Table of Contents
Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.
How does a LED light dimmer work?
How Dimmable LED Lights Work. In the case of PWM, dimmable LEDs work by creating a dimming effect. Unlike traditional lighting such as incandescent, dimmable LED bulbs don’t rely on voltage to dictate their level of brightness. Instead, they essentially rely on a cycle of being on and off.
What is the difference between a regular dimmer and an LED dimmer?
The main difference is that you have a smaller dimming range (typically 70-90% range vs. 100% with incandescent or halogen). LED Bulbs may not shut off at the lowest dim setting like traditional bulbs. In traditional dimming systems you are simply lowering the voltage/power to the bulb, which in turn dims it down.
How do dimmable LED switches work?
Dimmer switches work by controlling the voltage of a lightbulb. The most simple and common forms of dimmer switches simply reduce the amount of electricity that flows through a circuit, thus reducing the amount of bright light.
Can you put a dimmer on any LED light?
A standard dimmer switch cannot be used with an LED light as you will never be able to dim the LED light either completely or not very well. LED lights need their own special electronic dimmer switch to have a fully functioning and dimming light.
Why do my LED lights flicker on a dimmer switch?
LED bulb flickering can be traced in almost every instance to a non-compatible dimmer switch in the lighting circuit. LED bulbs don’t have glowing filaments. When the dimmer switch goes off and on many times per second, the LED bulb becomes a flickering strobe light.
Why do lights flicker on a dimmer switch?
If bulbs connected to a dimmer are flickering, this is likely the reason why. Loose or poor wiring behind the switch could also cause flickering. Check the ratings for your bulbs and dimmer to be sure they’re compatible. Mismatches here can lead to common fixture problems like buzzing or flickering.
What happens if you use incandescent dimmer on LED?
When connected to current incandescent dimmer controls your LED bulbs, dimming features may not work or if they do work, it may not function the way you wanted. It is best to purchase dimmers that are compatible with your LEDs.
What happens if you dim a non dimmable LED?
So what happens if you use non-dimmable LEDs on a dimmer? Well, at best the bulb just won’t dim properly. But non-dimmable LEDs are only designed to be either fully powered ON or OFF, which means the circuitry inside won’t be able to handle low or pulsing current levels and will eventually become damaged.
Can you use a dimmer switch on any light?
Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. If you install line-voltage track and rail lights with incandescent bulbs, you can use dimmer switches to control their brightness. Just be sure to use a line-voltage dimmer as well.
Can you use an LED dimmer switch with normal bulbs?
The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.
How many LED lights can I put on a dimmer switch?
As an example – if you have a dimmer switch with a maximum rating of 400W (rule of thumb translates to 40W) you can run five 7.1W dimmable LED light bulbs (see example below for further explanation).
Do dimmers save electricity?
Not only do modern light dimmers save you energy, but they also extend the life of your light bulbs! Dimmers use a “Triac Switch” to rapidly turn a light circuit on and off to reduce the energy flowing to a light bulb. This switch will cut the energy running to the fixture up to 120 times in one second.
What kind of dimmer is needed for LED lights?
There are two types of dimmer switch available: leading-edge and trailing-edge dimmers. Some retrofit LED light bulbs and fittings have drivers that allow them to work with either type, but for a better chance of the dimmer operating correctly, choose a trailing-edge dimmer.
Do you need an LED dimmer for LED lights?
A dimmer is required for dimming LED bulbs. In most cases your current dimmer is used to dim halogen and incandescent bulbs. Each dimmer has a minimum power, this power is 40-80W. As a result, the LED bulbs may not dim or only very bad, resulting in flashing.
Why do my LED lights burn out so fast?
Unlike incandescent light bulbs, LEDs don’t produce light using heat. This is part of what makes them so energy efficient. The downside is that their components can be sensitive to overheating, which can cause them to burn out prematurely.
Can flickering lights cause a fire?
Minor changes in your home’s voltage are normal, but flickering lights may indicate abnormal fluctuations. Abrupt changes in voltage from low to high can damage electronics and in rare cases cause an electrical fire.
