QA

How To Measure Cushion Size

To measure, remove the pillow cover from insert / filler, turn the cover inside out, lay the cover on a flat surface and measure from the inside seam to seam. If the measurement is taken from the front of the pillow cover side to side, the sizing will be smaller than the actual pillow cover size.

How do you measure a cushion cover?

Measure the height of the cushion if you are covering a box cushion. Multiply the width of the cushion by two and the depth of the cushion by two, and add those numbers together to figure out how much fabric you will need to make the sides, front and back of the box cushion. Add 2 inches for seam allowances.

What is the size of cushion?

Traditionally the most common size and shape for a cushion was the square, and this is available in sizes from 30cm x 30cm (12inch x 12inch), 40cm x 40cm (16inch x x16 inch), 45cm x 45cm (18inch x 18inch) and 60cm x 60cm (24inch x 24inch).

How do I measure for replacement couch cushions?

Pull the seat cover and measure it from corner to corner along the seam to get the best fit. Remember to measure both the front and the back of each cover as some cushions’ forms may vary in width front to back. Measure the depth of a cushion, seam to seam as well.

How do I measure fabric for chair cushions?

Measure the length of the top of the chair pad from the front to the back of the chair. Add an additional 1 inch for a 3/8-inch seam allowance on each end. Double that number for the top and bottom of the chair. For example, if the chair length is 20 inches, add 1 inch for the seam allowance and then multiply by two.

How do you measure a seat?

Seat height measures the seat to floor (or footplate) length. It’s measured from behind the patient’s knee to the sole of their foot while seated. It’s important to measure this correctly as up to 19% of someone’s weight is distributed through their feet while sitting.

What size is a normal sofa cushion?

Standard Sofa Cushion Dimensions On a normal three person couch with smaller cushions, cushions are typically 18 inches or 20 inches square. However, larger couches often have cushions that are 24 inches square or larger.

What size should sofa cushions be?

Standard squares (about 18 inches) nest neatly on sofas with typical dimensions. Oversize pillows (24 inches) create a more casual, loungey feel. If you have a modern sofa with a very low back, consider 16 inches.

What size are sofa cushions?

The size of your chair cushion is determined by the width of your chair. Narrower chairs may only need a single 45 x 45cm cushion. On your sofa, place a 60 x 60cm or a 50 x 50cm cushion at the back (in the corner,) and add a lumbar in front.

How much fabric do I need for a 20×20 pillow?

Sizing Up Fabric Needs for Pillow Covers Dimensions (Length by Width) Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching) 16 x 16 inches 1/2 yard 18 x 18 inches 5/8 yard 20 x 20 inches 3/4 yard 30 x 30 inches 1 yard.

How do I calculate how much fabric I need?

Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.

How much fabric do I need for a seat cushion?

Yardage Estimates Upholstered Furniture 2 Cushion Loveseat: 13 yards 4 Cushion Loveseat: 17 yards 2 Cushion Sofa: 16 yards 3 Cushion Sofa: 18 yards 6 Cushion Sofa: 22 yards Ottoman: 3.5 yards Slipper Chair: 14 yards Wing Chair: 10 yards.

How are women’s seats measured?

Measure around the fullest part of your hips AND seat (tailor term for bum). Stand feet hip width apart, making sure your pockets are empty and the tape is level and untwisted. You should just barely feel the tape against your body, do not pull it too tight.

What is nape to waist measurement?

Nape to Waist — Measure from the “knob” at the base of neck (or bottom of jacket collar) to natural waist. Nape to waist length determines where the pleats in the back of the jacket will rest. These pleats should hit at your natural waist or slightly below at the top of the hip bone.

Can I replace the foam in my couch cushions?

The foam inside sofa cushions can be easily replaced. You’ll have to determine the size of foam you need to fill each cushion, then purchase high-density foam designed for use in furniture cushions. If your sofa’s back cushions have zippers, you can easily replace the foam in those, too.

Should sofa cushions be the same size?

Regular sofas measure between 72-89 inches wide. One to three layers of pillows works best on regular sized sofas. One layer will give you a clean no-fuss look, while three layers will allow you to mix textures, colors and patterns. Use the largest size to anchor the ends and layer any smaller pillows in front.

How many pillows do I need for a 3 seat couch?

We recommend using anywhere from 3 to 6 cushions for a 3 seater sofa. Using 3 cushions creates a pared down look, 4 cushions helps to create symmetry, while using 5 and 6 cushions creates a much fuller look with plenty of opportunity to showcase textural and size differences.