Table of Contents
One adult mask requires two (2) 9”x6” pieces tight-weave cotton and two 7” pieces of 1/4 inch elastic. Therefore, one yard of 44” wide fabric yields 12-15 masks. You need 7.5 yards of elastic for 25 masks (14 inches per mask). You can make two sizes: Adult or Child.
What size elastic is best for face masks?
Elastic. Either the cording or the flat will work just fine. 1/4″ is best (smaller, think – it’s going behind your ears).
Is 3mm elastic OK for face masks?
Elastic for fabric, reusable face masks and other Personal Protection Equipment. 3mm and 6mm braided elastic is ideal for face masks, face shields, shoe covers, doctor’s caps, surgical gowns, and garments. It is perfect for creating reusable face masks as a safe-guard against COVID-19.
How thick should the elastic cord be for a face mask?
I found the best type of elastic for face masks is 1/4″ (6mm) braid elastic. Braid elastic has ribs running along the length. When you stretch it, it narrows.
Is flat or round elastic better for masks?
(option 1) Elastic cord – Note that we found the round elastic more comfortable to wear over a longer period of time, but a flat elastic cord will still function if that’s what you have.
How long is the elastic on a face mask?
For an adult size mask, cut 1 fabric rectangle 16″ long and 8.5″ wide. Cut 2 pieces of elastic, each 7″ long.
What can I use instead of elastic for a face mask?
You could sub in hair ties or elastic head bands for regular elastic. Joann Fabric and Craft stores suggests swapping in cord, yarn, ribbon or other stretchy materials. You could also use bias tape. The CDC also says cloth strips, rubber bands, or string could work.
What is the difference between braided and knitted elastic?
Knitted elastic tends to be softer than braided or woven elastic, and it retains its width when stretched. It rolls more than woven elastic, but less than braided elastic. Since this elastic is softer, it’s suitable for light to midweight fabrics, but doesn’t have the grip needed for heavier fabrics.
How do you stop elastic ends from fraying?
How to Stop Elastic From Unraveling Coat the cut ends of the elastic with liquid fabric stabilizer. Overcast the ends of the elastic with a machine zigzag stitch. Prevent fraying when making bands of elastic by overlapping the edges 1/2 inch and sewing a zigzag stitch over the edge of the elastic.
How do you cover elastic with a fabric mask?
How to use one piece of elastic Cut a 25” (for an average sized person) piece of elastic. Use a bodkin or safety pin to run the elastic through both casings on the mask. Tie the elastic loosely. The user can adjust the fit of the elastic by tying and re-tying it to fit. The user would slip the mask over their head,.
What is the best thread to use for masks?
Black and white thread will get you through most projects. Polyester ones are stronger than cotton. The Gutermann brand (Amazon) is well known for having good quality, strong thread that doesn’t lint much. This is what I use 90% of the time.
How do you determine your mask size?
Wearing the correct size mask for your face is essential for effective filtration and prolonged comfort. To find the best fit for your face, measure from the middle of your chin to the bridge of your nose. Then, measure from your left cheekbone to your right cheekbone.
How long should ear loops be on face mask?
a. Head loops preferred to obtain tighter fit; if using elastic, make the band about 23 inches long. b. If making ear loops, make two, each about 8 inches long.
Can fat quarters be used for face masks?
One Fat Quarter of fabric can make three double-layer masks, however if you only have a piece of fabric the size one pattern below you can use it to make a single mask. Be sure to use safe handling procedures with all masks. Be sure that the fabric is positioned as shown, 18″ on the sides, 21″ on the top and bottom.
Can you cut knit elastic lengthwise?
You can cut this knitted elastic any width and any length you want. Cut this 1-¼ Inch wide elastic lengthwise to a width of 1/4” without raveling, fraying or compromising the stretch.
What does knitted elastic look like?
Knit elastic is smooth in appearance. Knit elastic has a smooth appearance and is soft against the skin. Knit elastic does not become more narrow as it stretches and does not lose resiliency when sewn. Knit elastic can be used for many purposes and is best for lightweight and medium-weight fabrics.
What kind of stitch do you use on elastic?
Use the zigzag stitch setting on your sewing machine and sew across the overlapping elastic 2 or 3 times. This will ensure that the ends of the elastic band are well connected. Another option is to sew the ends of the elastic together using a scrap piece of fabric.
Can you cut thick elastic into thinner strips?
You can also cut thicker elastic into thinner strips, but make sure it’s the braided kind or it may unravel.
How do you edge elastic?
Pin your elastic to the wrong side of the edge of the fabric. Using a narrow zigzag stitch, sew along the edge of the fabric through the elastic to secure it. ( Flip the elastic towards the inside again so that the elastic is fully encased by your fabric.
How do you make fabric elastic straps?
Tutorial: How To Cover Elastic With Fabric Step 1: Cut two rectangles into the fabric of the following dimensions: Step 2: Fold the rectangle along the long side, RS together. Step 3: Sew down using 0.75 cm, more than 1/4″ (presser foot width). Step 4: Turn the fabric inside out.
Can you sew two pieces of elastic together?
Yes, you can sew elastic together. Cut the elastic shorter than the requirement, then stretch and sew using zigzag or stretch stitch all along the band. It is possible to sew elastic together by simply overlapping the ends, or by creating a casing on the elastic ends or directly on the wrong/underside of the fabric.
