QA

How To Start A Snow Blower

How do you start a snow blower that has been sitting?

How To Start A Snowblower That Has Been Sitting? Check If All Switches Are In The Right Position. Change The Gas And Add Stabilizer To It. Prime The Engine. Clean The Carburetor. Check The Fuel Line And Fuel Filter. Replace The Spark Plug.

Why will my snow blower not start?

The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the snowblower for a long period of time. This sticky fuel can clog up the carburetor and prevent the engine from starting. If the carburetor is clogged, try cleaning it with carburetor cleaner.

Should the choke be open or closed?

Generally, the choke should be closed for a cold start, opened for a warm start. Closing the choke, provides excess fuel which is not needed for a warm start. Excess fuel will quickly cause ‘flooding’ if cranking continues, even with a cold engine.

When starting a snowblower should the choke be open or closed?

If your snow blower is cold, you’ll want to pull out or turn on the choke while you’re starting it. This closes off the air supply to your carburetor, which makes for a much richer fuel mixture. If your snow blower is stored in a heated garage and is warm enough, you should not use the choke.

How do you tell if the choke is on or off?

The “choke” is off when the choke lever is down or when the choke lever is facing you if your choke is a handle bar mount. Choke off means that the choke plate is not covering the carb throat.

How do you start a snowblower with electric start?

Electric Start (Push Button) Snowblowers With an electric start, you simply plug your snow blower into an outdoor outlet with an extension cord, then push the start button. Once it’s started, you can unplug and go. Because snow blowers are used in cold weather, a battery would not function well.

What happens if you prime a snowblower too much?

Priming the engine moves fuel through the fuel lines and into the carburetor. Our Toro snowblower recommends pressing the primer button twice. We’ve found it actually requires more like 8-10 pumps to get going. Be careful not to over-prime, however, since it can flood the engine.

Where is the spark plug on a snowblower?

The spark plug on your snow blower should be easy to locate. It’s usually right on the top of the unit or under a cover. A spark plug is connected to the engine by the wire from the ignition system. It’s a necessary part to check when servicing your snow blower.

How do I clean a snowblower carburetor?

Snowblower Carburetor Cleaner Turn off the snowblower engine and leave it to cool. Remove the carburetor bowl, float bowl and flathead. Spray and clean the dirty carburetor with a carburetor cleaner, removing debris with a cloth. Let it sit to remove impurities.

How do I know if my carburetor is flooded?

Raise the hood of the engine compartment. Take the cover off the air filter housing by unscrewing the butterfly nut on top. This will give access to the top of the carburetor. A flooded carburetor will have a strong smell of raw gasoline.

How do you know if your snowblower is flooded?

Regarding the first issue, if the spark plug is wet, that means it has been flooded with fuel, which is not something you want. If you find the spark plug in this condition when you remove it, turn the engine over several times (with the spark plug still removed).

How do I know if my snowblower is flooded?

Check the Spark Plug and Ignition System Fuel on the Spark Plug: If there’s fuel on your spark plug it likely means you flooded your snowblower engine trying to start it, so simply clean the fuel off of your spark plug.

What does a choke do on a snow blower?

The choke on a gasoline-powered snowblower engine is designed to help the motor start when it is cold. The choke works by shutting the air intake to produce a richer gas mixture in the engine’s combustion chamber.

When should you use a choke on a snowblower?

Always use the choke to start a cold engine, turning to “Full Choke.” Check your Owner’s Manual for proper choke positioning. If the temperature is above 32 degrees, priming the carburetor may flood the engine easily so try only choking the engine.

What happens if choke is left on?

Leaving the choke on for too long will cause unnecessary engine wear and waste fuel. The engine needs its fuel to be vaporised in order to burn it. This is done by the carburettor where the fuel is mixed with clean air coming from the air filter, and sent into the pistons to be ignited.

Is it OK to run snowblower with choke on?

Less fuel equals less power, however as you found out, applying a choke makes the engine run smoothly. The reason for this is simple, and you’ve likely guessed it already, applying choke adds gas. Applying the choke replaces the missing fuel caused by the partially blocked carburetor.

What is full choke position?

FULL Choke means the choke is closed. This seals off the carburetor’s air supply in order to create a richer fuel mixture needed to start a cold engine. Move the choke back to RUN once the engine warms up.