Table of Contents
Can you still buy fluorescent light fixtures?
While the discontinued products may no longer be manufactured, they can still be sold until existing supplies are gone. In the meantime, consumers are likely to pay a premium for the lamps themselves, but also more in utility costs because these technologies use more energy.
How much does a fluorescent light fixture cost?
To replace an existing ceiling fixture with a new 36-inch, two-tube fluorescent one, an electrician will charge $241, which includes the labor and cost of the fixture. If you have electrical skills and tools, you can make the swap for $95, the cost of the fixture, and save 60 percent.
What can you replace fluorescent lights with?
Replacement choices include pendant lighting, flush-mount ceiling fixtures, track lighting, monorail lighting, potrack lighting and more. You can even skip the ceiling-mounted light and instead install a couple of wall sconces.
Are T8 and T12 sockets the same?
The main difference between T8 and T12 tubes is the tube’s diameter. T12 tubes are 1.5″ in diameter while T8s are just one inch. All other things—socket sizes, lengths, distance between pins—are the same. T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine.
Will a T8 fit a T12?
T8 tubes are simply 1 inch in diameter versus the 1.5 inch diameter of T12 tubes. In an effort to make LED tube lights compatible with the internal dimensions of most fixtures, you will find that most LED tube lights feature a T8 or 1 inch diameter. They can indeed be used in T12 fixtures.
Is it cheaper to replace ballast or fixture?
A replacement ballast costs about $10-25 depending on capacity and brand. The bite is that an electrician trip charge (which includes 30 or 60 minutes work) is going to be $75-150 probably – for about 5 minutes work on each light fixture.
How much does it cost to replace fluorescent lights with LED?
Replacing incandescent and compact fluorescent lamp (CFL) bulbs with LED bulbs will cost about $4 – $8 for a 10-Watt LED. Therefore, if you change 24 bulbs, it will cost $96 – $192 to replace those all at once. You can usually find bulk discounts when purchasing multiple LED bulbs.
Can you replace a ballast yourself?
The ballast takes in electricity and then regulates current to the bulbs. You can get a new ballast at a hardware store or home center and install it in about 10 minutes. However, buying a ballast can be expensive, so consider pricing a brand-new fixture for comparison.
Can I replace fluorescent tubes with LED?
Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.
How can I make my fluorescent light fixture look better?
One way to make fluorescent light look better is to use colored film to cover lights, changing the spectrum that reaches your eyes.
Can you replace 4 foot fluorescent bulbs with LED bulbs?
The simplest is to completely replace old fluorescent fixtures with brand-new LED fixtures. However, LED fixtures to replace four-bulb (8-foot-long) fluorescent fixtures (common in farm buildings) can set you back $100 or more per unit.
How do you remove fluorescent light covers without clips?
If your kitchen is lit by a single fluorescent bulb instead of several, its cover may be held in place with a nut on the side. Use pliers or a wrench to twist this nut counterclockwise. When it comes off all the way, you can slide the bulb cover away from the nut.
How do you remove a 4 foot fluorescent light cover?
Removing a Wraparound Fluorescent Light Cover The sides of the lens sit on a ledge with a small lip, and you can push it out of place easily. To remove a wraparound fluorescent light cover, simply grab one long side, push up, and then pull it down.
How do I know if I have a T8 or T12 ballast?
If no markings are available, the size in diameter of the tube is the easiest way to determine the type you have installed. T8 tubes are 1-inch in diameter and T12 tubes are 1 1/2 -inch.
What’s better T5 or T8?
The T5 has a better lumen-to-watt ratio than the T8, implying that its output is more efficient and brighter per watt of energy used.
What is better T12 or T8?
The smaller the lamps the more energy efficient they are. T8 bulbs use about 35% less electricity to produce the same amount of light as a T12. For some applications, one T5 bulb can replace two T12 bulbs, providing even greater energy savings (a process called “de-lamping.”)Oct 9, 2015.
What is a Balaster?
ballast – A device required by electric-discharge light sources such as fluorescent or HID lamps to regulate voltage and current supplied to the lamp during start and throughout operation.
How do I know what type of ballast I have?
You can determine whether you have a compatible fixture in seconds. Simply turn the light on, then take a photo of the fixture using your smartphone or digital camera. If there are no dark bands on the resulting image, you have an electronic ballast that will work with direct drop-in LED tubes.
Can I replace a T12 ballast with a T8?
The easiest and lowest price option to replace a T12 is a T8 linear fluorescent. They have become the go-to option for pre-existing T12s. If you still have magnetic ballasts, switching to a T8 will require a ballast swap. Another option is to move forward with an LED retrofit.
