Table of Contents
Measure the width of the inside edge of the window frame from left to right in three places – the top, middle, and the bottom. Write down the smallest of the three widths down to the nearest 1/8”. If you have a 1/16” or 1/32” increment when measuring, round down to the nearest 1/8”.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
What is the width of a mini blind?
The size of the blind slats you choose really depends on your desired look and application. We offer 1 inch, 2 inch and 2 1/2 inch slats in most blinds.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How do you know what size blind slats to buy?
When picking a slat size for your blinds, you want to match the proportions of your window. Pick smaller slats for medium or small windows such a ½ to 1” wide slats. It is important that the blinds not overwhelm the space. Larger slats like 2 or 2 1/2” slats are better for larger windows.
Do blinds come in standard sizes?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches. However, window sizes and shapes can vary greatly, especially in older homes or homes with custom windows.
Can you put two blinds one window?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
How do you measure a window inside?
From inside the home, hold a tape measure in the top right corner where the horizontal and vertical window trim meet. Extend the tape measure diagonally to the lower left corner where the trim meets and record the measurement. Now make a measurement from the upper left corner to the lower right corner.
How far should a blind be from the window?
2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″. Some products may require more then 1-1/2″ above the window for mounting hardware.
How much room do you need for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
Does Home Depot custom cut mini blinds to size?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
Does Lowes cut blinds in store?
Minimum Inside-Mounting Clearance (for most brands) Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
What is the difference between mini blinds and regular blinds?
Simply put, mini blinds are window blinds that use slats that are less than half the width of standard blinds. Highly effective at controlling light – While mini blinds aren’t as effective at blocking out light as blackout shades, they provide ample light control for most homeowners.
How wide can horizontal blinds be?
The width of these blinds can be anywhere between 70” and 96”. It is sufficient for most windows. however, if you have windows that are larger then it is recommended to install a set of 2 or 3 blinds per headrail for better coverage and fit.
What are the different blind sizes?
Common window sizes include: Double Hung Window: Standard lengths vary from 36 to 72 inches, and standard widths extend from 24 to 48 inches. Picture Window: Standard heights range from 2 to 8 feet, and standard widths are 2, 3, 4, 5, 6 and 8 feet.
How do you buy mini blinds?
Measure the width of the inside edge of the window frame from left to right in three places – the top, middle, and the bottom. Write down the smallest of the three widths down to the nearest 1/8”. If you have a 1/16” or 1/32” increment when measuring, round down to the nearest 1/8”.
Should blinds be longer than window?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
