How Long Does It Take To Replace Shocks On A Car

Table of Contents

In most cases, it shouldn’t take more than a couple of hours to get back on the road again. If you’re interested in replacing shocks and struts on your vehicle, you’ve come to the right place. In this article, we’re discussing the difference between the two and how to replace them so you can save some money.

How long does it take to change out shocks?

Replacing a single set of shocks, for example takes between 2-3 hours, as does either side’s control arms. Lesser work such as replacing a spring or shock absorber will take less.

Is it easy to replace shocks?

Shocks are pretty straightforward—you usually just have to disconnect the top and lower mount to be able to remove them. However, on certain cars, you may need to remove some paneling to gain access to the shocks.

How much does it cost to replace car shock?

Shock Replacement Cost The average total cost to replace a pair of shocks will run about $250 to $580. An individual shock absorber will cost around $50 to $140 so parts alone will set you back between $100 and $280. A couple hours of labor to do the job is an additional $150 to $300.

Should I replace all 4 shocks at the same time?

Shocks and struts should always be replaced in pairs or, better yet, all four, for even, predictable handling and control. Remember, too, that whenever the struts are replaced, it becomes important to check the alignment, as it may have changed, to protect your vehicle tires and assure maximum safety.

How long do front shocks take to replace?

Should I replace front or rear shocks first?

Just like replacing your brakes or tires, you should replace your shocks in pairs. However, you don’t need to replace the front and rear shocks at the same time. As long as you replace both fronts or both rears at the same time, you’ll be fine.

Will replacing shocks improve ride quality?

A good place to start with suspension is to consider changing out the shocks and/or struts of your car. If it’s been a while since your struts or shocks have been changed or if you can’t remember the last time you got new ones, a new set can greatly improve your ride quality compared to your old, worn-out ones.

How do I know when my shocks are bad?

Other signs of car shocks and struts in bad condition are unusual noises over bumps, excessive body lean or sway in turns, or that the front end of the vehicle dives sharply in hard braking. Bad shocks also can affect steering control and cause uneven tire wear. Carrying heavy loads also will wear out shocks faster.

Are struts and shocks the same thing?

However, shocks and struts are two distinct parts with different functions. While both can help with your vehicle’s ride and handling, these parts work in different ways. Shocks are individual components of the suspension system while struts are a major structural component of the chassis and suspension system.

How much does it cost to replace all 4 shocks?

A typical shock and strut replacement can set you back anywhere between $450 and $1,100 on parts and labor combined. An individual shock and strut assembly costs around $150 to $900, while estimated labor costs for replacing a shock and strut assembly can range anywhere from $150 to $300 per assembly.

Is it safe to drive a car with a broken shock?

Yes. Although it won’t be a comfortable journey. A broken shock absorber will result in your car bouncing around, as well as excessive rolling, squatting and diving. For that reason, you should never drive a car with a broken shock absorber at high speeds and avoid sudden turns and abrupt stops.

Do car’s have both shocks and struts?

First of all, it is important to note that not all vehicles have both shocks and struts. Shocks are part of the overall suspension, and a strut is a complete suspension assembly. The shocks and/or struts in your car perform two functions. They dampen spring oscillation, and secondly, they aid in ride control.

Can you replace just front shocks?

It’s not necessary, but it’s usually recommended to replace them in pairs, for example, both front struts or both rear shocks. If you replace only one shock absorber, it may create “unevenness” from side to side when driving over bumps.

Can you run shocks front and rear?

Yes, you can use two different shocks on your car or truck, as long as you follow a couple simple rules: As long as you have a reason for installing different shocks front and rear you can do so safely. Never Install Used Shocks – You should never install used shocks on your car or truck.

Can you replace shocks with struts?

A shock cannot be used to replace a strut and a strut cannot be used to replace a shock. A vehicle will have either a shock or a strut at each wheel, never both. This is also the reason that struts are typically more expensive than shocks. People often call in saying they have been told they need shocks and struts.

How long does it take to replace all 4 struts?

These assemblies allow you to replace both of your front struts yourself in less than two hours. You’ll have to get an alignment done afterward (about $100), but you’ll still save about $300 by doing the job yourself.

Do you need an alignment after replacing struts?

Strut suspension usually has the shock absorber and the spring in one unit, with the top of the strut mounted very high in the car body and the bottom of the strut attached to the lower control arm. This lowers the vehicle center of gravity, which is a good thing. Replacing those struts requires no alignment.

Can I replace rear shocks only?

Should I replace both rear shocks at the same time?

Yes, you need to replace both shocks at the same time. One new shock can (and will) have an adverse effect on the handling and thus safety. A new shock has different damping characteristics as the old one and it can lead to weird steering behaviour, loss of grip on one wheel, etc.