Table of Contents
In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining. Decks that don’t get much sun should be given an extra day to dry out. If after a day or two the wood still looks wet or there are soft spots, give it more time to dry out.
How do I know if my deck is dry enough to stain?
Three Ways to Know Your Deck is Dry Enough to be Stained One way to clear way to check if the deck is dry enough for staining is by using a moisture meter. A second way to test lumber for dryness is put the edge of the wood into a black garbage bag and leave it in the sunlight for an hour or two.
What happens if you stain a deck too soon?
Staining too soon can lead to the stain not being absorbed by the wood and result in a patchy and failed upgrade for your deck. Make sure the wood has dropped all of the excess moisture before trying to apply stain. Test to make sure that water is absorbed by the wood which ensures this drying process is done.
What happens if you stain a deck before it dries?
But consider this, if you do not let the deck dry sufficiently prior to staining, you can actually trap moisture in the wood underneath the new coat of stain. Then the wood is prone to mold and mildew problems, which can lead to rot and decay.
Can you stain a deck in the evening?
The best time to stain your deck is either the spring or the fall. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.
Can you pressure wash and stain a deck in the same day?
DPI Pressure Washing recommends you wait 72 hours following cleaning to stain your deck. Always inspect the wood before staining it. If you see moisture or some swellings still apparent in the fibers, wait another day or two. Remember that staining a wet deck will result in an uneven finish at best.
How long after pressure washing a deck can you stain it?
After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.
Should you power wash deck before staining?
There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.
How long before I can stain pressure treated wood?
How long do you have to wait to stain pressure treated wood? Wait until the wood is completely dry. Depending on climate conditions, pressure-treated wood can take anywhere from a few weeks to a few months.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. Extreme heat or sun can work against you when you are staining your deck.
What temperature should it be to stain a deck?
Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.
Can you use a roller when staining a deck?
You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. PRO TIP: Back brushing your stain will help the stain soak into your deck boards, allowing better, long-lasting results.
How many coats of deck stain should I use?
The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.
Is it better to stain deck in fall or spring?
Because stain requires a dry deck for a secure application, a week of dry fall weather is ideal for staining your deck than in summer or spring humidity. More specifically, the moderate temperatures of early fall are optimal for staining, as the later fall weeks may bring colder days that are too chilly for your stain.
Is it better to sand or power wash a deck?
DO sand your deck before sealing. At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.
Can I stain a wet deck?
It is not recommended to stain a wet deck. You should remove the old stain before pressure washing the decking to ensure the new one has a good surface to stick to. Let the deck dry for at least 48-72 hours before staining. Staining a wet deck will result in an uneven finish.
