Table of Contents
How to Clean Vinyl Records Wipe gently. Remove all dust and static using a microfiber cloth, using very little pressure to avoid driving any particles further into the grooves in the vinyl. Rinse. Apply Simple Green solution. Damp-wipe clean. Dry. Spin and store properly.
How do you clean vinyl records yourself?
Mix 1/4 of 96-99% isopropyl alcohol, 3/4 distilled water, and one or two drops of rinse agent. The best way to do this is to add these ingredients to a spray bottle and shake well. Place the record on a microfiber cloth. Spray the solution on the record by making sure none of it gets on the label.
Is it OK to clean vinyl records with alcohol?
Wash The Record In particular, we recommend avoiding any that contain isopropyl alcohol. While it will clean the muck off your record, many people report that over time it’ll also damage the protective coating on your vinyl. If you are going to use a solution with isopropyl alcohol – use is sparingly.
Can you clean vinyl records with Windex?
Can you clean vinyl records with Windex? Yes, you can–but it’s not recommended. Ideally, if you’re going to clean records, you should use a proper record cleaning solution or a homemade solution that contains distilled water, one or two drops of regular dish soap, and one or two drops of isopropyl alcohol.
What is the cheapest way to clean vinyl records?
Dish soap is the cheapest option, but it will leave a bit of residue on your records. Record cleaning solution is a better choice, but a bottle will generally cost $20 to $30. If there are no fingerprints or other oily smudges on the record, you can get a way using just water, which is actually better for the record.
Can you clean vinyl records with vinegar?
Sum everything up, the best way to clean the record is cleaning vinyl records with vinegar. It is very good for cleaning. I use white vinegar and distilled water 50-50 for many years, it gives an excellent result. I highly recommend this to all vinyl lovers.
How do you make a vinyl record cleaner?
The exact mixture is one part isopropyl alcohol, one part distilled water, and one to two drops of dishwashing soap. This combination of fluids is widely recommended as an efficient mixture to clean records using what are household materials. The three ingredients were easy to measure and easy to mix.
Can I clean vinyl records with water?
Ideally, you want to use distilled water to avoid impurities from your tap getting into the grooves of the record. Try to avoid the label when cleaning with water. The brush helps remove dirt and impurities from the grooves of the record when you move it in a concentric motion, or along the same axis as the record.
What’s the best thing to clean vinyl records?
Dampen a clean microfiber cloth with water (distilled water is preferred), and lightly wipe the entire surface of the record in a circular motion with the grooves of the record, being careful to avoid the center label.
How do you restore old vinyl records?
You can spread wood glue over the top of your record as it spins on the turntable. Once it has dried, you are simply able to peel it right off. This may help repair scratches as well as pick up dirt and debris that is deep within the grooves of the record.
Can you fix scratched records?
Apply a thin line of epoxy or wood glue to the scratched area. If there are multiple scratches, apply glue to the entire record as it spins on your turntable. Place the tip of the glue bottle to the inner label of the record and lightly apply pressure. Stop once you’ve reached the outer edge of the record.
Can I use window cleaner to clean records?
Technically you can use glass cleaner or Windex on your vinyl records but it is debatable whether or not you should. A lot of vinyl users that have been around the block for a long time say that this is the only method they have used consistently.
Can you clean a vinyl record with a paper towel?
*For records that are really coated-with-grime dirty, soak a paper towel in your soap/water solution and rub the surface of the record well before starting with the brush cleaning. You can clean a LOT of records with that much solution. When you’re done with your cleaning session, toss the leftover solution.
Can you use wd40 on vinyl records?
WD-40 is a great vinyl record cleaning product. It does not contain any ammonia or alcohol, and it is a volatile solvent. After use, it will remove the dirt or dust, evaporate and leave behind a non-volatile lubricant. All you require is a lint-free cloth, the WD-40, and time.
How do I stop my record from skipping?
In most cases, the skipping will stop after you clean the record. If it persists, then use a magnifying glass and look carefully at the record. If you see any dirt lodged into the groove of the record, then use a record cleaning brush or a similar tool to remove it.
How often should you clean your records?
Stylus: If used regularly, the stylus should be cleaned weekly or even more frequently if you notice debris and dust on the record. Records: Your records should be cleaned regularly, especially when there is visible dust or debris on the record.
