Table of Contents
Tinting all the windows of your car can take anywhere from two to four hours. Full-sized sedans take about one to two hours to install. If you only want to tint your two front doors, thirty to forty minutes is usually the time it takes to tint those windows.
How long should I wait to roll down windows after tint?
Do I need to wait to roll my windows down? We recommend that you leave your vehicle windows rolled up for at least 24 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.
Can I roll my windows down 2 days after tint?
In case you need to park the vehicle in shade, you can use a hair dryer to ensure a warm environment around the panes. As a thumb rule, wait for four days after installing the tint before rolling your windows down.
Does tint get darker after a few days?
The tint on your window does appear to get darker over the first few days or weeks after installation, but the key word here is “appear”. In actual fact, the tint remains the same shade. It’s the adhesive that changes. From there on out, your tint will ever so slowly get lighter as a result of sun bleaching.
Is it OK to wash car after tint?
Yes, you can wash your car after getting the windows tinted. The tint is applied on the interior part of the windows, and a car wash will clean your vehicle’s exterior! However, don’t wash or clean the interior part of the window just after it’s tinted. The window cleaning process is simple.
How do you know if a tint job is good?
To tell if a car has a quality tint, see how close the film comes to the window edge, and take note of how consistent and clean the line is. A top-notch installer uses computerized templates that pre-cut the film as much as possible, resulting in a line that’s close to the edge of the window pane and doesn’t waver.
Does tint bubble at first?
It’s common to see small bubbles under freshly-installed tint. Normally, these bubbles should go away within a couple of weeks and should be very small. They may take longer to go away in cold weather and vanish faster in heat.
Can I turn on AC with new tints?
Once you’ve had the films applied, do keep your windows closed in the daytime so the films can do their job blocking the UV rays. Let your air conditioner, not an open window, provide cool air.
Does tint block heat?
Metalized window tints help reduce heat by reflecting it away from your car. By reflecting the sun’s rays, metalized window tinting can reduce glare and block harmful UV rays. Not only does a metalized window tint reduce heat, but it also strengthens the windshield.
How can you tell if your tint is dry?
Even after a professional window tint, you may see a few tiny bubbles under the film and a haze on the glass. Streaks, haze, and bubbles are a normal part of the window tint drying process, so don’t worry! Bubbles can occur as moisture forms between the window and the film, but they will evaporate within a few days.
What happens if I roll down my window after getting it tinted?
A common question from customers who have just put tinted windows on their car, is “Why Can’t I Roll Down My Windows After Tinting?” The answer is that the adhesives holding the tinted window film in place take time to dry, and until they do, friction caused by rolling down the window could scrape film from the glass.
Do tints go on the inside or outside?
Does the tint go on the outside or inside? The short answer is on the inside. First, the film is laid on the outside of the car’s windows and cut out to fit. Those pieces are then placed on a large piece of glass and trimmed before being installed on the inside of the windows.
How long do bubbles stay in window tint?
In most cases, these bubbles disappear within two weeks, depending on the amount of sunlight that your car is exposed to. If the bubbles linger for longer than two weeks, it’s a sign of poor window film application.
How dark should I tint my windows?
If privacy is your purpose for tinting, a 20% tint is an excellent choice. You can see through windows with a 20% tint if you’re up close, but it’s still difficult. Typically, it’s enough to deter snoopers, though. When vehicles come with a factory tint, it’s usually between 15% and 20%.
What does fresh tint look like?
When your tint is first installed there will be some noticeable bubbles in the tint that may linger for up to a week or ten days, dependent on outside temperature and the amount of direct sunlight. These bubbles may look like golf ball dimples or appear to be streaky.
What should I look for in window tint?
For side and rear windows, the law states that the tinting material must: Have a light transmittance of 50 percent or more. Have a light reflectance of 13 percent or less. Allow total light transmittance of 35 percent or more.
Why is my window tint foggy?
For the first few days after your windows are tinted they might appear cloudy, hazy, and you may see little water pockets forming underneath the film. Tiny molecules of water are trapped between the film and the glass and evaporate over the course of a week or so.
