Table of Contents
Shipping Additional Board-Feet < 10 10 – 99 Red Oak 4/4 Red Oak (Sel & Btr, 15/16) $4.40 $4.00 8/4 Red Oak (Sel & Btr, Rough) $6.00 $5.40.
How much does OAK cost?
Domestic Prices Measurement Type of Wood Under 100′ 4/4 Red Oak rough & S2S to 15/16″ $4.00 4/4 Q-sawn Red Oak $5.75 4/4 Q-sawn Red Oak 12-16″ wide 12.00 4/4 Rift Only red Oak $6.50.
How much is a white oak board?
$11.99 /Board Feet 1-99 $11.99 /Bd. Ft. 100+ $8.99 /Bd. Ft. (25% off).
What is board foot price?
Hardwoods are sold by the board foot, which is a calculation of the wood volume in the board. A board foot indicates a volume quantity equal to a board 12 inches by 12 inches by 1 inch, or one-twelfth of a cubic foot.
How much is red oak?
Red Oak Lumber Red Oak Lumber Prices per Board Foot as of Feb 20, 2022 Description 100-249 B.F. 250-499 B.F. 4/4 Red Oak 6.80 4.30 Flat Sawn 5/4 Red Oak 6.95 4.45.
What is the cheapest wood board?
Wood quality The very cheapest boards, furring strips, are usually very rough, with rounded edges and lots of imperfections. More expensive wood planks will have much straighter edges, less warping, and a smoother finish.
How do you calculate board feet?
The basic calculation for board feet is: Thickness x Width x Length / 12 = Board Feet. 2 x 4 x 10 / 12 = 6.667 Board Feet. A 2 x 10 -16′ has 26.67 board feet: 2 x 10 x 16 / 12 = 26.667 Board Feet. PCS x T x W x L / 12 = Board Feet. 84 x 2 x 8 x 12 / 12 = 1,344 Board Feet. 1.25 x 6 x 14 / 12 = 8.75 Board Foot.
Is white oak expensive?
Though flooring prices can fluctuate depending on width and grade, in general for any planks 5” or larger, White Oak is usually a bit more expensive. As Red Oak trees tend to be more abundant, the price of Red Oak flooring can actually be more affordable, so it may be well worth your while to consider choosing Red Oak.
What does white oak weigh per board foot?
Weights of Various Woods (pounds per 1000 board feet) Species Lumber Wood Oak, white 5,200 5,580 Pine, jack 4,200 4,500 Pine, loblolly 4,500 4,860 Pine, longleaf 4,250 4,590.
Is Oak wood expensive?
Oak wood is expensive because it is a hardwood. Hardwoods are more dense and durable but grow much slower than softwood which makes them more expensive. Although on a grand scale of all existing woods, oak is on the more expensive side because it is classified as a hardwood, oak is one of the cheapest hardwoods.
How is board foot price calculated?
Here’s how to calculate the cost of your order: The number of square feet of a piece of lumber is calculated by multiplying the length (in inches) by the width (in inches) and then dividing by 144. Example: Calculating the total cost of a piece of lumber 6″ wide by 46″ long at a price of $6.30 per square foot.
What is the price of lumber per 1000 board feet?
Lumber is expected to trade at 1017.47 USD/1000 board feet by the end of this quarter, according to Trading Economics global macro models and analysts expectations.
How much is red oak per foot?
Red Oak. The average cost for red oak flooring is between $8 and $13 per square foot. It has a reddish, tightly visible grain and is exceptionally durable.
Is oak or cedar more expensive?
Cost Differences Between Oak and Cedar Eastern red cedar retails for around $6.29 per board foot, with red oak coming in slightly cheaper at $5.49 per board foot. On the other hand, white oak is considerably more expensive, at $9.99 per board foot.
Has price of Red Oak gone up?
Red oak lumber prices are reportedly the highest they have been in more than two years, and as of this writing is continuing to climb. Though good quality timber still commands the most attention, lower quality sales are also selling as well.
Will lumber prices drop in 2021?
Lumber will be strong through 2021 and this drop in lumber prices is great news for homebuilders and real estate developers alike if they choose to take advantage of their low rates now.
What is the strongest wood?
Australian Buloke – 5,060 IBF An ironwood tree that is native to Australia, this wood comes from a species of tree occurring across most of Eastern and Southern Australia. Known as the hardest wood in the world, this particular type has a Janka hardness of 5,060 lbf.
How much does a 2×4 stud cost?
Lumber Prices Board Stud* 16′ 2×3 2×4 $5.17 $12.62 2×6 $8.82 $17.62.
What is 200 board feet in square feet?
A 600 board foot kit will cover 600 square feet at 1 inch thickness or 300 square feet at 2 inches thick; a 200 board foot kit will cover 200 square feet at 1 inch thickness, and so on.
How many board feet are in a 4×8 sheet of plywood?
Find the square footage of each space and add together to find the total square footage needed. Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2.
What is a board foot of lumber?
1. Hardwood lumber is typically sold by the board foot, a unit of volume equivalent to a board that is one inch thick, one foot wide and one foot long, or 144 cubic inches. These units refer to nominal or roughsawn dimensions, not surfaced dimensions.