Table of Contents
How do you tell what size my skateboard trucks are?
To determine the width of a skateboard truck, you measure the width of the axle (outer width) and the width of the hanger (inner width). The trucks should always fit the width of your Skateboard.
What size trucks fit 8.25 deck?
Size Guide – Skateboard Trucks Skateboard Truck Size Guide Deck Size Hanger Width Ace 7.75 to 8.25″ 137mm / 5.25″ 33 8.25 to 8.75″ 149mm / 6″ 44 8.75 to 9.75″ 160mm / 6.3″ 55.
How do I know what size truck to get?
For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75″ deck matches a 5.0″ truck, an 8.0″ deck matches a 5.25″ truck.
What are 149 trucks?
Independent Skateboard Truck Size Chart Truck Size Axle Width (in) Skateboard Deck Width (in) 149 8.5 8.375 – 8.6 159 8.75 8.6 – 9 169 9.125 9 – 9.5 215 10 9.5 – 10.5.
Are 54mm wheels too big?
54mm is probably the best all rounder if you are looking at skating a big variety of terrain. This size seems to provide most skateboarders with the perfect blend of speed and acceleration. This really is the Goldilocks zone of wheel size choice.
What happens if your trucks are too small?
What Happens When Your Trucks Are Too Narrow. When you’re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.
Are Tensor trucks good?
The Aluminum Construction allows you a more consistent board feel when your throwing it round, with the more traditional weight being easier to pull you through your carves in the bowl. The Tensor Alloys are a quality truck at an awesome price point, perfect for your first custom set up.
Are skateboard trucks sold in pairs?
Trucks are sold in pairs, they allow your skateboard to turn, they’re what you grind on, and are what your wheels and bearings spin on.
What trucks do pro skaters use?
10 Best Skateboard Trucks Independent Trucks Stage 11. Independent trucks very durable skateboard trucks but have a reputation for being heavy. Thunder Trucks. Venture Trucks. Tensor Trucks. Grind King Trucks. Paris Trucks Co.
Do trucks matter on a skateboard?
The trucks should always fit the width of your Skateboard. It’s important that they’re not much wider than the deck because otherwise, the centre of gravity will shift to the side of the deck. This may have an effect on flip tricks and can affect the general boardfeel.
How do I know what size my truck is independent?
The general consensus is to match the axle width as close to your deck width as possible, use the above chart to get the correct size if you don’t already have a personal preference. Good news if you ride a 8.25″ wide deck, Independent now have the perfect size for you, the 144.
What does 99a mean on wheels?
Any wheel in the 78a to 90a range is considered a soft wheel, 90a to 98a is in the middle, 99a+ is referred to as a hard wheel. We recommend choosing hard wheels for skate parks and street skating on ledges, rails, gaps and manual pads. Soft wheels are best for cruising, transportation and longboarding.
What size is a moving truck?
Truck sizes that rental companies recommend Home size Recommended truck size 1-room apartment 10-16 ft. 2-room apartment 12-22 ft. 3-room house 16-22 ft. 5-room house 22-26 ft.
What are 58mm wheels good for?
Wheels between 55-58mm are great for skating slightly rougher terrain or for skating bowls and ramps at a skatepark. Wheels 59mm and larger are usually used for cruiser boards, where you are more focused on riding and not as concerned with doing flip tricks.
What is the best size for skateboard?
We recommend starting with a skateboard deck width that is proportional to your shoe size. If you wear men’s size 6.5 to 9, start out with a deck width of 7.5 to 8.0 inches. If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches.
What wheels does Tony Hawk use?
The 53-56mm wheels are the more common wheel size for beginners or bigger riders skating street, skate parks, bowls and vert ramps. Wheels 56mm and above are more common for skate filmers.Pro Tony Hawk Rat Numbers STF Bones Skateboard Wheels. Price $35.95 Wheel Formula Street Tech Formula Wheel Edge Round Lip Color White Pro Tony Hawk.
Do wider trucks turn better?
If your truck is a bit wider then your ride will be more stable, but your edge pressure will be reduced meaning you need to make a greater of an effort to turn. The opposite is true for a truck that is narrower than the deck: it’s less stable but your turns are more effective.
How loose Should trucks be for beginners?
Your trucks should be loose enough that you don’t need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider’s preference. That being said, they should be tight enough that the kingpin won’t fall out and loose enough that the bushings don’t burst.
What size wheels should I get for a 8.0 deck?
FIND THE RIGHT SIZE SKATE PARTS Deck Size truck Size Wheel Size 8.0 7.75 – 8.25 Axles 50 – 54 mm 8.125 8.0 – 8.25 AXLES 50 – 54 mm 8.25 8.0 – 8.5 axles 52 – 55 mm 8.375 8.25 – 8.5 axles 52 – 55 mm.
Is aluminum good for skateboard?
As opposed to plastic, cast iron or wood? Yeah, aluminum is the best material. Strong, light, affordable, easy to cast and polish.
Are Tensor Trucks good for beginners?
They are some of the lighter weight trucks on the market, and they have a nice all-around geometry. I would say that Tensors are a decent beginner truck. If you are looking to start out and find a complete with Tensors, its a good find for your first setup.
Are aluminum trucks good?
Aluminum is a lighter metal than steel is, according to Consumer Reports. As a result, cars and trucks that are built with a lot of aluminum can save a lot of weight. That said, aluminum is also corrosion-resistant, and in the long run, that can make aluminum tougher than steel.
