about 10 inches from the top of the desk or couch.
How far can a 2×4 span for shelf?
A 2×4 can span a maximum of 6′ 7” when spaced 16” apart and used as a floor or deck joist. When used as a ceiling joist or a roof rafter, a 2×4 can span up to 7′ 3” spaced at 16”, and 6′ 4” when spaced 24” apart. Due to the small spans of 2x4s, they often are not used in horizontal load-bearing capacities.
What are shelf supports called?
A shelf support is a fastener used to hang a shelf on the wall. L-shaped shelf supports are named shelf bracket and they are a subset of angle brackets. Cabinet shelf support, wardrobe shelf support, shelf pin, shelf support peg, shelf support push, plug-in shelf support – when used in a wardrobe or cabinet.
