Table of Contents
Beginner’s Guide to Spa & Hot Tub Care Test and adjust your spa water balance 2-4 times per week. Clean the spa filter every 1-2 weeks, and replace annually. Keep the spa clean; drain and refill every 3-4 months. Air out the spa cover twice per week. Add water as needed to keep the spa full.
What chemicals are needed to maintain a hot tub?
The basic chemicals for hot tub maintenance include a pH increaser, pH decreased, and sodium dichlor chlorine granules.
What do you put in a hot tub after every use?
Shock the spa using dichlor chlorine at a ratio of 1.5 tablespoons dichlor per 250 gallons. Test water with chlorine test strips, waiting until chlorine level has dropped below 5ppm before using the spa. After each use, add 1 tablespoon Oxy Spa per 250 gallons.
How difficult is it to maintain a hot tub?
Is a hot tub HIGH maintenance? Not really. It just requires a basic understanding of water chemistry and a simple schedule (which we’ll dive into), but it’s not expensive. All you really need is some chemicals and testing supplies which is about a $20/month investment.
How do you maintain a spa for beginners?
Clean the filter cartridges properly and regularly with chemical cleaners rather than just hosing them off. But take care with the chemicals; add them to the water rather than adding water to them. Let the filters cartridges dry before returning them to the spa.
Should I leave my hot tub on all the time?
One question we sometimes get asked is should I leave my hot tub on all the time? The answer is yes! Hot tubs are designed to be left on permanently and this is how they work best. Of course, they’ll need to be drained regularly but for the most part, they are left on 24/7.
How do I keep my hot tub water crystal clear?
How to Keep Hot Tub Water Crystal Clear Get A Good Cover. Covering your hot tub when it isn’t in use is one of the best ways to keep dirt and other detritus out of the water. Shower Before Entering. Use A Skimmer. Keep Up with Your Water Testing. Add the Proper Chemicals. Empty, Clean and Refill. Clean and Change Filters.
How often should you change the water in a hot tub?
Change Your Spa Water Every 3-4 Months, Here’s Why: That water is saturated. The same thing starts to happen as the hot tub’s water gets “older”. The water will start to get hazy and you might even experience grit on the shell.
What temperature should you keep your hot tub when not in use?
While it may sound like common sense to turn your hot tub down every time it is not in use, it’s actually better to maintain a constant soaking temperature, which is typically around 100° Fahrenheit for many people.
How often should you put chlorine in a hot tub?
A chlorine level of between 3-5mg/l must be maintained in your hot tub at all times. The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).
Is owning a hot tub worth it?
For most people, a hot tub is worth the money if you use it regularly—and don’t mind spending the time and energy it takes to maintain it. A hot tub can be a fabulous luxury. However, an unused hot tub is an expensive waste of energy, and a poorly maintained one can pose health risks.
How often should a hot tub be serviced?
So why do hot tubs need servicing? Like cars, to keep your hot tub running smoothly, it’s recommended it is professionally serviced on an annual basis. Servicing helps keep your hot tub in optimum condition.
How soon can you use hot tub after adding chemicals?
Do not use a hot tub right after you add chemicals. You should wait at least 2 hours before using the hot tub again. The chemicals need time to work their magic and sanitize the water. Also, a higher concentration of chlorine is best because you’ll need to add chemicals less often.
How do I know if my hot tub has bacteria?
If your hot tub smells funky, there may be some bacteria lurking in the water—even if it looks clear and clean. Trust your nose and use your test strips to diagnose the problem. If your hot tub has a musty odor, this is a sign that there isn’t enough sanitizer in the water.
Do you put chlorine in a hot tub?
You should put chlorine in your hot tub at least once a week. However, some people prefer to add a small amount after each use. Finding the best water care routine will depend on how often and how many people use it. Chlorine levels should be between 1.5 and 3.0 ppm.
How can I maintain my hot tub without chemicals?
Here’s how. Replace Your Filter Cartridge More Frequently. Drain Your Spa or Hot Tub More Frequently. Ozone + Minerals. For a spa that doesn’t use chlorine or bromine, you need something to kill bather waste and bacteria. Non-Chlorine Shock. Ozone + minerals can do most of the job. Keep Your Spa Water Balanced.
Should I turn my hot tub down at night?
Hot tub temperature when not in use Turning off your hot tub isn’t necessary as this can use more energy when reheating it and will be less cost efficient. You will still need to check the chemical balance during this time.
Should I turn my Lay Z spa off at night?
Leave Your Lay‑Z‑Spa Heater Activated Between Uses Depending on the amount you use your Lay‑Z‑Spa, in our experience it is better to leave the heater activated all of the time, if used regularly ‑ say 3 or more times per week.
Can you turn off hot tub in winter?
Shutting It Down If you decide that you’d rather have your hot tub shut down during the winter, that’s OK too. But make sure this is done properly to avoid expensive damage to the spa’s internal components.
