Table of Contents
Maintain Your Floors Sweep, dust or dry mop daily. Vacuum weekly. Clean heavy-traffic areas with a damp mop twice a month. Clean with recommended hardwood floor cleaner once a month. Apply a fresh coat of finish every three to five years. Sand and refinish every 10 years.
What is the best way to clean finished hardwood floors?
How to Clean Hardwood Floors For best results, sweep or dry-mop daily (or as often as you can), paying attention to corners, nooks, and crannies. Vacuum your floors with a vacuum cleaner that does not have a beater bar. Water should never be used to clean your hardwood floors, and wet-mopping should be avoided.
How do you clean varnished hardwood floors?
Sweep or vacuum-clean your wood floors as often as needed. Use Bona’s mild, specially formulated Wood Floor Cleaner for the best results. Do not use ”all-purpose” cleaners on your wood floors, as they tend to leave a dull residue. You normally end up using too much water as well, which is damaging to your wood floors.
Is it safe to use vinegar to clean hardwood floors?
Just don’t use vinegar and water to clean hardwood floors. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.
How do you clean hardwood floors after refinishing?
Post Project Clean-up ???? After refinishing hardwood floors, be prepared to thoroughly vacuum and wipe down every last surface. This includes every square inch of your walls. I highly recommend a vacuum with a new filter, as well as these microfiber cloths.
Should I use Murphy’s oil soap on my hardwood floors?
For a deep, conventional cleaning, consider using a concentrated product like Murphy® Original Formula. Whether you’re cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Can you use Pine Sol on hardwood floors?
We like using Pine-Sol® Original Pine Multi-Surface Cleaner on hardwood floors. You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
How do you remove smudge marks from hardwood floors?
Dip a corner of the sponge in the bowl of baking soda and water solution and rub the smudge in a circular motion to remove the scuff mark. Re-dip the sponge if the smudge is large and requires more scrubbing. Wipe the area with the damp paper towel to remove traces of the baking soda and water solution.
Can you use washing up liquid to clean wooden floor?
To clean wooden floors effectively, you should sweep or vacuum the surface before mopping the floors with a cleanser specifically designed for wooden floors. Washing up liquid is not ideal for this task and can leave behind a film on the flooring.
How do you clean lacquered wood floors?
Use a soft mop or cloth and two buckets of hand-warm water, one with plain water and one with cleaner/lacquered wood care. Rinse the mop in the water bucket and use cleaner mix for mopping, as dirty water can leave an unsightly residue on the surface.
What should you not put on a hardwood floor?
Avoid using water and vinegar, soap-based cleaners, wax or steam cleaners on hardwood floors. Vinegar and water can dull the floor’s finish over time, while soap and wax leave a residue. Steam cleaners put heat and excessive water on your floor, which can lead to cupping and long-term damage. Use mats.
Can you use dish soap to mop wood floors?
How to clean wood floors. Begin by dusting or sweeping your floors well. Then make a cleaning mixture using 4 cups warm water and a few drops of castile soap or dish soap. Do not shake, but gently mix this, then mop or scrub small sections at a time, drying them with a clean cloth or dry mop after.”Nov 21, 2019.
Does Bona wood floor cleaner disinfect?
Bona PowerPlus Antibacterial Hard-Surface Floor Cleaner uses the power of hydrogen peroxide to effectively clean and disinfect floors. When used as directed, it can clean up to 99.9% of household germs.
Will Swiffer ruin hardwood floors?
You can safely use Swiffer products on hardwood floors. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won’t damage them.
How long do you have to stay off hardwood floors after refinishing?
How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.
How do you clean floors after refinishing?
Begin regular cleaning after seven days. Sweep the floor daily to remove surface dirt. Mop it once weekly with a hardwood floor cleaner. Avoid using water and soap on the hardwood floor.
Is Orange Glo good for hardwood floors?
Orange Glo Hardwood Floor Everyday Cleaner is a water-based, non-toxic cleaner that will clean dirt and grime from your floors, leaving them looking shiny and new. Along with using it on your floors, you can also use it on cabinets, wood furniture, paneling, and other hardwood surfaces throughout your home.
What’s the best mop for hardwood floors?
The Best Mop for Hardwood Floors of 2022 O-Cedar EasyWring Spin Mop & Bucket. CLDREAM Wet /Dry Spray Mop. BISSELL PowerFresh Steam Mop. Bona Premium Spray Mop. MANGOTIME Dust Wet Floor Mop. Swiffer Sweeper Dry /Wet Floor Mopping Starter Kit. Jinclean Industrial Class Cotton Mop.
How do you get rid of bona residue?
Use an ammonia solution: An ammonia solution of 1 cup ammonia per gallon of water can be used to dissolve the buildup that’s causing the haziness of your floors. Remember to use this solution carefully since you don’t to do any further damage with excess water.
