Table of Contents
When should you use a French drain?
When You Need a French Drain When you have a problem with surface water, such as a soggy lawn or a driveway that washes out. If water is getting into your basement. If you’re building a retaining wall on a hillside.
Is a French drain a good idea?
French drain systems are incredibly effective because, unlike typical surface drains, they collect water over the entire length of the drain as opposed to one dedicated area. The force of gravity helps to guide water along a reliably smooth path to a desired discharge point.
What is the difference between a French drain and a regular drain?
The Difference Between French Drains and Surface Drains. You’ll find that the primary difference between the two systems is that French drains deal with water that gradually seeps below the ground, while surface drains redirect water that’s accumulating above ground.
What is the difference between a French drain and a trench drain?
Aside from what we’ve listed here, the difference between a French drain and a trench drain is that a French drain is used for water that is underground while a trench drain diverts excess water from a surface.
Where do French drains go?
These drains are used to direct surface water or groundwater away from a specific area, such as a home’s foundation. French drains direct surface level water toward the lowest point and allow it to seep through the surface level gravel into the drain.
Where do French drains end?
Which End is Up? The two ends of a French drain system are: The drain field, or high end, where excess ground water enters the drain pipes. The drain exit, or lowest point, where water leaves the system.
Does French drain need an outlet?
A properly designed French drain system does not require an outlet. The water will simply soak into the soil as it flows along the perforated pipe. In fact, a French drain doesn’t require an inlet on just one end either.
Does a French drain need a pipe?
Officially a French drain is a gravel drain with no pipe. The water just collects in and travels through in a gravel or stone filled channel that starts from the surface or just below it.
How much should a French drain cost per foot?
According to Fixr, the average French drain costs $4,500. An exterior drain located fairly close to the surface could cost as little as $1,000, or $25 per linear foot on average. Drains installed under your basement floor could cost $2,000 or more. Expect to pay $60 to $70 per linear foot for installation.
What’s better than a French drain?
Swales or Valleys Swales, also called valleys, are an alternative to French drains that capture and divert rainwater. Swales are shallow ditches that do not contain pipes. You can usually find them along a property’s edge, following the natural grade of the land to direct runoff to ditches or wooded areas.
Can I dig my own French drain?
Because digging the trench can be difficult work on your own, get friends and family to help if possible. Once the trench is complete, installing a French drain is a straightforward process. The new drain will get runoff water under control, protect your basement and keep your yard from becoming a swamp.
Which is better French drain or swale?
French drains have a more functional purpose, as they are intended to keep water away from the foundation. Swales, on the other hand, are often recommended by landscapers as a general-purpose drain. Swales are sometimes not an option in urban areas because they require large lots to shape properly.
Can I cover a French drain with dirt?
Can I cover a French drain with dirt? Because a French drain has holes throughout the pipe which allow it collect water, you should not install dirt on top of the drain pipe. Installing dirt will clog the pipe and the holes, rendering it useless.
How long does a French drain last?
Properly installed drains use advanced plastic sheeting called geotextile to protect the drainpipe from a blockage. French drains can last decades before needing maintenance. If your home requires a sump pump, a high-quality model will last around ten years before needing replacement.
How shallow can a French drain be?
Add a Layer of Topsoil to Drainage Ditch Dig a trench along the outside of your footing. The trench should be at least 2 feet wide, and can be as deep as 6 feet for a basement or as shallow as two feet for a slab-on-grade home.
How do you tell if you have a French drain?
French drains are designed to collect rainwater and channel it downhill. If surface water is standing in low areas of the yard that are supposed to flow into your French drain, you have a drainage problem. If the low areas of your yard are as firm and dry as higher spots, then your French drain is working as expected.
How much water can a French drain handle?
Generally, a French drain should drop at least one percent in depth for every 100 feet of length.
How far should a foundation be from a French drain?
We recommend installing the french drains between 2 and 5 feet away from the foundation. There are a few variables that impact the exact distance to dig the new drain lines to carry water away from your home. Finding the right distance: Check where water is pooling naturally during heavy rains.
How do I get rid of standing water in my yard?
How to get rid of standing water Water wisely. This solution is for you if you notice puddles in your lawn or driveway even when it hasn’t rained recently. Dethatch and aerate. Add compost. Build a rain garden. Add a drainage system. Take care of gutters and downspouts.
How do I keep water from pooling in my yard?
Identify where you have standing water in your yard. Use a shovel to dig a trench in that area that leads to a place where the water can more easily drain. Line the trench with pea gravel. Purchase a French drain pipe or simply get a plastic, flexible landscape pipe.
How do I put drainage in my yard?
5 Yard Drainage Solutions You Can Do Yourself Reduce Your Watering Schedule. Extend Your Downspout. Dig a Creek Bed or Swale. Construct a Rain Garden. Install a French Drain and/or Dry Well.
Where do french drains go?
Where are french drains placed? French drains are placed either on the outside of a structure, or on the inside. In California, the inside version is less common, since these generally go inside basements, which few houses have.
Where do french drains end?
Which End is Up? The two ends of a French drain system are: The drain field, or high end, where excess ground water enters the drain pipes. The drain exit, or lowest point, where water leaves the system.
Which is better French drain or catch basin?
If you are trying to control moderate amounts of runoff and groundwater over a large area, install a French drain. To drain large amounts of runoff or surface area from a low spot in your yard, install a catch basin.
How deep do you have to dig for a French drain?
French drain depth: About 8 inches to 2 feet deep should be sufficient for many water-diverting projects, though related systems, such as those built around foundations and sub-ground living spaces, as well as the bases of retaining walls, may be deeper.
How long do french drains last?
Generally speaking, a French drain will last approximately 30 to 40 years.
Can I run a downspout into a French drain?
A French drain is actually a network of pipes laid in trenches dug beneath the ground through which water runoff can flow. This structure can be attached to your downspouts and will work seamlessly with your existing gutters.
What does a French drain help with?
A French drain can alleviate water issues by redirecting the water to a lower-lying area of your property, the street, a drainage ditch, a dry well or some other place.
