Table of Contents
How do you rub wax on a surfboard?
Pressing too hard is going to cause the wax to smear. You want to rub the wax up and down the deck soft enough so that it starts to form small, little beads. The beads will offer better traction and grip when you’re eventually up and riding.
Do you need a base coat to wax a surfboard?
APPLY THE BASECOAT WAX Applying the basecoat is the most important step when you wax a surfboard. The top coat of wax is what you feel when you surf but will rub off as you use your surfboard. The basecoat will stay in place and ensure you stay in place while surfing even if the topcoat does rub off a little.
Where does the wax go on a surfboard?
Applying a base coat of surfboard wax ensures you’ll get a primary anti-slippery layer that will last longer than the top basic coat. Some surfers also apply wax on the surfboard rails for extreme duck-diving and late take-offs. Wax should be applied in the working foot zones of the surfboard.
How much wax should I put on my surfboard?
You’ll want to use about twice as much wax on the top coat as you did with the base coat. Once your board is good and covered, you’re officially out of excuses to not be surfing. So get out there!Sep 27, 2019.
Do you wax the top or bottom of a surfboard?
Applying the Basecoat. Apply your basecoat. If you are using a longboard, wax the entire topside of the board from nose to tail and edge to edge. If you are using a shortboard, wax the topside of the board from the front logo to the back edge (about two thirds of the length) and from edge to edge.
What do surfers rub on their boards?
Surfboard wax (also known as surfwax) is a formulation of natural and/or synthetic wax for application to the deck of a surfboard, bodyboard, or skimboard, to keep the surfer from slipping off the board when paddling out or riding a wave. It is also used to increase grip on the paddle of a surf kayak or dragon boat.
Can you surf with just a base coat?
Applying a base is vital to a lasting finish, especially if you’re out on the water regularly or tearing it up with sick tricks. Base coats should last a while and only need to be applied to fresh boards or a board that you’ve totally stripped the wax from.
Can you use warm water wax as base coat?
Before you apply your regular coat of wax, it’s a good idea lay down a light basecoat using a hard, warm-water wax and then put the softer wax on top. This will help form small, sticky bumps and provide maximum traction. Once you’ve got a nice basecoat, it’s time to use your regular temperature-specific wax.
When should I remove the wax from my surfboard?
How often you wax your surfboard is mostly up to the temperature of the water you’re surfing in. The warmer the water, the more will melt and wear off the board while you’re using it. Expect to clean and re-wax your board quarterly as build-up of old, non-sticky wax can prevent new wax from sticking.
Do you wax the rails of a surfboard?
The goal of waxing a surfboard is to create small, sticky bumps on the surface of the board, to create traction on the board. Wax should be applied to within 1-2 inches of the rails (side of the board), and should not be applied to the rails, or bottom of the board.
Do you wax a soft surfboard?
It’s a good idea to give your board a light wax before every session, and a complete wax job overhaul every few months.
What wax do pro surfers use?
Most pro surfers use Mr. Zogs Sex Wax or Sticky Bumps surf wax.
Why do you Dewax a surfboard?
You have a base coat and top coat so that the paint sticks to the wall. And when the base coat on your board is compromised, or when the two layers mix with dirt in the water, they no longer work as effectively as they were designed to do. This is why it is important to remove wax regularly.
Why is my surfboard slippery?
Surf wax comes in Cold, Cool, Warm and Tropical. If the water is too cold, the wax will freeze making the surface very slippery. Choosing the right temperature surf wax will ensure that your surfboard stays under your feet. Choosing the right surf wax depends on the water temperature where you will be surfing.
What kind of wax is used for surfboards?
Base wax is essential for any new board no matter the water temperature you plan on surfing. Base wax, also called base coat, should be used as a primer for any new board. It allows for other waxes to stick to the board better. Base wax is very hard and should only be used on new, cleaned surfboards.
