Table of Contents
1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How many 50lb bags of concrete do I need for a fence post?
For reference, a 40-pound bag of concrete typically yields about 0.3 cubic feet, a 50-pound bag yields 0.37 cubic feet, a 60-pound bag yields 0.45 cubic feet, and an 80-pound bag yields 0.6 feet. This means that in the example above, each post would require about eight 50-pound bags.
Is cement required for fence posts?
Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.
What is the best concrete mix for fence posts?
For a small to mid sized job I recommend going with premixed. The best concrete mix for fence posts I’ve found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It’s 4000 psi, easy to work with, sets up fast, and doesn’t need to be mixed. Just pour it in the hole and soak with water.
How many bags of concrete do I need for a 4×4 post?
A six foot high fence post with a 4 inch post would need a hole that’s 36 inches deep by 12 inches in diameter. To fill a hole this size takes 5 bags of 80lb concrete, but remember, you have to subtract the volume of the post your burying.How Much Concrete For A 4×4 Fence Post? Depth 50 Lb Bags 24″30″ 4 32″36″ 5.
How many square feet does a 50 lb bag of quikrete cover?
Regarding this, how much does a 50 lb bag concrete cover?, as 133 lb concrete = 1 CF, so a bag of 50 lb concrete = 50/133 = 0.375 CF, therefore, a 50 lb bag of concrete approximately cover around 1.5 square feet area upto standard depth of depth of 3 inch for your patio and sidewalk.
How many bags of cement do I need for 12×12?
of 40lb bag = 1.76 ÷ 0.011 = 160 bags. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yields, at 5 inch thick, for a 12×12 slab you will need 2.22 yards of concrete, so number of 80lb bag of concrete = 2.22 ÷ 0.022 = 100 bags, No.
How much post mix do I need per post?
How much Post Mix do I need for a fence post? The exact amount of Post Mix Concrete needed will vary depending on the width and depth of the hole, but as a general rule you’ll need about one and a third bags for a standard fence post.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
How many bags of Sakrete are in a post?
At least 2 bags per fence post, sometimes more depending on the It does what its supposed to do. At least 2 bags per fence post, sometimes more depending on the size of the hole and the post.
What size post do you use for a 6 foot fence?
So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For our six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter. The depth of your post hole plays a key role in the strength of your posts.
How deep should a 8 foot fence post be?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
How many bags of concrete do I need for 100 square feet?
Number of cement bags are required for 100 sqft 6 inch slab = 11.4 bags.
How many bags of cement are in a cubic yard?
Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards. 80 pound bag yields .022 cubic yards.
How much area can one bag of cement cover?
60 cubic feet. One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about . 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by .
How many bags of cement do I need for a 10×10 slab?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
How much concrete do I need for a 10×10 slab?
The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.
