Table of Contents
Can I power wash TimberTech decking?
A power washer can be used for RINSING ONLY with TimberTech Deck or Porch. The recommended maximum pressure is 1,500 psi. A fan tip nozzle should be used. Spray in the direction of the grain pattern, never across the grain, to avoid damaging the product.
What is the best cleaner for composite decks?
Liquid dish soap (ammonia-free) is safe for use on cleaning your deck when mixed with a little warm water. Simply mix 1 gallon of water, 2 tablespoons of ammonia-free dish soap (such as Murphy’s), 1 pint of rubbing alcohol, and 1 quart of oxygen bleach. Be very careful so that you use only ammonia free dish soap.
How do you get stains out of TimberTech decking?
Timbertech decks have a fairly durable surface finish. You can rinse the deck surface without the risk of discoloration. For most stains, you can simply rinse off the deck with water from a hose and that will take care of the stains. If that doesn’t work, you can try a power washer.
What is the best way to clean AZEK decking?
To clean AZEK Deck/Porch, use an all-surface deck cleaner or another all-purpose cleaner such as Chomp Gutter cleaner, Zep 505, Simple Green or Krud Kutter Cleaner/Degreaser with a stiff natural fiber brush. Do not use abrasive cleaners which can dull the surface of new deck boards.
Can you use bleach on TimberTech?
For spot cleaning: A heavy-duty dish soap or wood cleaner and scrub brush. For all-purpose cleaning: TimberTech® DeckCleaner™. For all-purpose cleaning: TimberTech® DeckCleaner™. Note that the excessive use of bleach can damage the wood, leaving an unnatural whitewashed appearance.
Is Krud Kutter safe on composite decking?
Krud Kutter Deck & Fence Wash cleans all types of wood and composite surfaces to eliminate dirt, grime and mildew stains. Cleans and brightens without bleach or ammonia.
Can you use Dawn to clean composite decking?
Spray the deck with a hose to remove surface dirt and debris. Clean the deck with a soft-bristle brush and warm, soapy water. (Trex doesn’t specify a brand of soap, so a dish soap such as Dawn is a good choice.) The brush will ensure you’ll get any dirt in the embossed pattern.
Can you use OxiClean on composite decking?
Unlike chlorine bleach, OxiClean uses oxygen ions to clean, which are safe for use on composite decking. SimpleGreen uses biodegradable non-toxic ingredients, which aren’t as harsh as bleach and other cleaners, making it safe for use on composite decking.
Is OxiClean good for cleaning decks?
OxiClean is safe to use on decks. When cleaning your outdoor deck, the oxygen bleach is a much better alternative than chlorine bleach as it cleans any deck surface without causing discoloration or damage to plants, shrubs, soil and similar surroundings.
Can you power wash composite decking?
PRESSURE WASHING YOUR COMPOSITE DECKING Pressure washing is not usually recommended for composite decking. Pressure washing too close or using too much pressure can be ruinous for your deck. Composite decking material is softer than natural wood and therefore can be “etched” more easily.
Can you use bleach on composite decking?
Most manufacturers will warn you that Bleach will fade colored composites especially when used in direct sunlight. Regular use of Chlorine Bleach can eventually lead to premature chipping, splintering, and cracking that can affect the structural integrity of your composite deck.
How do you clean AZEK composite decking?
To clean AZEK Trim, power wash or hose off any loose dirt or debris. Always test the setting for the power washer to ensure it will not damage the surface of the trim. If the surface does not come clean, use TimberTech Deck Cleaner™ and a medium nylon bristle brush. Rinse clean with a hose or power washer.
Can you put salt on TimberTech?
Both Azek and Timbertech allow you to use rock salt or calcium chloride on their CPVC and composite decking. Just make sure you get the kind that is safe for concrete, plants etc. Leaving the salt on the deck may result in pitting or white stains. You should never use salt of any kind on wood decks.
How do you remove rust from composite decking?
For existing rust marks on the surface of your composite decking that cannot be removed by scrubbing with water, it is recommended to use deck cleaners containing oxalic acid or phosphoric acid. These deck cleaners are formulated to protect the surface of your decking while removing rust stains.
How do I clean my deck with vinegar and baking soda?
Vinegar and baking soda are a power couple when it comes to natural cleaners. To clean your deck, combine 1 cup vinegar with 1-gallon water. Sprinkle baking soda on any mildewed wood and use the vinegar and warm water to scrub over all the boards.
How do you get paint off Trex decking?
Spray the painted or stained area on the Trex with the Krud Kutter, then let it sit for a few minutes. Next, scrub it lightly with a plastic brush until the paint is removed. Lastly, rinse the affected area with water. That’s it!May 9, 2016.
