QA

Quick Answer: How To Add A Fireplace To An Existing Home

How hard is it to add a fireplace to an existing home?

Modern fireplaces – both wood-burning and gas-fueled – are much easier to install than building a traditional masonry unit. Fireplace inserts are even easier, because they’re pre-built from the factory and require only an opening to fit in to.

How much does it cost to add a fireplace to an existing house?

A masonry fireplace costs an average of $4,900 installed in an existing home with a 12′ chimney.Fireplace Cost. National Average Cost $2,415 Minimum Cost $100 Maximum Cost $5,600 Average Range $1,050 to $3,780.

Can you add a chimney to an existing house?

It is almost always possible to add a fireplace onto an existing home, especially with so many options ranging to include wood-burning masonry and wall-mounted ventless units.

Can you add a fireplace to a house without a chimney?

Yes, it is possible to add a wood burning stove or a fireplace without an existing chimney, but you do need to install a chimney in the process. All wood burning fireplaces have to have a way to allow smoke and dangerous gases to exit your home.

How much does it cost to add a fireplace and chimney?

A fireplace and chimney install costs $2,500 to $11,000, or $6,750 on average. Replacing the cap, liner and other repairs range from $350 to $2,150. Expect to pay up to $1,000 per year for inspection and cleaning services depending on the condition of your chimney and its total number of flues.

Can you add a fireplace to an interior wall?

It’s possible to install a wood-burning fireplace on an interior wall, but it’s usually not advised because wood-burning fireplaces need proper ventilation to draw outside air to feed the fire and get rid of the combustion exhaust.

Can you add a wood-burning fireplace to a house?

If you want to add a wood-burning fireplace, you need space above to get a chimney through the roof. In two-story houses, choices for placing the fireplace might be more limited, but often you can find the 12- to 14-inch space the chimney requires by enclosing a corner of a room or a spare closet.

What is the fireplace at home called?

The part of the fireplace that holds the fire is called a firebox or a firepit. There is a chimney or flue above the firebox that lets the smoke from the fire go outside. Until the early 1900s, most homes had one or more fireplaces as a source of heat for the residents of the house.

How much does a brick fireplace cost?

Brick Fireplace Average Costs The average fireplace installation cost is $2,500 to $5,000, although an authentic brick fireplace constructed by a mason could cost up to $10,000 or more. Installing a prefabricated brick fireplace costs $2,000 to $3,000. A mason-built brick fireplace costs $3,500 to $5,000.

Can I build a chimney on the side of my house?

Yes of course. There would be 2 ways of doing this, either use a twin walled rigid stainless steel factory made flue system which would be the more cost effective way or to build a brick built chimney stack.

How much does it cost to build a brick fireplace and chimney?

Brick Fireplace Costs Item Cost Mason-built fireplace $2,500-$5,000 New chimney $600-$2,000 Gas log kit $800 Labor (8-16) $640-$1,280.

How much does it cost to have a chimney built?

A new brick chimney costs anywhere from $60 to $200 per linear foot. A 15-foot chimney would cost $900 to $3,000. Installing a brick fireplace adds another $2,000 to $5,000 to the project, totaling $2,900 to $8,000.

What kind of fireplace does not need a chimney?

5 Types of Chimney-Free Fireplaces: Electric Fireplaces. Water Vapor Fireplaces. Ethanol Fireplaces. Ventless Gas Fireplaces. Gel Fireplaces.

Why do new houses not have chimneys?

Modern homes do not have enough draft in order to keep a wood fireplace lit. They will go out. This is because space heaters replaced fireplaces for energy efficiency, so new forms of insulation have replaced asbestos and fiberglass such as foam.

Can you use a fireplace without a damper?

Whether your fireplace is gas or wood-burning, if it was built with a pre-fabricated insert, then it almost certainly has a damper. And while older wood-burning fireplaces can function safely without a damper (gas fireplaces cannot), a chimney without a damper is just a gaping hole in the roof of your house.

What is a zero clearance fireplace insert?

Zero-clearance fireplaces are pre-manufactured fireplaces that can be installed almost directly against combustible materials like wood, walls, or panelling. The construction and materials of the firebox do not allow the outside temperatures of the firebox to affect those materials and do not require a hearth.

What is a chimney damper?

A chimney damper prevents conditioned (warmed or cooled) house air from escaping through the flue when you’re not using the fireplace. You need to open the damper when you start a fire to allow for proper airflow and let the smoke out.

What is a masonry fireplace?

Masonry fireplaces and chimneys are constructed on site from stone or brick and mortar, and are part of the home’s structural design. Typically, these fireplaces and chimneys are built as the house is built.