Table of Contents
Fireplace Parts & Terms Firebox. The firebox is the part of your fireplace that is typically inside of the wall. Mantel. The mantel is the top horizontal protruding shelf/ledge over a firebox. Mantel Shelf. The mantel may or may not have the depth or design to function as a shelf. Surround. Hearth. Corbel. Plinth.
What is the inside part of the fireplace called?
Firebox is the formal name for the inside of the fireplace – the place you build the fire. Of course, the firebox, composed of firebrick, is designed take the heat of the fire, but water damage, poor construction or simply just years of expanding and contracting can take their toll and joints can fail.
What is the thing called that holds the wood in a fireplace?
An andiron or firedog, fire-dog or fire dog is a bracket support, normally found in pairs, on which logs are laid for burning in an open fireplace, so that air may circulate under the firewood, allowing better burning and less smoke.
What are the parts of a fireplace and chimney?
The 7 Basic Parts of a Chimney 1 – Chimney Flue. The chimney flue and the chimney liner are sometimes the same thing and sometimes not, which makes these arguably the most confusing parts of the chimney system. 2 – Chimney Liner. 3 – Chimney Cap. 4 – Chimney Flashing. 5 – Chimney Crown. 6 – Damper. 7 – Smoke Chamber.
What do you call a fireplace surround?
Mantle/Mantel: Refers to the framework around the fireplace, especially the piece above the entablature that protrudes out (mantelshelf, mantelpiece).
What are fireplace tools called?
Types. There are three types of tools commonly used to tend a small fire, such as an indoor fireplace fire or yule log: the spade, the tongs and the poker itself. These tools make it possible to handle a fire without risk of burns or blisters.
What is the thing in front of the fireplace called?
Hearth. The hearth refers to the horizontal floor area of stone directly in front of the firebox opening. A hearth is usually as wide as the firebox and the legs combined.
What are fireplace andirons?
andiron, one of a pair of horizontal iron bars upon which wood is supported in an open fireplace. The oldest of fireplace furnishings, andirons were used widely from the Late Iron Age.
What are the parts of a fireplace mantel called?
The fireplace mantel comes in two major parts: the lower mantel and the optional overmantel. The main parts of a lower mantel include the shelf, legs, header, inner trim, and hearth. The main parts of the overmantel are crown and wall cladding tiles.
What is my fireplace surround made of?
One of the most common materials used for fireplace surrounds can be wood. Wooden fireplace surrounds are common because of their ease of installation and affordability. Wooden surrounds can be lighter, and cheaper to construct and transport and so they can be less expensive compared to masonry surrounds.
What is the back wall of a fireplace called?
Back (fireback)—The inside, rear wall of the fireplace of masonry or metal that reflects heat into the room.
What is a fire surround?
Fireplace surround refers to the part of the fireplace that protrudes from the wall and surrounds the opening of the fireplace. Mantel – the flat ‘shelf’ which sits horizontally above the fireplace opening.
Why do fire pokers have hooks?
The Dutch fire poker Dutch pokers may have a hook at the end to stir the fire more easily and for pulling wood towards you.
What is a fire blower called?
A bellows is a bag-like device with handles that’s used to blow air onto a fire to keep the flame burning. If you have a fireplace in your house, you might have a bellows too.
What are the different fireplace tools used for?
Ever wondered what the fancy-looking set of instruments next to fire are? These are known as fireplace tools. They can be used as an ambiance factor by adding an aesthetic touch to your fireplace. These tools are also used to maintain the fire, making it easier for you to clean and control.
What is the metal box in my fireplace?
What is a fireplace insert or box? A fireplace insert is a fireproof box that is surrounded by steel or cast iron. It can also be fronted by insulated glass. Steel or cast iron help trap heat where as some have blowers that push the hot air back into a room through vents.
What is the hole in my fireplace?
An ash pit is a hole in your firebox in which old ashes can be placed. Its convenient location allows you to sweep in any ashes and embers, then seal them in by closing a small door. Ash pits are designed to withstand the heat from your fireplace while being easily accessible for the homeowner.
What is the lever on the bottom of my fireplace?
What is this? The second handle you may find in your fireplace (usually located on the left inside panel) is a control lever for the outside air kit. When burning your fireplace, the outside air kit lever should always be in the open (or up) position.
What are the parts of an andiron?
Andirons are constructed of metal to hold flaming firewood slightly above the firebox floor to improve fireplace draw and ventilation. They typically stand upon two front legs connected to a central iron shaft, called a “dog” or “billet bar” which has a bent end to form the back foot.
Does a fireplace insert need a grate?
Does A Fireplace Insert Need A Grate? A wood burning fireplace insert will not typically need a fireplace grate, but should be confirmed with the manufacturer of the insert prior to doing so. Firewood can burn best when sat on a layer of ash, and a grate can take up important space within a fireplace insert.
