Table of Contents
CDX is the grade of plywood most commonly used for roofing (CDX plywood means it is Construction Grade for exterior purposes).
What kind of plywood would you use on roof?
Exterior Plywood is the preferred material for roofing. It also performs well when exposed to moisture over long periods of time. The price is low compared to other roofing materials and the installations are also easy.
What thickness of plywood is used for roofing?
Most Common Thickness The most common rafter spacing is 24 inches, and 5/8-inch plywood is recommended for that. It will support roof loads for most situations and is the standard for most roof applications. Roofs with very heavy loads may require 3/4-inch thickness.
What kind of plywood do you use for a shed roof?
Most builders use 15/32 CDX for the roof; it is an exterior-grade plywood with a thickness just under 1/2 inch. The floor needs to be more solid than the roof to support lawn maintenance equipment and people. Use sturdy, 3/4-inch-thick exterior plywood for the floor.
What grade of plywood is used for roof sheathing?
1/2 or 3/4-inch Plywood for Roof Sheathing? – Traditionally, 1/2-in CDX plywood was common choice with 24-in rafter spacing. However, heavier roof loads may require the use of 3/4-in CDX plywood for roof sheathing. Roofs with less pitch often carry heavier loads, including snow and ice accumulations in the winter.
What is the best thickness for roof sheathing?
The recommended thickness for roof sheathing is ⅝” thick. Sheathing with a thickness of less than that is much more likely to result in bowing between framing which could potentially compromise your exterior roof material.
What is better for roofing OSB or plywood?
Plywood Holds the Moisture Advantage Over OSB When plywood gets wet, it tends to swell. OSB takes longer than plywood to get saturated, but also takes much longer to dry out. When used as roof sheathing, this tendency to hold moisture means it will degrade faster than plywood when exposed to chronic leaks.
How much is a sheet of roofing plywood?
The thicker the plywood your roofer uses, the more expensive the job will be. Your price could vary depending on how much the roofing company charges for labor, but generally, you can expect to spend between $70 to $100 for each sheet of plywood.
What’s the best wood to use for a roof?
Cedar has earned a reputation for being strong, flexible, and weather resistant – qualities that make for an effective roofing shingle. Among roofing shingle manufacturers, cedar is the go-to material, all thanks to its durability.
What can I use for roof sheathing?
Oriented Strand Board (OSB) or plywood can be used, although plywood will provide higher nail head pull-through resistance. Use panels rated as “Exposure 1” or better. Install sheathing panels according to the recommendations of the Engineered Wood Association (APA). Use panels no smaller than 4 feet long.
What thickness OSB for shed roof?
Typically 3/4″(18mm) for floors and 3/8″ (9mm) for walls and 1/2″ (11mm) roof. Also make sure that you get your supporting timbers at the correct spacing.
What is the best wood for a shed roof?
thick plywood works well for wall and roof sheathing, but use at least five-eighths in. plywood for your shed floor. Ordinary exterior-grade plywood is made with weather-resistant glue, but the wood itself is not particularly rot resistant. This is why pressure-treated plywood is best for a shed floor.
Is 7/16 OSB OK for roofing?
Standard types of wood designed for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, without edge support, can be used in an area where the snow load is 30 pounds per square foot.
Is CDX plywood good for roof sheathing?
Moisture Differences In reality, CDX plywood can only withstand water for a short period of time. Do not use CDX for roofing, sheds, or other places that are exposed to moisture consistently. The sole exception to this is pressure treated CDX, which can survive for decades without even a protective coating.
Should you use tongue and groove OSB for roof sheathing?
Tongue & Groove Boards T&G roof decking, however, looks classy and rich. In fact, T&G boards are most frequently used when the sheathing is visible from the inside such as in cathedral ceilings or in some cabin-style homes, especially if the span of the rafters is greater than 2 feet.
Do you need plywood under shingles?
Sometimes referred to as roof sheathing or a roof deck, this plywood acts as a foundation for the layers of underlay and the shingles on your roof and connects the roof to the frame of the house. Even though it isn’t visible, it is very important to the structure of your home.
How many sheets of plywood do you need for a roof?
Divide the total roof area by 32 to get the number of sheets you will need to cover the roof. A typical 4 foot by 8 foot sheet of plywood covers 32 square feet. If your roof area is 1,600 square feet, 1,600 divided by 32 will mean you need about 50 sheets to cover the roof.
Which is cheaper plywood or OSB?
OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.
Do you need H clips roof sheathing?
H-clips are referred to in the APA Guide as “edge support.” For the most common roof sheathing in our area, which is 1/2” nominal (7/16” actual) sheathing over trusses or rafters at 24” on center, there is no requirement for H-clips. One or two H-clips will often allow a longer span between roof trusses/rafters.
What is the difference between sheathing and sanded plywood?
Sheathing: Standard construction plywood used for wall sheathing, roof decking, floor structures (subflooring) and general rough construction where looks and surface imperfections aren’t important. Sanded plywood: General-purpose “project” plywood with decent-looking face veneers that have been sanded smooth.
