Table of Contents
A Robertson screw, also known as a square or Scrulox screw drive, is specified as ANSI Type III Square Center and has a square-shaped socket in the screw head and a square protrusion on the tool. Both the tool and the socket have a slight taper.
What is the difference between a Robertson and a Phillips screwdriver?
Phillips heads have a cross-shaped tool indent. Square indentations are also known as Robertson screw heads and require a special driving tool. A torx head has a six-pointed star tool shape, which requires a torx screwdriver.
Why is it called a Robertson screwdriver?
He was demonstrating a spring-loaded screwdriver when the blade slipped from the screw-slot and badly cut his hand. The incident inspired him, so he decided to invent an improved and safer screw – The Robertson® Drive. P.L Robertson always looked for a better way of doing things and enjoyed working on new innovations.
What are square driver bits used for?
Square driver bits are commonly used for deck screws, though their popularity has been somewhat replaced in recent years with the Torx head screw. Square bits come in #1, #2, and #3.
Why don t Americans use Robertson screws?
Because it sped up production with less chance of product damage, the manufacturing sector loved it, making Robertson’s screw an instant hit. Most historians attribute its lack of popularity in the United States to Henry Ford.
What are the benefits of using a Robertson screws?
It is easier to use a Robertson screwdriver than a Phillips screwdriver one-handed because the tool tends to hold onto the screw, even if it is shaken. However, an annoying side effect of this “advantage” is that screw bits can sometimes get stuck in the screw head.
Why are Robertson screws better?
Robertson, a Canadian, in 1908. It offered a big advantage over the slotted screw head because it was self-centering and not prone to slipping when driven. A new hybrid screw-head design is a square-drive screw that, in a pinch, allows you to use a Phillips driver.
What does a Robertson screwdriver look like?
A Robertson screw, also known as a square screw or Scrulox, is a type of screw with a square-shaped socket in the screw head and a corresponding square protrusion on the tool. Both the tool and socket have a slight taper. The Robertson screw is specified as ANSI Type III Square Center.
Why does Canada use Robertson screws?
Phillips had invented another kind of socket screw and had no such reservations. Although the Robertson screw is most popular in Canada, it is used extensively in boat building because it tends not to slip and damage material, it can be used with one hand, and it is much easier to remove/replace after weathering.
How many sizes of Robertson bits are there?
The green #1 drive bits are 1”, 2” or 4” long and fit screw sizes #5, #6 and #7. The red #2 drive bits are 1”, 2”, 4” or 6” long and fit screw sizes #8, #9 and #10. The black #3 driver bits are 1”, 2”, 4” or 6” long and fit screw sizes #12 and #14.
What are CRV bits?
Abbreviation of CR-V on tools makes referrence to that “Chrome Vanadium which is used for many different types of tools because when heat-treated it has excellent properties such as strength, toughness, and resistance to wear and fatigue” and you are correct that PH2 refers to Phillips Head size number 2.
What does PH2 mean on a drill bit?
PH2 – (Phillips #2) A large Phillips bit. PH0 – (Phillips #0) A medium Phillips bit. PH000 – (Phillips #000) A small Phillips bit. Choose the bit size that fills the screw head entirely. A bit that is too big or too small will not seat properly, and you’ll end up with a stripped screw.
What are the most commonly used screwdriver bits?
Phillips Head Screw Bits The most common type of fastener has got to be the #2 Phillips head bit, but we’ve even seen adaptation here. The name “Phillips” comes from its inventor Henry F. Phillips in the 1930s. These types of screwdrivers have a pointed cross-head tip that matches a self-centering, cross-head screw.
Can you buy Robertson screws in the USA?
While Robertson screws are available in the US and have been for a long time now, unless you were a commercial user of some sort you probably didn’t encounter them.
Are Robertson screws Canadian?
Ever since, the Phillips screw has dominated the U.S. market. Down but not out, Robertson stayed in Milton and made sure that every Canadian homeowner used his screws. Today, the company he started, now called Robertson Inc., keeps its head office in Milton, but the screws are made in Montreal.
Why are flathead screws still used?
The slotted head screw (commonly but incorrectly called a flat head) is the oldest type of screw in use today. Now, they are mostly used for decorative purposes and have less “impact”. Many people think they are used on light switch covers still for this reason.
What screw head is least likely to strip?
Non-slip head (A standard Phillips head has only four.) More contact means better grip, which makes the bit less likely to slip and strip the fastener. Shorter Outlaw screws have two recesses (12 contact points) but the same hexagonal shape.
Which of the following Robertson screwdriver tips is the largest?
Black Robertson drivers work with the largest screws, types 12 and higher, and have a recess range of 4.81 to 4.85 mm.
