Table of Contents
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
What should I put under my above ground pool to level?
Concrete is probably the best option since it is usually 100% level and smooth. Also, grass can’t grow through concrete and animals and bugs can’t damage or burrow through it either. Grass or dirt is also another great option, as long as it has been properly leveled and you’ve killed off the grass first.
What do I do if my above ground pool is unlevel?
Severely unlevel pools need to be drained and completely taken down to relevel them. Draining at least half of the water and repositioning your leveling blocks will protect your pool from wall and water level problems. However, if you have issues with your liner, you may want to consider completely draining the pool.
Does an above ground pool have to be perfectly level?
Traditional above ground swimming pools are leveled at their bottom track. The bottom of an above ground pool doesn’t have to be level. Some will “dish out” the bottom of their pool so it is gradually deeper in the very center and that’s cool as it may make it easier to maintain the pool later on.
How do you level the slope of an above ground pool?
Place stakes or sticks at areas that slope or are off-grade. You’ll need to dig away these area in order to create level ground for the pool. Dig away soil instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work.
Should I put pavers under pool legs?
It is best to put a 1ft-by-1ft concrete block paver under each leg of your above ground pool. These blocks can take the pressure and they don’t get mold, insects, or other forms of deterioration issues. By properly supporting the pool legs, you won’t damage the legs over time and have to dig them out to remove later.
How many bags of sand do I need for a 15 foot pool?
How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Amount for Sand Base with FOAM COVE 12′ Round 1.00 0.75 15′ Round 1.50 1.00 18′ Round 2.00 1.50 21′ Round 2.50 2.00.
How do you level a pool once it’s filled?
Drain some water. You are going to be lifting the lower side of the pool, so you need to get rid of some of the weight. Remove blocks. When you installed the pool, you put leveling blocks under the slab. Raise the wall. Replace blocks. Repeat. Fill the hole. Refill the pool.
What happens if your pool isnt level?
The water will press with more force on one section of the pool than the others. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.
Can you put a pool on a sloped yard?
The short answer is yes. By working with professional pool builders and landscapers, you can pursue pool installation even when you’re dealing with a slope. You can use the retaining walls to ensure runoff won’t end up in the pool or even create water features or ledges for sitting and entertaining.
How do I level my ground for a pool without sand?
Pivot the plank around the pool area and level continually until you are pivoting 360 degrees without stopping. Next, you can spread a layer of crushed limestone over the pool area and seal it by wetting, tamping, and leveling it with your base. Now you can add your soil and limestone until it is flush.
What can I use to level my pool?
The best tool to get the job done is a lawn roller, which you can rent easily from most garden centers. Go over the entire base for your pool, and pack it down flat. Then it’s time to bring out your level. Your goal here is to ensure nothing has changed and you’ve still got everything completely flat.
How do you set up an Intex ground pool uneven?
To set up your Intex pool on uneven ground, Start by outlining your pool on the floor. Use a stake and place it at the center of the place then tie a string to it. Measure the string to the radius of the pool and add 1 foot to the measurement.
How do I prepare my above ground pool for a sloped yard?
Dig out the pool site so the soil is level with the lowest spot. Lay a straight board across the site and measure with a carpenter’s level. Do not fill in low spots as the weight of the water will compact the fill dirt, making it low again. Rake the area for final leveling.
Can you put plywood under above ground pool?
Plywood can serve as a level foundation for a swimming pool.
What sand is best for leveling a pool?
Mason Sand, For Your Pool’s Base It is very fine and should not contain any rocks or pebbles. This will create a very smooth bottom and is the most popular method to use when installing an above ground pool.
