How To Clean Porcelain Tile Floors

Table of Contents

How to Clean Polished Porcelain Tile? Sweep your floors thoroughly. Grab your bucket and fill it up with 1 gallon of hot water then stir in ¼ cup of white vinegar. Go on and mop the floor with your vinegar solution. Finally, wipe off with clean water (not your solution) and dry with a towel.

Does vinegar damage porcelain tile?

The good news is that vinegar won’t damage your porcelain tiles as long as it’s used properly. This is because too much exposure to strong vinegar could strip away the finish on your porcelain. This will leave it more liable to damage and looking a bit worse for wear.

What can damage porcelain tile?

Regular use of corrosive chemicals can erode the surface of the tile, and increase its water absorption rate. Corrosive chemicals will also erode the grout, which will loosen the tiles and allow water to get beneath the tiles creating dampness. For everyday cleaning of porcelain tiles, just use warm water and a mop.

How do you make porcelain tile shine?

Polished Porcelain Tile Remove loose dirt. Sweep or vacuum loose dirt and dust from the floor. Wash. Mop the floor with a mild cleaning solution. Rinse clean. Rinse the porcelain til???? floor with clean and clear water thoroughly. Wipe dry. Dry carefully to increase the shine and to prevent water spots.

Can you use Swiffer on porcelain tile?

Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.

What do you clean porcelain with?

Using warm water, liquid soap, and a sponge, gently clean the porcelain sink. Remove any food, soap, or toothpaste build-up from the surface. This will allow you to identify any stains or scuff marks require a deeper clean. Wash away all soapy residue, and dry with a dish towel.

What is the best way to clean porcelain floors?

Can you use Pine Sol on porcelain tile floors?

We like using Pine-Sol® Original Pine Multi-Surface Cleaner on tile floors. It’s safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3′ x 3′ area and start mopping.

Why are my porcelain tiles cloudy?

A cloudy porcelain tile may be caused by damage to the glaze or coating, a build-up of dirt, water spots and streaks, or leftover cleaner. Try spot cleaning a small area and buffing it dry to see whether the cloudiness goes away.

Can you use Clorox wipes on porcelain tile?

Diluting bleach decreases the alkalinity and is safe for regular use on all types of porcelain and ceramic tile surfaces. Thoroughly rinse any cleaner from the surface and do not allow residue to dry on the tile and grout.

Can you use Murphy’s Oil soap on porcelain tile?

For the best results when tile and grout cleaning, choose cleaners wisely. Murphy® Oil Soap and other non-synthetic solutions are safe to use on tile and grout without wearing down either one, but other natural solutions include rubbing alcohol, particularly for more set spots of mildew.

How do you clean polished porcelain tiles without streaks?

One of the best cleaners for tiles is warm water, as it lifts the dirt easily. Mop with water first, then go over the tiles again with a water/vinegar mix (first making sure it’s okay to use acidic products on your tiles) and you’ll be good to go.

How do you keep polished porcelain tiles shiny?

Mopping the Entire Floor Once you’ve removed any possible stains or spots, it’s time to mop the entire floor. You can use the vinegar and water solution you mixed before to clean your tiles effectively. Vinegar is excellent on glazed porcelain as it brings out its shiny exterior without leaving a soapy film or residue.

Can you use Mr clean Magic Eraser on porcelain tile?

Magic eraser is compared to “sandpaper” and is restored when used with less to more aggressive pressure. On ceramic and porcelain tile it actually can “lighten your material” and expose the “finish” of that particular tile.

Can you use Bona on porcelain tile?

Yes, the Bona Hardwood PowerPlus Deep Clean Pad is safe for use on porcelain tile. You will also love our Bona Stone, Tile and Laminate Floor Cleaner or our PowerPlus Deep Cleaner on your porcelain tile floor, as long as your floor and/or grout is sealed or finished, and unwaxed or unoiled.

Are swiffers good for tile floors?

The Swiffer WetJet Spray Mop is a popular pick for cleaning tile, thanks to its simple, user-friendly design. However, it’s safe for use on any sealed tile and leaves no residue behind. It’s a best-selling floor cleaner for a reason and might be the easiest option for an all-in-one tile floor cleaner.

Can you use Windex on porcelain tile?

Tile cleaner Windex can also be used to clean tiles and grout, without causing any damage.

Can you use 409 porcelain tile?

All purpose household cleaners can be used on porcelain tile floors. Soapless detergents such as Spic and Span or 409 can also be used. It is recommended that a small test area be conducted with any cleaning product before applying it to the entire floor.