Table of Contents
The term ‘postforming’ is used to describe the bending process applied to specially developed grades of laminate which, whilst possessing all the well-known properties of standard grade high pressure laminates, can also be formed into simple cylindrical concave or convex curves.
What is post forming process?
Post forming is basically a process where laminates are applied on a surface such as plywood or MDF (Medium Density Fibreboard). In fact, post forming can be done on any surface that has edges that are specially formed. After this, the laminate can be rolled over the edges.
What is post formed plastic laminate countertop?
In the world of countertops, post-form countertops are pre-manufactured with the laminate already bonded to the particle-board backing. These laminate countertops are available as drop-in-place sections with the laminate material already bonded and shaped around the edges and backsplash.
How thick is post forming laminate?
Grade 20/VGP: Formica brand postforming laminate Grade 20/VGP is intended for application to interior vertical surfaces requiring 3/8″ (9.5mm) or greater outside radiused edges, where design, appearance, quality, durability, resistance to stain, and resistance to heat from ordinary sources are required.
What is a post form counter top?
A “Post Form” countertop is created through a line process with all the forming and cutting being done by machinery. Post form countertops typically have a rolled edge on the front of the counter (seldom a square edge – except for Gold Cup). A customer may not want a backsplash on a post form countertop.
Can Formica be formed?
Formica is a plastic laminate used widely for countertops and cabinet doors. Most tight Formica curves are formed during the manufacturing process since it’s difficult to bend and shape manually.
What is post forming machine?
A postforming process provides the surface and edge of a workpiece with a continuous laminate coating for optimum protection. This technology is ideal for any application involving mechanical, thermal and chemical stress or moisture.
What is a postformed edge?
Definition of “post-formed” worktop When a laminate kitchen worktop is manufactured, a curved edge is formed on the long front edge of the chipboard or MDF (medium density fibreboard) baseboard prior to the laminate being attached. As the laminate sheet is added AFTER the edge is shaped, it is described as POST formed.
What are the grades of laminate?
Laminate is made in many different grades intended for specific uses. For practical purposes we define sheet laminate as either Vertical or Standard Grade. Wilsonart and Formica vertical grade laminate is used in applications where thinner materials are desirable and impact-resistance is not as critical.
What is general purpose laminate?
General Purpose (HGS) Type 107 is most frequently used for work surfaces on counters, islands, vanities, desks and tables. Common applications of post forming laminates are formed edges for counters, desktops, cabinet doors and drawer panels.
What is self edge laminate?
Self -edge laminate is a straight flat edge – http://aplfab.com/laminate/edges/self.html . Yes laminate can be done in most similar profiles like valencia, barcelona edges.
Can you curve laminate?
Making patterns and shapes. Laminate doesn’t only make curved surfaces, it can also make curved edges, as we see in the key decorative elements in Kennedy Nolan’s kitchen – the scalloped doors of the tower cabinetry, and the geometrical pattern in the island benchtop.
How can I hide laminate edges?
You can purchase a separate branded edging product – like IdealEdge®– that adheres to the side of your laminate countertops. Edging products allow you to upgrade from flat edges to a variety of other edge profiles – and they hide the brown lines. Edging treatments are easy for DIY’ers to install.
What is a Formica Postform?
The term ‘postforming’ is used to describe the bending process applied to specially developed grades of laminate which whilst possessing all the well-known properties of standard grade high pressure laminates can also be formed into simple cylindrical concave or convex curves.
What is the process of post forming in particle board furniture?
Postforming is a process where laminates are applied to a plywood/MDF or any other substrate with specifically formed edges, and the laminate can be rolled over the edges to create a single, unbroken laminate face. The postformed edges are not sharp and have a nice rounded finish.
Can you screw into laminate countertop?
Laminate countertops are typically constructed of a pressed-wood material and topped with plastic sheathing. You can use an electric drilled equipped with a common multipurpose bit to drill through laminate countertops. Placing masking tape on the laminate prior to drilling through it will reduce drill bit slippage.
Do I really need build up strips under laminate countertops?
In order to ensure adequate support of your laminate countertop, build-up strips must be installed spanning the entire distance from the front to the back build-down strip on the countertop. On standard face frame cabinets, the end build-up strips must be installed 2″ from the end of the cabinet run.
What does profiled edge mean?
Profiling tends to produce a more hard-wearing edge, with the smoother edge increasing the wood’s resilience against minor knocks and surface impacts. The edge is also less sharp and more tactile, which can be safer in family homes.
What is a chamfered edge worktop?
Chamfered Edge – Chamfered edge worktops use a small bevel to either the top side or the top and bottom sides of the worktop to produce a sleek timeless look and feel that sits comfortably in both contemporary and traditional kitchen designs. The Ogee Bullnose is most popular in natural stone worktops.
Can you curve a bullnose worktop?
Many of our customers ask, “can laminate worktops be curved”, and the answer is yes.
How thick is the average laminate countertop?
Laminate countertops have a standard thickness of an inch and a half, though fabricators can produce various thicknesses. Some homeowners prefer a thicker countertop to mimic stone.
Are all laminate countertops the same?
All plastic laminates used for countertops share the same basic manufacturing process, although there are small proprietary variations between manufacturers.
Is there laminate that looks like granite?
Laminate that Looks Like Granite If you like the look of granite but don’t like the price tag, Wilsonart makes laminate countertops that look like granite. This versatile pattern has a unique blend of gray, chocolate and black veining with a cream backdrop.
What is the meaning of Postform?
Definition of postform : to shape subsequently (as a sheet material after laminating).
How are post form countertops made?
Post form laminate countertops are a man-made material. The process involves adhering a type of laminate that is thinner and more flexible than conventional horizontal laminate to a particle board with formed edges. The post form laminates come in tall sheets that rolled and applied to the substrate without a seam.
What are the different grades of Formica countertops?
Formica® Brand Laminate sheets (horizontal post-forming grade 12/HGP and vertical post-forming grade 20/VGP) are available in a broad selection of designs and colors. Standard finishes for each pattern are detailed in the Formica Corporation – National Product Guide.
