Table of Contents
What are socket tools?
Sockets are tools that attach to a rachet, torque, or socket wrench. It’s used mostly for loosening and tightening fasteners such as nuts and bolts. Once it’s secured to the ratchet the user can loosen or tighten a bolt or nut while the socket remains in place by just turning the handle of the ratchet.
What is the socket used for?
A socket is a tool that attaches on to the end of a ratchet, or socket wrench, with the purpose of tightening or loosening a fastener by turning it.
What are the 3 types of sockets?
Three types of sockets are supported: Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries. Datagram sockets allow processes to use UDP to communicate. Raw sockets provide access to ICMP.
What does a socket tool look like?
A socket wrench is most commonly a handle with a 90 degree ratchet, along with a set of cylinder shaped “sockets” of various sizes. The sockets fit onto the ratchet by way of a square nub. You can set the ratchet to either tighten or loosen, then keep the socket in place on the nut while you turn the handle.
What are the two types of sockets?
Sockets come in two basic types—connection-oriented and connectionless. These terms refer to types of protocols.
What can I use instead of a socket wrench?
What to Use if You Don’t Have a Wrench Duck tape. Two coins. Zip-tie. Another nut and bolt.
What are sockets in Australia?
In Australia the power plugs and sockets are of type I. The standard voltage is 230 V and the standard frequency is 50 Hz.
What are the most common used sockets?
⅜-inch drive size sockets are the most common and most available. They are used in many different industries and DIY projects, from assembling a gazebo to working on a bicycle.
What are the 5 different types of socket?
The presumed processes are used to interact between the same type sockets with no other limitations which stop the communication of different types of sockets. Stream Sockets. Datagram Sockets. Raw Sockets. Packet Sequenced Sockets. Hex Sockets. Socket Bit. Impact Sockets. Spark Plug Sockets.
How do you use sockets safely?
Check the Turning Direction Hold the socket in one hand and use your other hand to move the ratchet handle left and right. To loosen a nut or bolt, the socket handle should turn counterclockwise. To tighten a nut or bolt, the socket should turn clockwise.
What is the difference between a ratchet and a socket wrench?
Ratchets. A ratchet is a mechanical device that only allows movement in one direction. When it is equipped onto a wrench, it allows the user to set two turning directions: one where the wrench head is fixed and one where it spins freely. In fact, many may assume that a ratchet wrench is automatically a socket wrench.
Is socket wrench same as ratchet?
Wrenches. Ratchets and sockets are among the different types of wrenches designed for specific tasks. They perform the same functions as a conventional wrench — tightening and loosening fasteners. However, there are some tasks that suit a ratchet and socket particularly well.
What is socket in Internet?
Definition: A socket is one endpoint of a two-way communication link between two programs running on the network. A socket is bound to a port number so that the TCP layer can identify the application that data is destined to be sent to. Every TCP connection can be uniquely identified by its two endpoints.
What is a socket bit?
Socket bits are a combination of a bit, such as a screwdriver bit, and a hex socket. Socket bits connect to a turning tool such as a ratchet in the same manner as a hex socket, using a square drive socket.
Whats the difference between sockets?
A socket is a combination of port and IP address.Difference between Socket and Port? Socket Port It is used to identify both a machine and a service within the machine. The same port number can be used in different computer running on same software.
What are hex sockets?
A “hex” socket—short for “hexagonal”—is a socket that fits around a hexagonal (six sided) nut or bolt head. There are two types of hex sockets – six point and twelve point. The six-point hex socket has six points (angles) inside the bolt end, making a perfectly even hexagon.
Why do Australian outlets have switches?
Why Do Australian Power Points Have Switches? Australia has adopted switched sockets because they are safer. By flipping the switch to the ‘OFF’ position, you can prevent the current from flowing. This allows children to interact with sockets without suffering any dangerous shocks.
What plug is the same as Australia?
I Country Often uses same connectors as: Type of plug Australia Australia I Austria Germany C,F Azores India B,C,F Bahamas United States A,B.
What plugs are used in Austria?
For Austria there are two associated plug types, types C and F. Plug type C is the plug which has two round pins and plug type F is the plug which has two round pins with two earth clips on the side. Austria operates on a 230V supply voltage and 50Hz.
What order do sockets go in?
Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16).
