Table of Contents
Metric / Standard Wrench Conversion Chart Bolt Diameter Metric Standard 1/8″ 8mm 5/16″ 3/16″ 10mm 3/8″ 1/4″ 11mm 7/16″ 5/16″ 13mm 1/2″.
How do I measure a socket drive?
Drive Hole indicates the size of the drive hole (also referred to as the “driver hole” or “square hole”), which determines the torque size of the driver tool you’ll need. For example, you’d use a ½-inch drive socket with a ½-inch drive ratchet. L indicates the overall socket length.
What socket is smaller than a 5 16?
SAE Socket Sizes Chart 3/8″ Drive 1/4″ Drive 1/2″ Drive 1/4″ 5/32″ 3/8″ 5/16″ 3/16″ 7/16″ 3/8″ 7/32″ 1/2″ 7/16″ 1/4″ 9/16″.
What is a 28mm socket in standard?
28mm = use a 1 1/8″ socket. 29mm = use a 1 1/8″ socket. 30mm = use a 1 3/16″ socket. 31mm = use a 1 1/4″ socket. 32mm = use a 1 1/4″ socket.
What are socket sizes in order?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).
What is the order of wrenches?
Note: Each wrench may combine two sizes.Wrench Size Chart for Bolts. Search Search in Bolt Diameter Wrench Size (SAE) Wrench Size Metric Bolt Diameter Wrench Size (SAE) Wrench Size Metric 1/8″ 5/16″ 8mm 3/16″ 3/8″ 10mm 1/4″ 7/16″ 11mm.
What’s the next step up from 5 16?
Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16).
What is socket size drive?
The drive socket size is a measurement of the distance between the flat sides of the square recess. The drive socket size must match the drive square size of your turning tool for the socket to fit correctly. For example, a 1/4″ drive or 1/4″ square drive will attach to a turning tool that has a 1/4″ drive square.
How do I know what size socket wrench I need?
Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.
What are SAE sizes?
Common SAE socket sizes 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 11/16″ 3/4″.
What sizes do adjustable wrenches come in?
Adjustable wrenches should be included in every professional toolbox in the following sizes: 6-inch, 8-inch, and 12-inch wrenches. These sizes are suitable for a variety of tasks.
How do wrench sizes work?
Spanner. The width across flats indicates the “size” of the spanner. It is imprinted on the spanners in millimeter (mm) values. Older British and current US spanners (wrenches) have inch sizes that are imprinted in intermediate sizes in fractions.
What is the metric conversion for 5 16?
SAE to Metric Conversion Chart SAE Metric Inch 5/16″ 0.313 8mm 0.315 11/32″ 0.344 9mm 0.354.
Is 5/16 or 8mm bigger?
MM Approximate Size In Inches Exact Size In Inches 6mm Just short of 1/4 Inch 0.23622 Inches 7mm Little over 1/4 Inch 0.27559 Inches 8mm 5/16 Inch 0.31496 Inches 9mm Just short of 3/8 Inch 0.35433 Inches.
What is a 29mm socket in standard?
29mm. 1-1/8″ 32mm. 1-1/4″ 7/8″Apr 9, 2020.
Is a 19mm socket the same as 3 4?
19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.
What are metric socket sizes?
Metric sockets: Ideal for working on imported vehicles, metric sockets’ sizes are measured in millimeters. The most commonly used types are 8 mm, 10 mm and 14 mm sockets.
What is the largest wrench size?
The one aspect that puts the adjustable wrench ahead is the 78 mm which the wrench can expand to. But overall, the Cheater Wrench is a better tool.30-inch Adjustable Wrench VS Cheater Wrench. 30” Adjustable Wrench Cheater Wrench Cost $434.11 $129.37 Length 30 inches 15 inches.
What does SAE stand for in wrenches?
SAE or Standard: A standard or SAE (Society of Automotive Engineers) wrench is measured in fractions of inches. Small wrenches will be around 1/4 inches, while large wrenches will be 1 inch or larger. Metric: A metric wrench will work with nuts and bolts that have a metric measurement.
What size ratchets are there?
Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.
What SAE and metric sizes are the same?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
How do I know what size nut I have?
If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut. If the nut is US standard, count the smallest lines on the tape measure in sixteenths. Add the sixteenths together to find the size.
Is the diameter of a bolt the same as the wrench size?
When ordering a bolt you will need to determine. bolt diameter, thread pitch, and bolt length. Technician A says that the diameter of a bolt is the same as the wrench size used to remove or install the fastener.
What size nut takes a 15/16 wrench?
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt. US Bolts Bolt Diameter (in) Head and Wrench Size (in) 1/2 3/4 7/8 9/16 13/16 5/8 15/16 1 1/16.
