Table of Contents
How to Relight a Pilot Light: 5 Steps Find the pilot light assembly and its reset switch. The furnace’s pilot light is usually positioned at the bottom of the unit by a knob. Set the reset switch to off. Turn the knob to the “Off” setting. Wait a moment. Relight the pilot light. Observe the furnace.
Is it an emergency if the pilot light goes out?
Having the pilot light turn off is not automatically cause for panic. If it goes out, follow your manufacturer’s instructions and determine whether relighting it is safe. If relighting is not safe, or if your pilot light keeps going out, call for help from a trained technician.
What do you do when the pilot light goes out?
Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
Can you relight a pilot light on a furnace?
Turn the knob to “Pilot” and hold down the “Reset” button. Using a long lighter, bring the flame close to the pilot opening. This should ignite the pilot light. Once the pilot is lit, you can release the reset button.
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
Will gas company relight pilot?
Absolutely! We can send a gas service technician to light your pilot, and conduct a gas safety check of your gas fireplace or any other gas appliance to ensure your safety.
Why would a pilot light go out on a gas furnace?
Thermocouple Malfunction The thermocouple on your heating system is a safety device that determines whether or not your furnace pilot light is lit. A thermocouple that is dirty or malfunctioning will often shut off your gas supply in error, causing the pilot light to go out and your furnace to stop working.
How much does it cost to replace a thermocouple?
It costs $150 to $250 to replace a thermocouple. It checks to make sure the pilot light is on. It will shut the gas off if it’s not.
How do you fix a gas fire that keeps going out?
Easy DIY Fix: Gas Fireplace Won’t Stay Lit Before You Begin: Is Your Pilot Light Lit Inside Fireplace? The Fix: Pilot Light to Gas Fireplace Won’t Stay Lit. Check Your Thermopile Output with the TH/TP Contacts. Don’t Replace Your Thermopile or Thermocouple Right Away. Cleaning the Thermopile. Re-test the Cleaned Thermopile.
When did furnaces stop using pilot lights?
Why New Furnaces Don’t Have Pilot Lights? Up till about 2010, most furnaces came with pilot lights. After 2010, the trend shifted to electronic ignition systems (intermittent pilots or hot surface pilots).
How do you relight an automatic pilot light?
Press the gas control knob down all the way and hold it in the depressed position. If you have no igniter, move the match or barbecue lighter flame to the end of the pilot tube; the pilot flame should light immediately. If you have a spark igniter, press the ignition button until the pilot flame ignites.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter. The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
How do you know if pilot light is lit?
If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color. Pilot lights should always be blue.
How much is a pilot light for a furnace?
Running a pilot light for 1 hour costs about 1 cent (0.62 cent/hour for natural gas and 1.64 cent/hour for propane). Monthly costs of running a pilot light range from $4.49/month (natural gas) to $11.34/month (propane).
How do I turn my gas back on after disconnecting?
You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.
Who can you call to light a pilot light?
Instead, leave the house and call your local gas company or 911.
What is a pilot relight?
To relight the pilot light, you have to push a button that opens the value manually. Then you light the pilot light and wait for the thermocouple to heat up (about 30 seconds). Once it is hot, the thermocouple is generating the electricity needed to hold the value open. Then you can let go of the button.
How much does it cost to replace a furnace thermocouple?
Cost to Replace a Thermocouple on a Furnace Replacing a thermocouple costs $150 to $250, mostly due to labor time. On older models without an ignitor, it checks to make sure your pilot light is lit. If it’s not, it’ll shut the gas off.
Can I replace a thermocouple myself?
1 cause of pilot lights that won’t stay lit is a worn-out thermocouple. It’s easy to replace and a new one costs $5 to $10. Then detach the thermocouple from the burner and take it with you to the home center or hardware store to ensure you buy the right replacement.
