Table of Contents
Determining Deck Board Spacing When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you’re using decking that’s already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn’t been dried down or kiln dried.
How far apart should deck boards be?
Proper deck board spacing should have a 1/8-inch gap after the decking has dried out. If you install your decking using wet boards, pressure-treated decking that has not yet dried out, then you should install them with no gap as a gap will be created as they dry and shrink. Deck spacing isn’t anything to take lightly.
What is the gap between decking boards UK?
You need an expansion gap of 5-8mm between the boards. If you are going to build your decking next to a house then make sure it’s 150mm below the damp-proof course and that you don’t cover any air bricks. Try to plan your deck to fit only whole boards, to avoid having to awkwardly cut a board lengthways to fill a gap.
Can you put deck boards tight together?
Keep the butt ends as tight as possible when installing wood decking. This rule does NOT apply to composite or PVC boards which can have a large thermal expansion; enough to create a serious roller coaster effect down the length of the PVC or composite boards if you DON’T leave room for thermal expansion.
Do decking boards expand?
Any type of decking board will expand and shrink, whether it’s wood, plastic, or composites. However, they don’t change in size as much as wood or plastic. Wood fibres hold the shape when the composite undergoes thermal expansion, while the plastic fibres do the same when moisture is involved.
What is the correct way to lay decking boards?
What is the correct way to lay decking? Any decking board manufacturer or professional will tell you: “The proper way to install a decking board is ridge side down.” The ridges are designed to allow for airflow, to stop moisture sitting in the ridge, and allow for a stronger structure.
Can I use 4×2 for decking frame?
4 x 2 Timber Rail / Joist. These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.
How much space do you need between decking joists?
For residential decking, the joist space should not exceed 16 inches as measured on the centre. But if you want a more rigid feel for your decking, you can space the joist by 12 inches on the centre. Additionally, for commercial deckings, the standard joist spacing is 12 inches on the centre.
How do you fill space between deck boards?
While you might be tempted to fill in gaps in your decking with wood filler or caulk, the natural movement of the boards can eventually cause the materials to break loose and make the gaps even worse. However, you can use rope to easily fill the gaps.
Should you space 5 4 decking?
For 5/4 pressure treated decking, it should be installed tight and allowed to shrink to provide water drainage. With cedar 5/4 decking installation should be with 1/16″-1/8″ gap (2-3mm), which will expand to 1/8-1/4″ (3-6mm) once the wood has dried. Providing both deckings’ plenty of spacing for drainage.
Is it necessary to space deck boards?
One critical step that can be easily overlooked is the board spacing. Leaving a gap between boards is critical for a well-built deck that will have space to drain, dry, expand and contract without causing the wood any damage.
Should decking be grooved side up?
The correct way to lay decking boards for most decking is smooth-side-up, with the ridges there to prevent rot and mould.
Do you need noggins on decking?
Also know as Noggins’, these short pieces of timber sit horizontally in-between the rafters, the amount you will need depends on the size of the decking, for very small decks only a few will be needed, for larger areas space them 400mm apart and offset them slightly so it’s easier to screw them in from the back of the Jun 9, 2021.
Should deck boards run parallel or perpendicular to house?
Decking running parallel to the house makes the deck look wider and blends the deck into the house. If the decking runs perpendicular, the deck looks long and extending far out, away from the house.
Is 2×4 OK for decking joists?
Yes but you will need to support the 4×2 at their midspan with something to stop any flex, usually posts or beams are used but if you’re tight for space dig a channel out of the ground a bit, tamp some scalpings down and bed preformed 4×3 concrete lintels down level and in line and support the joists off these.
Do you screw decking at every joist?
Each deck board should be fastened with two screws at each point where the board crosses a joist to ensure the stability and durability of your deck’s surface. Boards should be fastened to rim joists with three screws.
What size timber should be used for decking?
The frame The key to constructing a good decking area is the frame. If the decking is being built on a low level it should be built of C16 graded treated joists 45 mm by 95mm (4×2 approx.). However if you are building a raised deck you should use 45mm x 145mm joists.
