QA

How To Plan A Lawn Sprinkler System

How do I calculate how many sprinklers I need?

Consider the distance of each sprinkler head. If they distribute water in a circumference of 8 feet around, place them 4 feet apart to ensure every part of the lawn gets watered. Whatever the maximum spray distance of the sprinkler head, divide it in half to find out how far apart to place your sprinklers.

How far apart should lawn sprinklers be?

Types of Sprinkler Heads Because of the lower PSI the distance of the spray rarely exceeds 15ft. Meaning that spray heads should never be placed further than 15 ft. apart as this would create dry spots (i.e. dead grass) in your lawn.

How many sprinkler heads should be on a zone?

At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.

How deep should sprinkler lines be?

Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area’s freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.

How much PSI does a sprinkler need?

Water pressure is measured in pounds per square inch – also called psi. The average water pressure for most homes and businesses is between 30 psi and 50 psi; most sprinkler systems are designed to use pressures of around 30 psi.

What is the minimum distance between sprinkler heads?

The minimum distance a sprinkler can be installed below a ceiling is 1 inch. The maximum spacing between two sprinklers is determined by the rating on the sprinkler head (usually 15 feet, but there are other spacing distances, depending on the manufacturer). The minimum spacing between two sprinklers is 6 feet.

How do I calculate sprinkler flow rate?

Finding the Flow Rate or GPM Equation: 5 (gallons)/number of seconds to fill, then multiply your answer by 60 to get gpm. Example: It takes you 30 seconds to fill a five-gallon bucket; 5/40 = 0.167, 0.167 x 60 = 10 gpm.

How far will a Rainbird 5000 spray?

Rain Bird 5000 Series Rotors are ideal for medium to large-size lawns and evenly distribute water from 25 to 50 feet. 5000 Series Rotors with Rain Curtain Technology are engineered to deliver a uniform spray pattern, giving you superior distribution uniformity and a consistently greener lawn with less water.

How far will a pop up sprinkler spray?

The most basic pop-up sprinkler is a stationary head. Typically spraying one dedicated area up to 15 feet away, these heads produce a fine mist at 90-, 180- or 360- degree angles.

What is the coverage area of a sprinkler?

Sprinkler Head Distance and Spacing Requirements Hazard Level Coverage (in sq ft) per Sprinkler Head Maximum Allowed Distance Between Sprinkler Heads Extra Hazard 1 & 2 (areas with a high concentration of flammable materials) 90-130 sq ft per head (based on obstructions and flow calculationss) 12 ft.

How many zones can a sprinkler valve control?

Can I run more than one zone at a time? For the controllers HC, PROHC, HPC, you can only run a single zone at a time based on the power output available. Running multiple zones at once is usually not possible due water-pressure and flow limitations at residential properties.

What is the best size pipe for a sprinkler system?

From the Water Source Holding the bulk of the water volume, this pipe size should range from 2 to 3 inches in diameter. You need this diameter so the water pressure is not significantly reduced before entering the garden. Choosing the larger 3-inch pipe provides you with some flexibility for future expansion.

How many sprinkler lines do I need?

With your 10 gpm flow rate at your spigot, you could run two sprinklers at 5 gpm each. The best set-up is to run two hoses from the spigot–each to one sprinkler. Suggested sprinklers for this set-up are the Residential Sled Base Sprinklers or the Tripod Sprinklers.

How often should grass be watered?

Most lawns need 1 to 1.5 inches of water per week—either from rain or watering—to soak the soil that deeply. That amount of water can either be applied during a single watering or divided into two waterings during the week. Just be sure not to overwater your lawn.

Where do sprinkler lines run?

Typically a pipe will run from the water supply to the valve box. From the valve box pipes will run out to the various sprinkler heads. Each valve in the valve box represents a single zone. When the sprinklers come on, a valve will open and all the sprinklers in that zone will come on at the same time.

Should irrigation valves be buried?

Valves can be grouped together in manifolds, or installed individually – and valves should always be buried inside a plastic irrigation valve box. Never bury a valve directly in the dirt.

How do you adjust sprinkler pressure?

If the irrigation pressure is high, there are several ways to solve the problem. Install a pressure regulation device for the entire house. Install a pressure regulation device at the irrigation system point of connection. Regulate the pressure at the control valve for each zone. Regulate pressure at the head.

Do sprinklers need pressure regulator?

California implements mandatory irrigation regulations for 2020. At the start of the year, California implemented new irrigation system regulations, which require all new sprinklers to contain pressure regulators that will restrict the water flow to manufacturer-recommended levels of 30 pounds per square inch (psi).