Table of Contents
Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.
How do I know what bike chain to buy?
How do I choose? Bike chain selection is firstly decided based upon the “speed” of the chain; this is because it determines the width of the chain. An 11 speed chain for example is narrower than a 9 speed chain, as the sprockets on the 11 speed cassette have a narrower spacing between them.
Are bike chains a standard size?
All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.
How do I know what chain size to get?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What size chains do bikes use?
The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.
What is the difference between 1 8 and 3/32 chain?
A 1/8″ chain is the most common chain found on single speeds, and 3/32″ chain is the most common chain found on derailleur equipped bikes. A 1/8″ chain will fit on parts that are either width. 3/32″ chains will only fit on parts designed to work with 3/32″ chains.
What chain should I use for single speed?
If you have a single-speed bike or one with internal gears, the chain type will be 1/8″ in internal width. In this category you will find cruiser bikes, urban bikes, fixies or models with internal gears, among others. If you have a bike with a derailleur, with 2 to 11 sprockets, you will need chains of 3/32″.
How much is a chain for a bicycle?
A bike chain costs anywhere from $10 to $90 depending on the brand, quality, and type of bike you’re buying it for. Basic, cheaper bikes that need a simple chain will be closer to $10. Higher quality chains that are durable and made for top notch road bikes will cost $60 to $90.
Can I use a 8 speed chain on a 7 speed bike?
Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. That is why the reverse is not the case and a 7 speed chain and especially a 6 speed one will not work as well on an 8 speed system.
What is a 3/32 bike chain?
3/32″ (0.094″, 2.30 mm) chain is used on derailer equipped bicycles that have more than 3 cogs at the rear. Even somewhat narrower chain, typically . 090″ or 2.29 mm between the inner plates, is used for derailer-equipped bicycles with 9 or more sprockets at the rear.
What are chain sizes?
Chain standards Size Pitch Maximum Roller Diameter 50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 100 1.250 in (31.75 mm) 0.750 in (19.05 mm).
Are 6 7 8 speed chains the same?
Chains for 6-, 7-, or 8-speed cassettes are generally universally compatible across brands and speeds. That means if a chain says “8-speed Shimano” you can use it in your old 6-speed, too. All you have to do is line up the new chain with the old one and cut it to size.
Which is better 16 or 18 inch necklace?
16″ Necklace: Falls perfectly around the base of the neck like a collar. On a petite woman it hangs more loosely around the neck and falls just at the collarbone. On a plus size women it may sit more like a choker. 18″ Necklace: A common choice for women that sits elegantly on the collarbone.
Will a 12 speed chain work on 11 speed?
Condensed answer: A 12-speed chain can work with an 11-speed cassette. However, it’s recommended to avoid using a Shimano 12-speed chain because it doesn’t play well with 11-speed chainrings.
Are 8 and 9 speed chains the same?
7, 8, and 9 speed chains have the same inner width, but 9 speed chains have thinner outer plates for a thinner overall chain. So while a 9 speed chain works fine on a 7 or 8 speed drivetrain, it will be a weaker chain that tends to “stretch” faster.
How many links should a bike chain have?
A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.
