Table of Contents
Can you refinish a gun stock?
When refinishing a stock, apply a total of three coats. Let each coat dry and then sand the stock very lightly with extra-fine sandpaper before applying the next layer. Apply Tru-Oil sparingly to the checkering. Professionally restored checkering will help preserve the beauty of the stock.
How much does it cost to refinish a gun stock?
Current Refinishing Pricing for most gunstocks: $385 – 445 for most stocks. The amount depends on variables such as type of wood; ease/difficulty of old finish removal; extent and location of dents, gouges, scratches; coats required, etc.
What is the best finish for gun stocks?
The best finish to put on a gun stock is an oil finish. It is easy to apply, durable and can be used on finished and unfinished wood. Oil finish is also water-proof, prevents UV light from damaging the wood, and can last for several years.
How many coats of Tru-oil are on a gun stock?
I’m very lightly sanding with a fine wet-dry sandpaper between coats. 0000 steel wool between coats,unless its like 600 grt. sandpaper you are useing. 7 to 12 coats is a good starting place.
What is Tru-oil Gunstock finish?
Tru-Oil® Gun Stock Finish has been the professional’s choice for gun stock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age.
What is tru-oil used for?
Tru-Oil is a polymerized oil, which is a fancy term for an oil that has been cooked to cross link the molecules and help it dry faster when exposed to air. The trick to helping that drying process is to apply very thin coats.
What is tru-oil made of?
Tru-Oil is basically linseed, plus other oils, plus mineral spirits, and I’ve been told that all the non-drying elements have been removed from the mixture. The secret to using it, if there is one, is to get the finish in the wood, not on the wood. This is why some people thin it, to make it penetrate better.
How much does it cost to refinish a shotgun stock?
Current Refinishing Pricing for most gunstocks: $250 – 350 for most stocks. Amount depends on variables such as ease/difficulty of old finish removal, extent of dents, gouges, scratches, etc. Remove entire old finish from stock and checkering (if applicable).
What oil is used for gun stock?
Oil is then applied to the stock – my preference is always Boiled Linseed oil – and once again after a few thin coats, this is cut back again with very fine sanding paper to help fill the grain.
What is the difference between Tru oil and tung oil?
The main difference between tru oil and tung oil is that tru oil can give a harder, more varnish-like finish, while tung oil lets you experience the natural feel of the wood.
Is boiled linseed oil good for gun stocks?
Boiled linseed oil is more often used on bare wood and is popular for finishing gun stocks, as the process of heating it decreases its drying time. When hand rubbed into wood, it creates a durable weatherproof seal and the heat produced from the friction of rubbing produces a deep, polished finish.
What can I use to stain a gun stock?
Generally 50/50 stain and water mix works for most situations. 3 Apply Walnut Stain with a clean, lint-free cloth or brush. If darker than desired, sponge wood with clear water. If lighter than desired, add more stain.
What is in tung oil?
Tung oil is made from pressed seeds from the nut of the tung tree. Pure tung oil is considered a drying oil much like linseed, safflower, poppy and soybean oil and is known to have a slightly golden tint.
Is Tru oil a varnish?
Yes, Tru Gun Oil is actually a varnish. A varnish may be applied with more tolerance to temperature and humidity.
Can you put stain over TRU oil?
luckily, Tru-Oil works fine over pretty much any stain you want, whether it’s water-based, alcohol-based or oil-based.
Is Tru oil toxic?
FLAMMABLE LIQUID AND VAPOR. TOXIC TO AQUATIC LIFE WITH LONG LASTING EFFECTS.
Can you put Tru oil over wax?
Depends if you have a clear coat over the tru-oil. Once waxed, if you need to touch up the tru-oil, wax makes it very difficult to apply/adhere properly. If you have a hard final layer other than tru-oil, wax is probably fine.
Can Tru oil be tinted?
I haven’t specifically tried tinting Tru-Oil (because I don’t really use it any more), but from my experience tinting other similar types of finishes, the two products which will probably work best are TransTint and Mixol. Both are considered to be “universal” and are able to be mixed into any type of finish.
What kind of oil is tru oil?
Tru-Oil is Linseed oil based with special driers added and will darken with age. It is a good product and is easy to use. Tung oil does not darken with age. It has been used for centuries to protect wood including boats and sailing ships dating back to the 13th century in China.
Who makes TRU oil?
Birchwood Casey Tru-Oil Gun Stock Finish 3 Oz.
