Table of Contents
The markings on a standard ruler represent the fractions of an inch. The markings on a ruler from the start to the 1″ mark are: 1⁄16“, 1⁄8“, 3⁄16“, 1⁄4“, 5⁄16“, 3⁄8“, 7⁄16“, 1⁄2“, 9⁄16“, 5⁄8“, 11⁄16“, 3⁄4“, 13⁄16“, 7⁄8“, 15⁄16“, and 1”.
Where is the 3/8 mark on a ruler?
The very first line on the left hand side of the ruler is the 1/16 of an inch mark. Between 0 and 1 inch, there are marks that denote 1/16, 2/16 (or 1/8), 3/16, 4/16 (or 1/4), 5/16, 6/16 (or 3/8), 7/16, 8/16 (or 1/2), 9/16, 10/16 (or 5/8), 11/16, 12/16 (3/4), 13/16, 14/16 (or 7/8), 15/16, 16/16 (or 1) of an inch.
What is 3/8 on a tape measure?
Inch Fraction, Decimal and Millimeter Equivalents Fraction Decimal Millimeters 3 ⁄ 8 ” 0.375 9.525 7 ⁄ 16 ” 0.4375 11.1125 1 ⁄ 2 ” 0.5 12.7 9 ⁄ 16 ” 0.5625 14.2875.
What size is 3/8 inch?
Conversion table inches to mm Dimensions — Inches to Metric Dimensions —Metric to Inches 0.375” 3/8” 4.3 mm 0.438” 7/16” 4.6 mm 0.500” 1/2” 5.0 mm 0.563” 9/16” 6.0 mm.
What is .38 of an inch on a ruler?
Inch/mm equivalents table inch/64 Fractional inch Decimal inch 35 35/64 0.546875 36 9/16 0.5625 37 37/64 0.578125 38 19/32 0.59375.
How do you measure 3/8 of a cup?
3/8 cup = 1/4 cup + 2 tablespoons.
What is 3/8 as a fraction?
6/16 Fraction Equivalent Fractions 3/8 6/16 24/64 5/8 10/16 40/64 7/8 14/16 56/64 1/9 2/18 8/72.
What is half of 3/8 on a tape measure?
Answer: Half of 3/8 is 3/16.
What percentage is 3 8th?
To convert to percentage To convert the fraction to decimal first convert to decimal and then multiply by 100. Therefore, the solution is 37.5%.
How many inches is 3/8 inches?
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch. Inches fractional decimal 3/8 0.375 1/2 0.500 5/8 0.625.
What is 3/8 of an inch in Millimetres?
Conversion table Inches to mm Dimensions — Inches to Metric Decimal Inches Fractional Inches Metric 0.375” 3/8” 9.53 mm 0.438” 7/16” 11.13 mm 0.500” 1/2” 12.70 mm.
What is the closest metric size to 3 8?
Metric / Standard Wrench Conversion Chart Bolt Diameter Metric Standard 3/16″ 10mm 3/8″ 1/4″ 11mm 7/16″ 5/16″ 13mm 1/2″ 3/8″ 14mm 9/16″.
What is 6.7 inches on a ruler?
It is about 1/64th of an inch… the smallest division you can generally get on a divided scale ruler. Here is two inches of a ruler with 1/64th engraved markings. The red arrow shows 1/64th or approx . 016 from the left end .
What is 10 mm on a ruler?
Look at the unmarked lines on a metric ruler. If you look closely, you’ll notice that there are 10 millimeters in a centimeter. The medium-sized line at the halfway point between each numbered centimeter measurement represents half a centimeter, or 5 millimeters.
What is half of 3/8 cup in cups?
3/8 is 3 oz. A cup is 8 oz so 3/8 is 3 oz. If you’re trying to use dry measure, then 3/8 is just under a half (4/8 being a half) and more than a quarter (2/8 being a quarter cup) so your closes bet is 1/3 cup.
How many thirds are in a cup?
Each cup has three thirds, Therefore in 6 cups there will be six times as many thirds.
What is 3/8 of a cup of water?
Water (Liquid) cup ml fl oz 3/8 (0.375) cup 89 ml 3 fl oz 1/2 (0.5) cup 118 ml 4 oz = 1/4 lb 5/8 (0.625) cup 148 ml 5 fl oz.
How much is an inch on your finger?
One inch (2.5 cm) is roughly the measurement from the top knuckle on your thumb to your thumb tip. Measure yours to see how close it is to 1 inch. After all, you should always have a thumb handy for a guide for measuring items under 6 inches (15cm)!Oct 6, 2019.
How many inches is the average thumb?
When a hand is spread wide, the span from the tip of the thumb to the tip of the pinkie is about 9 inches; from the tip of the thumb to the tip of the index finger, around 6 inches.
What can I use if I don’t have a ruler?
How to to Measure Without a Ruler! 1) Dollar Bill. The bill is just shy of being a perfect measure. 2) Credit Card. The average credit card makes a nice sturdy ruler. 3) Quarter. Makes a pretty darn good 1″ measure. 4) Paper! We all remember learning as a kid, a regular sheet of paper measures: 5) Your Thumb.
What is 3/8 as a number?
3/8 as a decimal is 0.375.
What is 3/8 in its simplest form?
Yes, the fraction 38 is in lowest form as there is no whole number by which we can divide the numerator and denominator. 3 is a prime number so the fraction is in what people call its simplest form.
What is the simplified form of 3 8?
Find Out More About The Free Tools on Visual Fractions As you can see, 3/8 cannot be simplified any further, so the result is the same as we started with. Not very exciting, I know, but hopefully you have at least learned why it cannot be simplified any further!.
How do multiply fractions?
The first step when multiplying fractions is to multiply the two numerators. The second step is to multiply the two denominators. Finally, simplify the new fractions. The fractions can also be simplified before multiplying by factoring out common factors in the numerator and denominator.
What is .8125 as a fraction?
13/16 FRACTIONS INCHES MILLIMETERS 13/16 .8125 20.638 53/64 .828125 21.034 27/32 .84375 21.431 55/64 .859375 21.828.
What percent is 3/8 of a rectangle?
Now we can see that our fraction is 37.5/100, which means that 3/8 as a percentage is 37.5%.
What is bigger half inch or 3 8?
0.5 is greater than 0.375 which also means that 1/2 is greater than 3/8.
Is 3/8 and 10mm the same?
It’s the same size. 3/8 is in inch and and its 10mm.
Is 8mm the same as 3 8?
8mm = 5/16 inch. 10mm = just over 3/8 inch.
What is 33mm in standard?
A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.
What’s equivalent to a 36mm socket?
Wrench Size And Conversion Table Inches Millimeters Spanner 1.390 13/16 Wworth; 15/16 BSF 1.417 36mm 36mm 1.418 1 7/16 AF 1.480 7/8 Wworth; 1in BSF.
