Table of Contents
Typically, the actual thickness of plywood is 1/32 inch less than the nominal thickness.Thickness in millimeters. Thickness (inch) Thickness (milimeter) 5/16” 8mm 3/8” 9.5mm 7/16” 11.1mm 1/2” 12.7mm.
What is the actual thickness of 1/2 plywood?
Plywood is often sold in 1/4“, 1/2“, or 3/4” nominal thicknesses, but the actual thickness is often 1/32” thinner. Because the actual thickness may vary measuring the plywood is the only accurate way to determine its thickness. A 3/4” sheet is actually 23/32” thick. A 1/2” sheet is actually 15/32” thick.
What is the thickness of 1/2-inch?
1/2-inch (12.7mm) 5/8-inch (15.9mm)Aug 11, 2016.
What is the thickness of plywood?
The most common thickness of plywood is 1/2-inch, but plywood thickness can range from 1/8-inch to 3/4 inches.
What size is 3/4 plywood?
Birch Plywood (Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.728 in. x 23.75 in.
How much does a 4×8 sheet of 1/2-inch plywood weigh?
A typical 4′ x 8′ sheet of 1/2-inch Softwood Plywood weighs around 43 lbs.
What thickness is 15 32 plywood?
1/2-inch NOMINAL VS. ACTUAL SIZES 1/4-inch 11/32 1/2-inch 15/32 5/8-inch 19/32 3/4-inch 23/32.
Is half inch plywood really half inch?
The actual thickness is just like it sounds – the actual thickness of the plywood panels you buy, after sanding. Typically, the actual thickness of plywood is 1/32 inch less than the nominal thickness.Nominal and actual thickness. Nominal Thickness Actual Thickness 3/8” 11/32” 1/2” 15/32” 5/8” 19/32” 3/4” 23/32”.
What is the actual thickness of 1 inch plywood?
The standard thicknesses for plywood are 1 ¼, 1 1/8, ¾, 5/8, ½, 3/8, ¼, and 1/8 inches. The corresponding actual thicknesses are 1 ¼, 1 1/8, 23/32, 19/32, 15/32, 11/32, 1/4, and ⅛, respectively. This takes into the effect of sanding throughout the process of manufacturing the plywood for each of these sizes.
What is the actual size of a 4×8 plywood?
x 8 ft.; Actual: 0.438 in. x 48 in. x 96 in.) Sheathing Plywood (Common: 15/32 in.
How thick should plywood be for a shelf?
The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.
How thick should cabinet plywood be?
Use 1/4-inch plywood for the cabinet back unless it will support the weight of the cabinet, in which case 1/2 inch is a better choice. Select 1/2-inch plywood for drawer sides, fronts and backs, but 1/4 inch is suitable for drawer bottoms. Plain front plywood doors are rare, but they can be made from 3/8-inch plywood.
How thick should roofing plywood be?
Most roofs will be sheathed in plywood at least 3/8 inch thick. That will suffice on a roof with rafters set 16 inches apart with minimal roof loads. Loads will vary with the pitch of the roof; the flatter the roof, the greater the load on any one section. Steeper roofs will have lighter loads per square foot.
Is OSB stronger than plywood?
OSB and plywood offer similar (and sufficient) performance in terms of strength and functionality, though plywood is about 7% stronger. Plywood will absorb moisture quicker than OSB, but consequently it will also dry quicker.
What is BC plywood?
BC Plywood is a top quality product with a smooth surface. The BC simply means there’s one B-grade side sanded and smooth, backed by a C-grade side. BC Plywood is ideal for jobs that require a finished sanded product.
How thick is a 2×4?
A piece of surfaced (sanded smooth) 2×4 lumber actually measures 1½ inches thick and 3½ inches wide. In rough-cut condition, a 2×4 is slightly less than 2 inches thick and approximately 4 inches wide. When wood is milled from a rough to a smooth surface, it loses about ¼-inch from each of its four sides.
How much does a sheet of 1/2 inch treated plywood weigh?
In it, they state that softwood plywood should weigh approximately 3 pounds per square foot, per inch of thickness. Actual plywood sheets weigh slightly less, as the specification is for pre-sanded sheets.Softwood plywood weight chart. Thickness Actual Weight 1/4” 22 lbs 3/8” 28.5 lbs 1/2” 40.6 lbs 5/8” 48 lbs.
How much weight can a 1/2 sheet of plywood hold?
The lowest amount of layers (3 ply for 3/8” & 1/2”,4 ply for 3/4”, 5 ply for 1”) Plywood fixed at both sides, with the wood grain running parallel to the span.How Much Weight Can Plywood Hold? Free Calculator. Plywood Thickness Approximate Max Pressure 3/8″ 22psf 1/2″ 35psf 3/4″ 80psf 1″ 164psf.
How much does a square foot of 1/2 plywood weigh?
For example, 1/4-inch thick Baltic birch plywood is estimated at about . 8 pounds per square foot, weighing just over 25 pounds a sheet, while 1/2-inch-thick birch plywood is estimated at 1.5 pounds per square foot, and using the engineering formula, tips the scales at about 48 pounds.
Why is plywood sold in 32nds?
The reason un-sanded plywood, such as sheathing, is described as 15/32-in. thick is to reflect the manufacturer’s tolerance of 1/32 inch, even though in layman’s terms the sheet is equivalent to a 1/2-in. sheet of plywood.
What size is 19 32 plywood?
Sheathing Plywood (Common: 19/32 in. x 4 ft. x 8 ft.; Actual: 0.563 in. x 48 in.
What does 11/32 convert to in inches?
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch. Inches fractional decimal 11/32 0.34375 13/32 0.40625 15/32 0.46875.
